SEENMING HOUSE 5040X3 Indoor Mini Hanging Kitchen Island Pendant Light Fixtures Instruction Manual
- June 17, 2024
- SEENMING HOUSE
Table of Contents
SEENMING HOUSE 5040X3 Indoor Mini Hanging Kitchen Island Pendant Light
Fixtures Instruction Manual
Dear customer,
Thank you for choosing Our Lighting. If you have any concerns or questions
about our products, please do not hesitate to contact us directly. We’ll
provide the best service for you. Hope you enjoy the shopping experience!
Any questions please free to contact us:
Email: [email protected]
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E26 TYPE A CFL 10W, LED 6W bulb types and wattages. Do not exceed recommended wattages
- Wire connection warning:
- Black wire connect to positive
- White wire connect to negative
- Green wire connect to grounding wire
SKU:# 3675/3676/3681/3682D1
(Not included the bulb)
Parts included:
| Part | Description | QTY |
|---|---|---|
| B | Green Screw | 1 |
| D | Mounting Plate | 1 |
| E | Canopy | 1 |
| F | Canopy Nuts | 2 |
| H | Haxtun | 2 |
| I | Power Cord | 2 |
| J | Power Cord | 1 |
| K | Plastic Clip | 1 |
| L | Metal Cap | 1 |
| M | Glass Bottle | 1 |
| N | Lip | 1 |
| O | Socket | 1 |
Hardware enclosed:
| Part | Description | QTY |
|---|---|---|
| A | Wire Connector | 3 |
| C | Mounting Screw | 2 |
| G | Allen Wrench | 1 |
Step 1:
Unscrew the Canopy Nuts(F) from the Mounting Plate(D).
Step 2:
- Place Glass Bottle(M) onto Socket(O) and place Metal Cap(L) on to Glass Bottle(M). Secure Threaded Collar(I) into Lip(N) and secure Haxtun (H) into Threaded Collar(I) with Allen Wrench(G).
Step 3:
Cross Power Cord(J) into the Threaded Collar(I) and Canopy(E), then adjust the
right length of power cord. Use Allen Wrench(G) to secure Haxtun (H).cross
Power Cord(J) into Plastic clip(K) for pulling resistant
**Step 4:
**
- Gently pull existing wire down from the ceiling junction box and allow wires to hang.
- Attach Mounting Plate (D) to the ceiling outlet box.
- Secure the Mounting Plate (D) by tightening 2 mounting escrow (C) with a screwdriver.
Step 5:
Connect the white wire from the fixture to the white wire of the supply
circuit. Connect the black wire from the fixture to the black wire of the
supply circuit.
Step 6:
Place the canopy (A) against the mounting surface, secure the Canopy Nut(F).
Step 7:
Install bulbs(not included) into the Socket(O).