VICTROLA VPT-1500 Wireless Record Player User Guide
- June 15, 2024
- Victrola
Table of Contents
VICTROLA VPT-1500 Wireless Record Player
TURNTABLE SETUP
SET THE SLIPMAT ASIDE AND PLACE THE PLATTER ONTO THE TURNTABLE.
ROTATE THE PLATTER UNTIL THE HOLE WITH THE GUIDE STRING IS DIRECTLY OVER THE
MOTOR SPINDLE AS SHOWN.
CAREFULLY REMOVE THE TAPED GUIDE STRING AND USE THE STRING TO STRETCH THE BELT
OVER THE MOTOR SPINDLE.
ONCE THE BELT IS INSTALLED AROUND THE MOTOR SPINDLE, DISCARD THE GUIDE STRING
AND PLACE THE SLIPMAT ON THE PLATTER.
INSERT THE HEADSHELL INTO THE TONEARM AND TIGHTEN THE TONEARM COLLAR COUNTER- CLOCKWISE UNTIL THE HEADSHELL IS SECURE.
ORTOFON 2M SERIES:
(VPT-2500)
PUSH THE STYLUS COVER TAB DOWN / FORWARD AND GENTLY SLIDE THE COVER OFF.
AUDIO TECHNICA VM95 SERIES:
(VPT-1500)
GENTLY PULL THE COVER OFF OF THE CARTRIDGE.
SLIDE THE COUNTERWEIGHT ONTO THE TONEARM UNTIL THE FRONT OF THE COUNTERWEIGHT
IS ALIGNED WITH THE BACK GROOVE ON THE TONEARM.
Note: Remove the two foam blocks from the tonearm before installing the
counterweight.
ONCE ALIGNED WITH THE CORRECT GROOVE, TURN THE TOP SCREW CLOCKWISE TO TIGHTEN
THE COUNTERWEIGHT.
Note: You may need to adjust the anti-skate if you notice distortion,
skipping, or looping during playback.
USE THE SPEED SELECTOR KNOB TO SELECT YOUR RECORD SPEED.
PLACE THE 45 RPM ADAPTER ON THE SPINDLE NEXT TO THE SPEED CONTROL TO STORE
WHEN NOT IN USE.
OPERATION GUIDE
POWER ON
single press button
|
---|---
SWITCH OUTPUT
single press button switch between RCA output and Bluetooth output
|
POWER OFF
press and hold button (1 sec)
|
LED COLOR GUIDE
RCA MODE
flashes white (3x) then solid white
|
---|---
BLUETOOTH MODE
Ready To Pair flashing blue
Connected solid blue (2 sec) then solid white
|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>