SHEN ZHEN SHI KANG XIN TAI ZHINENG KE JI YOU XIAN GONG SI KX7001 2.4G Wireless Video Door Phone User Manual

SHEN ZHEN SHI KANG XIN TAI ZHINENG KE JI YOU XIAN GONG SI KX7001 2.4G

Wireless Video Door Phone

Product Information

• Specifications
  • Model: 2.4G Wireless Video Door Phone
  • Technology: FHSS
  • Resolution: 1080P
  • Frequency: 2.4GHz
  • Camera: 2 Mega-pixel
  • Features: Night Vision, Talk, Unlock, Monitor, Video Recording, Photo Capture

Product Usage Instructions

• Installation and Setup
  • Outdoor Doorbell Installation
  • Install the outdoor doorbell at a height of 1.4-1.7 meters from the ground.
  • Use double-sided tape or screws to fix it on the wall, wooden board, or door.
  • Ensure it is protected from direct sunlight and rain.
• Indoor Monitor Setup
  • Place the indoor monitor in a location with a stable signal.
  • It can be hung on the wall, or wall cabinet, or placed on a desk.
  • Connect the indoor monitor to power using the provided DC cable or optional battery.
• System Operation
  • When a visitor presses the doorbell, real-time video will appear on the indoor monitor.
  • You can manually take pictures or record video on the indoor monitor.
  • Video and photos are automatically saved to the TF card when a visitor calls or when the ‘Unlock’ button is pressed.
• Pairing and Controls
  • To pair the remote control with the unlock control:
  • Press the pair button on the unlock control, then press the unlock button on the remote control.
  • Repeat the process to complete the pairing successfully.

FAQs

• Q: How long does the outdoor doorbell battery last?
  • A: The outdoor doorbell with a 3200mAH battery can work for up to two months if not monitored continuously.
• Q: What is the wireless range between the doorbell and the indoor monitor?
  • A: The wireless range between the doorbell and the indoor monitor is 15 meters.

FEATURE

Packing list

Outdoor doorbell

Indoor monitor

Product Introduction

• It can be used in offices, villas, apartments, etc.
• No need network, and no delay, the doorbell is fixed on the wall, wooden door or glass door, the indoor monitor can be used freely in the place with a stable signal, the indoor monitor can be hung on the wall, wall cabinet, etc., can also be placed on the desk, dining table， coffee table and so on.
• The unlocking control is simple to connect with the electric lock or magnetic lock.
• All of the above are wireless connections and simple installation.

System Specification

• When the visitor presses the doorbell, the real-time video appears on the indoor monitor, the indoor monitor can take a picture or record manually, and automatically take video or take two photos to the TF card when the visitor calls or the user presses the ‘ Unlock’ button.
• Please refer to “Pairing doorbell” and “Pairing unlock control” on page 8.

Pair remote control with unlock control

1. Press the “pair” button of the unlock control, the pair light will flash one time, then press the “unlock” button of the remote control, the pair light will flash continuously.
2. Then press the “pair” button of the unlock control again, and the pair light stops flashing, then press the “unlock” button of the remote control again, and the pair light will flash several times. The pairing is successful.

Outdoor doorbell

Installation Diagram

Doorbell Installation diagram

The outdoor doorbell stands by 0.3mA. If you do not monitor for a long time, the outdoor doorbell with a 3200mAH battery can work for two months, the power input of the doorbell is AC 8~24V, DC 12~36V.

• The doorbell is installed at a height of 1.4~1.7 meters from the ground, Try to avoid sun and rain, can be fixed on the wall, wooden board, or door.

Add Wedge Kit or Corner Kit

• Use the Corner Kit to angle your Doorbell towards your walkway, so you get a better view of visitors coming to your door.

Battery powered

• Tape fixed
  • Use double-sided tape to cut the picture to the appropriate size, then tape it on a smooth surface, such as a glass door, a wooden door or a flush wall.
• Screw fixed

1. Remove the bottom screw
2. Drill two holes and fasten them with screws.![SHEN-ZHEN-SHI-KANG -XIN-TAI-ZHINENG-KE-JI-YOU-XIAN-GONG-SI-KX7001-2-4G-Wireless-Video-Door-Phone-FIG-1 \(10\)](https://manuals.plus/wp-content/uploads/2024/04/SHEN-ZHEN-SHI-KANG-XIN-TAI-ZHINENG-KE-JI-YOU-XIAN-GONG-SI-KX7001-2-4G-Wireless-Video-Door-Phone-FIG-1-10.png)
3. Install the hanging plate on the doorbell part as shown in the figure, and then push it up and fix it with the bottom screw.

AC8~24v or 12~36V power supply

• If the doorbell can be connected to the power supply at the door, please follow the screw fixing method, drill a hole through the DC cable, and plug the 12V power adapter into the DC cable.

Connect electric lock or magnetic lock

Indoor monitor

• The power consumption of the monitor is high, it is recommended to always connect to the 5V USB charger.

Button function

• Short press this button to see the visitor at the door when standby, and short press again to turn off the screen. Screen off after 20 seconds of no operation. Long press for 3 seconds then monitor the long time, and short press again to exit the monitoring.
• Short press to take a photo, the photo will be saved in the TF card. If the Monitor cannot take photos or videos, please insert the TF card.
• Short press to start recording, and short press again to stop recording.
• Long press then hold to talk, and release the voice to the doorbell.
• Short press to enter the menu, and the sub-menu returns to the last level.
• In the shortcut screen, adjust the volume of the doorbell. In the menu, press one of the two buttons to move the menu cursor.
• In the shortcut screen, adjust the volume of the monitor. In the menu, press one of the two buttons to move the menu cursor.
• Short press this button to unlock, before using, connect the lock and the indoor monitor has been paired with the unlock control.

Menu

1. Visitor log
   • Each folder has a maximum of 1000 records. Press 4V A to select the folder.
   • Press the button to open the selected folder, and press the to delete the folder.

Record files

• Press to select the file; press to turn the page. points to the selected, press < OK> to browse. Press < Hold to talk> to delete the file; There are 4 types of records.

Browse videos or photos

Settings

• The record mode is a photo or video taken by a calling or unlocking. Select < Record Mode> and press < OK> to enter the options, and press after selecting. Formatting the SD card will delete all photos and videos!

1. Record mode
2. Format MicroSD
   • Capacity:
   • Total Capacity: 345678 MB
   • Remaining: MB

Ringtones

• Ringtone
  • Press Vto select the ringtone; the selected ringtone will be displayed in orange and played. After selecting the ringtone, press to save and exit.
• Time setting
• Pairings
  • One doorbell can only be connected to one monitor. The doorbell can be paired with the unlock control. The unlocking control can be paired with the remote control.
  • Pair Doorbell  Paired successfully
    • Select then press the < OK> button of Monitor.
    • Press on the upper right corner of the back of the Doorbell.
  • Unlock the control Press < OK> to pair
    • Connect the 12V power supply to the unlock control.
    • Press the button of the unlock control, the pair light flashes once.
    • Press the button on the monitor, and the pair light of the unlock control will continue to flash.
    • Press the of unlock control again, the light stops flashing.
    • Press the button of the monitor again, the pair light flashes for 3 seconds and goes out, and the pairing is successful.

FCC

FCC WARNING

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>