SilentPower LAN iPurifier Pro Ethernet Filter User Manual
- September 10, 2024
- SilentPower
Table of Contents
SilentPower LAN iPurifier Pro Ethernet Filter
OUTLINED
Thank you for purchasing the LAN iPurifier Pro from SilentPower. The LAN iPurifier Pro is an Ethernet Filter with Optical Isolation. The LAN iPurifier Pro offers a seamless, plug-and-play mechanism designed to enhance the connection between the router or switch and the network streamer, significantly improving audio and video streaming quality. The LAN iPurifier Pro utilizes Optical Galvanic Isolation technology to effectively isolate and eliminate electrical noise and interference emanating from the router or switch, which in turn, minimizes system noise, errors, and jitter. The LAN iPurifier Pro is compatible with a wide range of network devices, such as 4K media boxes and media streaming PCs, ensuring an experience free from jitter and noise.
FEATURES
- Optical Galvanic Isolation to isolate electrical noise and interference, reduce system noise, errors and jitter from the router or switch
- Employs cutting-edge tech including adaptive equalisation, error correction, and crosstalk cancellation, ensuring a cleaner signal
- Ultra-low noise internal DC-DC power supply design
- Supports 1000BASE-T (IEEE 802.3x) Ethernet
USB-C (5V) Power
Please connect the LAN iPurifier Pro to the supplied power adapter or other
USB-C 5V/1A power adapter.
STANDARD NETWORK PORT SECTION
Each network port supports input and output, and the standard network port (2) is recommended as the input port.
STANDARD RJ45 Ethernet Port
Connect a network cable with a RJ45 connector. This is a standard RJ45
Ethernet port without optical isolation and is recommended for use as an input
port.
LED brightness setting buttons
This button cycles through 3 brightness modes (see item 5-8): Screen
Brightness (Short press)
High/Low/Off
OPTICAL ISOLATED NETWORK PORT SECTION
Each network port supports input and output, the OPTICAL ISOLATED network port
(4) is recommended as the output port.
OPTICAL ISOLATED RJ45 Ethernet Port
Connect a network cable with a RJ45 connector. This is the RJ45 Ethernet port
with optical isolation, recommended to be used as an output port for better
network signal quality.
Power On/Off
The LED shows the current power connection status of the LAN iPurifier Pro.
LED Status
- On Normal
- Off No connection
Network Connection Speed LED
The LED shows the current network transfer speed of the LAN iPurifier Pro.
Network Connection Status LED
The LED shows the current network transfer status of the LAN iPurifier Pro.
Optical Connection Status LED
The LED shows the current optical isolation status of the LAN iPurifier Pro.
LED Status
- On No Data
- Flashing Data
- Off No Connection
SPECIFICATIONS
- STANDARD Ethernet Port: RJ45
OPTICAL ISOLATED
- Ethernet Port : RJ45
- Ethernet: IEEE 802.3x
- Speed Supported : 1000/100/10 Mbps
- Devices Supported: General-purpose, notebook, switch, router, wireless device, etc
- Isolation Voltage : 5KV RMS
- Power supply requirement: USB-C 5V/1A*
- Power consumption : 3.7W
- Dimensions : 99 x 92.8 x 24.2 mm (3.9″ x 3.7″ x 1.0″)
- Net weight : 241 g (0.53 Ibs)
- Limited warranty: 12 months**
- 12 months typical or as permitted/required by local reseller laws.
- A power supply unit must be able to deliver minimum rated repetitive current See FAQ at silentpower.tech for more information. Specifications are subject to change without notice.
Cautions
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the LAN iPurifier Pro.
Prolonged Heat Exposure
Your LAN iPurifier Pro may become very warm during normal use. This is normal
and nothing to worry about. Also, it is very important to keep it in a well-
ventilated environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>