SW-MOTECH GPT.13.849.60000 Urban ABS Topcase System Instruction Manual

SW-MOTECH GPT.13.849.60000 Urban ABS Topcase System

ADVENTURE-RACK

Thank you for choosing this premium product from SW-MOTECH. Please carefully read and understand all instructions, safety messages and warnings in these mounting instructions prior to installation and use of this product to avoid injury. This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required (e.g. ABE certifications), are also available for download at our webshop. Keep these mounting instructions as reference.
SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work!

SAFETY ALERT SYMBOL

•  This safety alert symbol is used throughout these mounting instructions to warn of the possibility of death, bodily injury or other warnings. The words DANGER, WARNING and CAUTION are used with this safety alert symbol to convey important safety messages and information related to the installation and use of this product. These words along with the safety alert symbol mean:

•   DANGER:
  Indicates a hazardous situation that, if not avoided, will result in death or serious injury!

• WARNING:
  Indicates a hazardous situation that, if not avoided, could result in death or serious injury!

•   CAUTION:
  Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury!

• NOTICE:
  Important information, but not death or injury related (property damage only)!

•   WARNING:
  The installation and/or maintenance of this product requires advanced mechanical skills, the proper tools, and a thorough understanding of tool use and torque specifications.For your own safety, SW-MOTECH recommends having installation and/or maintenance carried out by a qualified and certified motorcycle mechanic.

• WARNING:
  Should you choose to self-install this product, carefully and completely read all intallation and safety instructions before installation and use, and follow all the directions and safety precautions given in the mounting instructions to avoid serious injury or death. Also pay attention to all relevant information in the vehicle manual during intallation and use. IF YOU DO NOT UNDERSTAND ANY PART OF THESE INSTRUCTIONS, OR NEED CLARIFICATION OF ANY INSTRUCTION, DO NOT ATTEMT TO MOUNT THIS PRODUCT WITHOUT CONTACTING SW-MOTECH FOR ASSISTANCE.

• PREPARATION:
  Read the mounting instructions carefully and make sure that all items of the parts list are included.

• CAUTION:
  Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the engine/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools and wear always safety glasses and hand protection. Have another person help you.

• MOUNTING:
  All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturer specifications or replaced by parts and hardware delivered by SW-MOTECH.

• WARNING:
  Secure all threads, unless otherwise specified, with medium- strong strength liquid thread locker. Torque specifications undefined by SW-MOTECH must be obtained from the vehicle manufacturer or by a certified motorcycle workshop!

• FUNCTION CHECK:
  After installation also make sure that no moving parts are obstructed, and function of the vehicle is not hindered in any way. Cables and hoses must not rub and/or be pinched.

• WARNING:
  Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all connections and the proper fit of the product. Installed accessories can change driving behavior/stability of the vehicle.

Note:
All measurements in millimeters. b The second number indicates the total quantity of the part in the delivery. c No torque specifications: Use the torque defined by vehicle manufacturer! The standard torque in this table can be used as long as it is within the vehicle manufacturer‘s specifications.

WARNING:
Always wear eye and hand protection!
WARNING:
Always use appropriate tools! Remove the shown screws on both sides of the vehicle from the mounting points.

Attach the mounting brackets (1) on both sides to the vehicle.

WARNING:
Use liquid thread locker! Do not fully tighten the screws yet.

Attach the mounting bracket (10) to the mounting brackets (1)zaza.

WARNING:
Use liquid thread locker for screw (11)! Once all parts are aligned without excess tension, tighten the screws as specified.

NOTICE:
Depending on the available space, attach the luggage rack to the marked mounting position (A) or (B), as shown in the detail drawing! Attach the luggage rack (15) to the mounting bracket (10).

WARNING:
Use liquid thread locker! Tighten the screws as specified.
NOTICE:
In order to mount the luggage rack together with the SW-MOTECH PRO side carrier or the SW-MOTECH SLC side carrier, use the screws(*) from their sets. Attach the mounting brackets (1) on both sides to the vehicle.

WARNING:
The indicated maximum load is inclusive the weight of topcase/luggage and adapter kit! The maximum vehicle load specified by the manufacturer must not be exceeded!
NOTICE:
Observe the country-specific regulations concerning vehicle registration/operation as well as TÜV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.

adapter plate for STREET-RACK

Thank you for choosing this premium product from SW-MOTECH. Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required (e.g. ABE certifications), are also available for download at our webshop. Installation and/or maintenance of this product require good technical understanding! For your own safety SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger the driver! These mounting instructions are written based on our current state of knowledge. Legal requirements for accuracy do not exist. This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behaviour and/or stability of your vehicle.

GENERAL INFORMATION

Observe the country-specific regulations concerning vehicle registration/ operation as well as TUV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
PREPARATION:
Read the mounting instructions carefully and make sure that all items of the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
MOUNTING:
All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturer · specifications or replaced by parts delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with a medium-strength liquid thread locker.
Torque specifications undefined by SW-MOTE CH must be obtained from the vehicle manufacturer or by a specialist workshop!
FUNCTION CHECK:
After installation make sure that all parts and connections previously removed are properly replaced. Also make sure that no moving parts are obstructed and no function of the vehicle is hindered in any way. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all screw connections and the proper fit of the product.

ADVENTURE RACK
NOTE:
BEFORE attaching the mounting bracket (1 ], insert the screws {] supplied with the ADVENTURE-RACK into the rear openings. The screws {] can be tightened after attaching the mounting plate through the cutouts. Attach the mounting bracket [1 I to your ADVENTURE RACK [sold separately). as shown in the drawing.
ATTENTION:
Use liquid thread locker (screws (2) only)! Tighten the screws as specified in the parts list.

URBAN ABS top case for STREET-RACK

Step [1]: Open the lid and inner zipper of the top case (1].
Step [2]: Flip up the inner lining.
Step [3]: Attach the locking system (41 under the top case (1]. Pay attention to the position of the locking lever (closed]. Tighten the screws as specified in the parts list
Step [4]: Flip down the inner lining.
Step [5]: Close the inner zipper of the top case I 1).
Step [6]: Turn the locking button of the anti-theft device [8) to the closed position.
Step [7]: Attach the anti-theft device [8) inside the top case [1). Tighten the screws as specified in the parts list.
MOUNTING TO THE STREET-RACK
Step [8]: Turn the locking button into the open position.
Step [9]: Push the locking lever into the open position.
Step [10]: Slide the locking system [4) with the two hooks into the openings of your STREET-RACK [sold separately).
Step [11]: Press the top case [1) slightly down …
Step [12]: … and close the locking lever. Pay attention to the audible snap sound.
Step [13] : Secure the top case via locking button of the anti-theft device [8) against theft and check the proper fit on the vehicle.
TIP: We recommend leaving the locking button of the anti-theft device [8) in the closed position during the ride.

URBAN ABS top case as lashing variation
Step [1]: Open the lid and inner zipper of the top case 111.
Step [2]: Flip up the inner lining.
Step [3]: Attach the foam rubber base 14) under the top case 11]. Tighten the screws as specified in the parts list.
Step [4]: Flip down the inner lining.
Step [5]: Close the inner zipper of the top case I 1 J.

Step [6]: Attach the cover plate (7) inside the top case (11. Tighten the screws as specified in the parts list.
FIXATION TO THE VEHICLE
Step [7]: On both sides entangle TWO loop straps (11 I to appropriate and reliable attachment points in the rear area of the vehicle (e.g. luggage hook etc.I.
Then entangle on both sides TWO loop straps (11 I to appropriate and reliable attachment points of the vehicle (e.g. vehicles frame, footrest mounts etc.).

FUNCTION CHECK (MUST BE OBSERVED)

ATTENTION:
All loop straps must not contact any hot or moving parts of the vehicle. All loop straps should also remain 15 cm away from hot parts of the vehicle and remain clear of the exhaust stream. For this reason compress the suspension fully several times with your vehicle stationary.

Step [8]: Attach the hook buckles of the loop straps [11 I on both sides to the marked loops of the top case [1 I. as shown in the drawing. Tighten all loop straps until the top case [1) is centered and securely fastened to the vehicle.
Step [9]: Secure the overlength of the loop straps [6) with the rubber loops against flapping.
Step [10]: Check the proper fit of the top case.

LOADING
ATTENTION:
Never store pointy or sharp-edged objects, which could cause injury to persons or damage to the vehicle/top case.Volume expansion: Open the revolving zipper. For a tight fit the opening angle can be adjusted via the attached straps.

CARE
For cleaning use ONLY a soft textile brush, cloth or sponge and warm soapy water! Rinse with clean water. Do NOT use strong cleaning agents, rough cleaning tools or high pressure washer! Clean the top case after riding in salty conditions, to avoid damage from salt.

SECURITY
Lock the closed zipper with the included lock [3].

ATTENTION:
Surface materials can experience color changes or fading when exposed to direct sunlight for extended periods of time and by environmental factors [e.g., SMOG, acid rain, etc.)! SW-MOTECH assumes no liability for this!

CARE
For cleaning use ONLY a soft textile brush, cloth or sponge and warm soapy water! Rinse with clean water. Do NOT use strong cleaning agents, rough cleaning tools or high-pressure washer! Clean the top case after riding in salty conditions, to avoid damage from salt.

References

• Modesto Technologies

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>