SHEN ZHEN C300 Projector User Manual

C300 Projector

“`html

Specifications:

• Power Supply: DC 20V/3A
• Interfaces: HDMI, USB, Earphone Jack, Type-C
• Remote Control: Bluetooth
• Operating System: Android TV

Product Usage Instructions:

Power Supply:

Plug the power adapter into the back of the projector and the
wall socket. Ensure power output matches adapter requirements.
Avoid simultaneous power supply through different interfaces.

Basic Functions:

1. Power on the unit and switch to standby mode.

2. To switch on, press the button once; LED light turns
   green.

3. To switch off into standby mode, press the button.

Volume Control:

Use Volume Up/Down buttons on the remote to adjust volume.

Multi-Media Connection:

• Select signal source using remote control.
• Connect via USB for Media Player source.
• Type-C interface supports mobile power supply.

User Interface:

Access Android TV for apps and services. Use F+/F- on remote for
focus adjustment.

Network Settings:

In settings, navigate to Wi-Fi settings to connect to the
desired network. Use Cast option for screen mirroring.

FAQ:

How do I pair the Bluetooth remote control?

To pair, press and hold LEFT and RIGHT buttons until indicator
light flashes rapidly. Release to complete pairing.

Can I charge the projector using a Type-C interface?

Yes, you can use a Type-C 20V/3A charger or charging treasure
for power supply. Avoid simultaneous power supply through different
interfaces.

“`

User Manual Projector

Location of Controls Top View

Rear View

1. Power ON/OFF 2. Long press to return function
Short press for confirmation function 3.The media screen has a
volume+/- function 4. Infrared receiver head

5. HDMI 6. USB 7. Earphonejack 8. Type-C( Power Bank
Input Port) 9. DC

10.Infrared receiver head

Remote Control

Bluetooth Remote Control Pairing
1.Press and hold the LEFT and RlGHT buttons on the Bluetooth remote control. Release when the indicator light flashes. 3. Once it flashes rapidly a few times and goes out,pairing is complete.

• You can also pair later in the system settings.

Power Supply 1. This product can be plugged into the power port on the back of the projector using a DC 20V/3A power adapter, and the other end into a wall socket. Make sure the power output of the wall outlet matches the power required by the adapter.

2. Type-c interface: supports PD, QC, AFC fast charging protocol chargers/charging treasures with output of 20V/3A or more, and powers the projector (Note: It is recommended that the power interface and the type-c interface do not supply power to the projector at the same time! )

3. The Type-c interface of this product supports mobile power supply 20V/3A and can be used outdoors. If the user does not have a DC 20V/3A adapter, as long as it is a mobile phone power adapter that supports the fast charging protocol supported in point 2 above, choose a matching one The Type-c data cable is connected to the Type-c interface of the projector, and it can be used normally. (Note: If you use A port to TYPE-C data cable or C port to TYPE-C data cable, you need the corresponding power interface.)

NoteIf not using the unit for a longer period of time, unplug the adaptor from the wall outlet and from the unit.

Basic Functions 1. Power the unit as described above. 2. The unit is now in standby mode.

3. To switch the unit on, press the button once. The LED light will turn to Green. The unit will switch on to the mode last selected.

4. To switch the unit off into standby mode, press button .

Volume Control To increase the volume, press the Volume Up

button.

To decrease the volume, press the Volume Down button.

Multi media connection

1.Press the remote control signal source button to select different signal source inputs; Press the OK button to confirm the use of the selected signal source. Choose different input sources to play different multimedia.
2. Connection to multi media via the USB, then choose the signal source Media Player.
3. You can use Type-C 20V/3A for mobile power supply.

/SOURCE button to select different signal source inputs; Press

the OK key to confirm the use of the selected signal source.

User Interface After the projector is turned on, the following main interface will appear after the 15-20s startup screen flashes.
Android TV operating system Our Smart Projector comes with the Android TV operating system, which means you can easily access a wide range of apps and services including YouTube, Netflix, Disney+ and more. You can also download new apps and update existing ones directly from the Google Play Store.

Focus adjustment The machine adjusts the size and sharpness of the projected image while adjusting the distance. Press the remote control F+/F – to adjust, as shown in the following figure.
Network Settings At the main page,select settings,network settings WIFl settings,press OK enter WIFl settings. Select the WIFl you want to connect,press OK enter settings,the password entry box will pop up,enter password to connect,and press the return key can exit the WLAN interface.

Cast
After connecting to the WiFi network, you can select “Cast” in the option settings to achieve phone screen mirroring, computer screen mirroring, and video application screen mirroring. Miracast
Open the “Wireless Display”of the Android device and select the corresponding projector device name.(Note:Different Android devices have different “Wireless Display”function names and opening methods,please refer to the Android device’s manual for details)Note:The last four digits of the device name are randomly changed. IOS mobile phones need to be connected to the same WiFi router as the projector in the Cast app to achieve the same screen function.

System settings
When users operate settings, they can select network settings, projection settings, screen settings, sound settings, Bluetooth settings, general settings, upgrade management, and local information from the options. Follow the on-screen instructions to set up the Android TV operating system. Download and install the required apps from the Google Play Store. Connect to the internet using Wi-Fi or Ethernet. Enjoy your favorite shows, movies, and more with crystal clear picture quality!

Instructions for using microphone functions

The projector is turned on, turn on the microphone and wait for 3-5 seconds to automatically connect to the projector. 1. Power button, long press: switch on/off Short press: Reverb volume, accompaniment volume, microphone adjustment switch Double click: accompaniment music pause/play switch (audio input mode is play/mute switch) 2. M key, short press: Magic sound switch (original sound, female to male, male to female, baby sound, Warcraft sound); Double click: mute on/off; Long press: Turn the microphone on/off. 3.+key, short press: add reverb, add accompaniment volume, adjust microphone volume, and there will be corresponding voice prompts when adjusted to maximum; Long press: Turn on and off the ambient light. 4.-Key, short press: Reverb reduction, accompaniment volume reduction, microphone volume reduction adjustment, corresponding voice prompt when adjusted to maximum. 5. Indicator light: When not connected to the host after turning on, the blue light flashes slowly. When connected to the host after turning on, the blue light remains on; When the battery is low, the blue light flashes quickly; When charging: The red light is always on. 6. Type-c charging interface.
Kind reminder: 1.When the microphone cannot be connected due to operational errors, press and hold the microphone on/off button for 8-10 seconds to reset. 2.Please use an adapter with a standard output of DC5V/1A or higher to charge the microphone.

Technical Features

Imaging Technology TFT LCD

Contrast

1500:1

Native Resoultion 1280720 Supported Resolution 19201080 pixels

Light LED Lifetime Focus Mode

LED 30,000 hours semi-automatic focusing

Projection Disctance 0.8- 3.2M

Projection Size

30-120 inches

Projector Ratio

1.2:1

Aspect Ratio

16:9

Power Supply Type-c interface

Adapter: 20V-3A
Support output 20V/3A or more PD, QC, AFC quick charging protocol charger/charging treasure.

Consumption

40-50W

System support

Android TV

Unit Size

230105225MM

(This parameter can be used for reference by users,

and our company reserves the right to adjust and update this value.)

Android TV

Information to User
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
Important: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

FCC Caut i on: Thi s devi ce compl i es wi t h par t 15 of t he FCC Rul es. Oper at i on i s subj ect t o t he f ol l owi ng t wo condi t i ons: ( 1) t hi s devi ce may not cause har mf ul i nt er f er ence, and ( 2) t hi s devi ce must accept any i nt er f er ence r ecei ved, i ncl udi ng i nt er f er ence t hat may cause undesi r ed oper at i on. Any changes or modi f i cat i ons not expr essl y appr oved by t he par t y r esponsi bl e f or compl i ance coul d voi d t he user ‘ s aut hor i t y t o oper at e t he equi pment . NOTE: Thi s equi pment has been t est ed and f ound t o compl y wi t h t he l i mi t s f or a Cl ass B di gi t al devi ce, pur suant t o Par t 15 of t he FCC Rul es. These l i mi t s ar e desi gned t o pr ovi de r easonabl e pr ot ect i on agai nst har mf ul i nt er f er ence i n a r esi dent i al i nst al l at i on. Thi s equi pment gener at es, uses and can r adi at e r adi o f r equency ener gy and, i f not i nst al l ed and used i n accor dance wi t h t he i nst r uct i ons, may cause har mf ul i nt er f er ence t o r adi o communi cat i ons. However , t her e i s no guar ant ee t hat i nt er f er ence wi l l not occur i n a par t i cul ar i nst al l at i on. I f t hi s equi pment does cause har mf ul i nt er f er ence t o r adi o or t el evi si on r ecept i on, whi ch can be det er mi ned by t ur ni ng t he equi pment of f and on, t he user i s encour aged t o t r y t o cor r ect
t he i nt er f er ence by one or mor e of t he f ol l owi ng measur es: – – Reor i ent or r el ocat e t he r ecei vi ng ant enna. – – I ncr ease t he separ at i on bet ween t he equi pment and r ecei ver . – – Connect t he equi pment i nt o an out l et on a ci r cui t di f f er ent f r om t hat t o whi ch t he r ecei ver i s connect ed. – – Consul t t he deal er or an exper i enced r adi o/ TV t echni ci an f or hel p. To mai nt ai n compl i ance wi t h FCC s RF Exposur e gui del i nes, Thi s equi pment shoul d be i nst al l ed and oper at ed wi t h mi ni mum di st ance bet ween 20cm t he r adi at or your body: Use onl y t he suppl i ed ant enna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>