STONE FIELD 54806-003-05 Tube 3 LED Cross Tak Lampe Gull Instruction Manual
- July 16, 2024
- STONE FIELD
Table of Contents
**STONE FIELD 54806-003-05 Tube 3 LED Cross Tak Lampe Gull Instruction Manual
**
Pre-Installation
PLANNING THE INSTALLATION Read all instructions before assembly and installation, Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
TOOLS REQUIRED
-
Phillips Screwdriver
-
Flathead Screwdriver
-
Knife
-
Wire Cutter
-
Percussion drill
-
Chopping bit Dia 6 mm
-
Ladder
-
Safety Goggles
Installation (Make sure to turn off the main power)
Step : 1
Step : 2
Step : 3
Step : 4
Operation
- Turn on power at the circuit breaker or fuse box.
- Turn the light switch on to activate the fixture.
Package contents (parts are not to scale):
| Part | Description | Quantity |
|---|---|---|
| A | Fixture body with wire | 1 |
| Ei | Wall expansion particle | 2 |
| C | Self-Tapping screw | 2 |
Light source
Max. LED 31W 2230Lumen 3000K (Dimmable) (Lamp gurantee: 3 years)
Care and Cleaning
EXTERIOR MAINTENANCE
- To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water. never a solvent) to wipe the surface of the fixture.
- Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>