MUNBYN P941 Voice Intelligence Thermal Label Printer 4×6 User Manual

P941 Voice Intelligence Thermal Label Printer 4×6
User Manual

P941 Voice Intelligence Thermal Label Printer 4×6

Version: 1.01

Product Introduction

Thank you for choosing our thermal printer. Our product is capable with Windows, Mac, and Linux. Before using the printer, please take a few minutes to read this manual. It will guide you to set up the printer to best fit your needs.
1.1. What’’s in the Box
When you receive the package, open,and check the items in it.

A Printer C Adapter E Quick tips B USB Cable DPower Cord F Labels G User Manual
Figure 1-1 What’sin the Box

1.2. Product Overview

1.3. Quick Printer Connection

1. Ensure the switch is OFF
2. Connect the power cable to the printer
3. Plug in the power cord
4. Connect the USB cable to the printer
5. Connect the USB cable to the PC
6. Turn the power ON

1.4. Label Setup

Automatic Label Recognition: Open the top cover button, load no less than 4 consecutive labels into the printer, and close the top cover. After the paper feeds stably, press and hold the feeder button until hearing one “beep”, and the printer will automatically recognize the label.

1.5. Function Buttons

Table 1-1 Function Buttons

Press and hold the button until hearing one ‘beep’: Automatically label identification.
Press Press and hold the button until hearing two ‘beeps’: Print the self-test label.
Press Press and hold the button until hearing three ‘beeps’: Activate the voice.
Press and hold the button until hearing five ‘beeps’: Reset the printer.
2| Printer Status Light| Green| Ready to print or printing.
Red – Blinking (Every 1s)| The cover is not closed.
Red – Blinking (Every 2s)| Label paper is not identified.
Green and Red – Alternating| The printer head is overheated.
3| Wi-Fi/Bluetooth Connection Status Light| Blue| The printer’s Bluetooth is connected.
White| The printer’s Wi-Fi is connected.
4| Switch| | Power ON/OFF.
5| Top Cover Button| | Open the top cover.

1.6. Voice Command
Table 1-2 Voice Command

and the printer’s voice wakes up (if there is no command within the 30s, the printer will sleep and say “I’m leaving. Call me next time”).
Print test page| The printer responds loudly “Print test page” and prints the self-test page.
Learn label| The printer responds with the “Learn label” and automatically identifies the loaded label.
Take one label| The printer responds with “Take one label” and pulls out one label.
Printer reset| The printer responds with “Printer reset” and reset.
Turn off voice| The printer responds with “Turn off voice” and the voice function is off.

Note:

1. The voice will be activated automatically out loud with “welcome to the MUNBYN printer” after the machine is powered on; The printer top cover is open, automatically out loud with “cover is open”; No label loading in the printer will automatically out loud with “out of paper”.
2. After the voice function is off, press the feeder button until you hear three ‘beeps’ to reactivate the voice.

iOS/Android Connection

Search Munbyn Print on Google Play or App Store to get the app or scan the QR code to download and install the application.

http://47.88.4.165:7005/common/qrCode.html

|

https://munbyn.biz/P44Svideo?r=qr

---|---

Note: After opening the app, select allow the app to locate permission (Android only) and use the phone’s Bluetooth permission.

Windows/Mac/Linux Connection

Note: To use the P44S printer on a PC, please install this printer driver in advance.

1. Get the latest driver from this link: munbyn.biz/P44SD
2. If your system is updated, please reinstall the driver to ensure that the printer can be used normally.
   3.1. Before Installing
3. To connect the printer, refer to section 1.3 for a quick printer connection.
4. Place the thermal label paper into the printer and power it on. For paper loading, refer to section 1.4.
   3.2. USB Windows Printer Installation

1. Double-click Munbyn-Windows-Driver-Latest-Wifi-v1.1.1.
   Munbyn-Windows-Dtiver-Latest-Wifi-fl Jlexe
   Figure 3-1 Windows Printer Driver Installation Package

2. The computer pops up a prompt to check the printer is connected, click OK.

3. Select Next.

4. Click Install, wait for about 3s, and the setup is finished.

5. The “Open Help Document” automatically checked, which is a P44S FAQs document. Then click “Finish” to exit the setup and the printer is ready to use.

6. Print a test page to verify the driver has been set up successfully as per the following steps.

3.3. USB Mac Printer Installation

1. Double-click Munbyn-Mac-Driver-vl.l.l.dmg.
2. Chose the Open and Install Driver, then double click MunbynPrinter_v1.1.1_signed.pkg.
3. Follow the prompts to complete the installation, as shown in the figures below.

3.4. USB Linux Printer Installation

1. Right-click the munbyn-ubuntu-driver folder, then select Open in Terminal.
2. Enter the installation command: sudo sh Munbyn_Driver_Ubuntu.run, then press the Enter key on the keyboard.
3. Enter the password of the computer and then press the Enter key on the keyboard to finish the installation.

3.5. Wi-Fi Windows Printer Installation
Note: To use the P44S printer on a PC, please install this printer driver in advance.

1. Get the latest driver from this link: munbyn.biz/P44Swind

2. If your system is updated, please reinstall the driver to ensure that the printer can be used normally.
   Search Munbyn Print on Google Play or App Store to get the app or scan the QR code to download and install the application.

   http://47.88.4.165:7005/common/qrCode.html

|

<https://munbyn.biz/P44Svideo?r=qr>  

---|---

Notes: After opening the app, select allow the app to locate permission (Android only) and use the phone’s Bluetooth permission.
3.6. Wi-Fi Mac Printer Installation
Note: To use the P44S printer on a PC, please install this printer driver in advance.
1)Get the latest driver from this link: munbyn.biz/P44Smacd
2)If your system is updated, please reinstall the driver to ensure that the printer can be used normally.
Search Munbyn Print on Google Play or App Store to get the app or scan the QR code to download and install the application.

<http://47.88.4.165:7005/common/qrCode.html>

|

<https://munbyn.biz/P44Svideo?r=qr>  

---|---

Notes: After opening the app, select allow the app to locate permission (Android only) and use the phone’s Bluetooth permission.

Product Specification

Table 4-1 Product Specification

Operating
Environment| Temperature: -10 to SO C
Humidity:10-90%(non-condensing)
Storage
Environment| Temperature: -40 to 80C
Humidity: 5-95%(non-condensing)
Connection| USB/Wi-Fi
Weight| 815g
Dimension| D 198mmW 82mmH 93mm

FCC Statement

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However,there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.
– Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions
(1) this device may not cause harmful interference,and
(2) this device must accept any interference received, including interference that may cause undesired operation.This equipment complies with FCCradiation exposure limits set forth for an uncontrolledenvironment.

MUNBYN, More choices for your growing business

Scan the QR code for Facebook online chat
https://www.facebook.com/munbyn/

Contact us
MUNBYN provides an 18-month warranty and lifetime free service.
If you encounter any issues with the product, please contact the MUNBYN team to
promptly receive troubleshooting tips or a replacement.
Email : support@munbyn.com (24-7 online support)
Website www.munbyn.com (how- to videos)
WhatsApp: +8617817881067
Phone: +1 650 206 2250

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>