Galayou G7 Indoor Home Security Camera Installation Guide
- June 9, 2024
- Galayou
Table of Contents
Galayou G7 Indoor Home Security Camera
Product Diagram
What’s in the Box
Indicator Lights Status
| Light Status | Camera Status |
|---|---|
| Blue light on | Camera is powered on |
| Blue light flashing | Connecting to Wi-Fi |
| Blue light solid | WIFI connection succeeded |
| Blue light quickly Hashing |
- Reset camera to factory setting
- Camera Is upgrading firmware
Warm note: Please make sure your router is connected to Internet.
User’s Guide
-
Download and Install
Go to the App Store or Google Play to search and download the “Wansview Cloud” APP on your smartphone. Or scan below QR code to get the APP.
-
Register Account
Open the “Wansview Cloud” APP and register an account with your email and activate it.
Tips: Your password must be S-16 characters, and contains at least the following three categories: numbers, uppercase letters, lowercase letters, or special characters. -
Add G7
Tips:
- This indoor security camera onlyworbwith2.4GHz Wi-Fi, 5GHz Wi-Fi is not supported!
- Please put the camera near to the router during setting up the camera, after connection succeeds, you can place the camera in another place.
Note: Put the camera close to the route,{3 feet) during setting up the camera.
FAQ
The camera can not canned to Wi-Fi?
Please press the reset button on the camera for 5 seconds until the blue light
flashes quickly and the camera says “reset Is successful”, Please wait for
about one minute, then the camera will flash blue light slowly and you can
reconnect it now.
How to share the camera to another account?
- The Invited member should download the Wansview Cloud app, and register a new account first.
- The main account should open the Wansviewcloud app, tap ·settings-Invite family members-press choose Country and then enter the invited member’s account.
- The invited member needs to open the Wansview cloud app and then click “Receive”. if he/she doesn’t receive the invitation, please close the app and then open It again.
Where is the micro SD card slot?
Please format the SD card to FAT32 on your computer. After formatting the card
successfully, please Insert the SD card to the camera slot on the side of the
camera. (Capacity8FB-128GB) 
Manufacturer: Shenzhen Golden Vision Technology Development Co., Ltd
Address: No.6 BaoFu Road, Shangmugu community, PingHu town, Longang,
Shenzhen, China
After-service:
support.us@galayou-store.com
support.uk@galayou-store.com
1-323.fie&-3288 (US only)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>