Shen Zhen Tomstar TS11N Smartwatch User Manual
- June 5, 2024
- Shen Zhen Tomstar
Table of Contents
USER MANUAL
Smart Watch
Downloading the App
Scan the following QR code, download, and install the App.
http://plus.crrepa.com/app-download/dafit
Scan QR Code and Download
Charging and Active
Charging the device to active before the first time using; To charge your device, plug the charging cable into the adapter or USB port on your computer.
Pairing
Long press the ‘time page) on your device, go to the detail page. The MAC address on the detail page could help you identify your device on the scanning list.
Use the Touch Screen
On the Main Page:
Swipe Up/Down to the main menu page.
Swipe right/Back to previous
Smart Watch Features
| Sports
Smart Watch automatically tracks Steps taken, Calories burned,
Distance traveled and displays on the screen. NOTE: Your movement stats
reset to zero at midnight.
---|---
| Sleep
If you keep wearing Smart Watch in your sleep , it can provide the hours
slept and quality of sleep stats on both the screen and the APP.NOTE: Sleep
state reset to zero at 8:00 .pm
| Heart Rate Test
Tap the heart rate icon to start measuring your heart rate.
On the heart rate page, It can show the heart rate measured data of
the last times.
| Training
Tap the training icon on the menu to start a new training measure
recording, there are 8 sport modes to be chosen.
The last training recording will be shown on the training page.
| Blood Pressure Test
Tap the blood pressure icon to start measuring your blood pressure.
On the blood pressure page, It can show the blood pressure measured
data of the last times.
| SpO2 Test
Tap the SpO2 icon to start measuring your SpO2.
On the SpO2 page, It can show the SpO2 measured data of the last times.
| Weather
It could show the weather info of current and tomorrow on the weather page.
Weather info is synced after con- necting with the APP, it will not be updated
after a long disconnected.
| Messages Reminder
The device can sync incoming noti- fications from Twitter, Facebook,
Whatsapp, Instagram etc. Recently 3 messages can be stored.Note: You can
switch of/off the incoming notification in the APP.
| Remote Shutter
After connecting the device can remote contral the camera on your phone.
| Silent Alarms
Set up the alarm on the APP, the device will vibrate to remind on time.
| Other Features
Other features include mute mode, brightness adjustment, factory reset, and
power off.
| Stop Watch
Tap the start button on stopwatch , page to Start timing, and tap the
stop button to stop timing.
| Remind to Move
The device will vibrate to remind you to make a relax after 1 hour
sittiing.Note: You can switch on/off the feature in the APP.
Getting to Know Your Device
-
Using in Wet Conditions
Your device is water-resistant, which means it is rain-proof and splash- proof and can stand up to even the sweatiest workout.
NOTE: Do not swim with your Smart Bracelet. We also don’t recommend showering with your wristband; though the water won’t hurt the device, wearing it 24/7 does not give your skin a chance to breathe. Whenever you get your bracelet wet, dry it thoroughly before putting it back on. -
Using Quick View
With Quick View, you can check the time or the message form your phone on your Smart Bracelet without taping. Just turn your wrist towards you and the time screen will appear for a few seconds.
General Info & Specifications
-
Environmental Conditions
Operating temperature: 14°F to 122°F (-10°C to 50°C)
Non-operating temperature: -4°F to 140°F (-20°C to 60°C) -
Size
Fits a wrist between 5.5 and 7.7 inches in circumference. -
Disposal and Recycling
Please kindly be aware that it is the consumer’s responsibility to properly dispose and recycle Smart Bracelet and accompanying components. Do not dispose of Smart Bracelet with common household waste, the Smart Bracelet unit is considered electronic waste and should be disposed of at your local electronic equipment collection facility.
For more information, please contact your local electronic equipment waste management authority or the retailer where you bought the product.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.