Shen Zhen Gtl Technology CW370 3-In-1 Charging Station Instruction Manual
- June 5, 2024
- Shen Zhen Gtl Technology
Table of Contents
CW370
Instruction Manual
3 in 1 Charging Station
Introduction:
- Charging of iPhone.
- Charging of AirPods/AirPods pro.
- Wireless charging area of iWatch.
- Operating indicator light.
- TYPE-C Female.
Operation instructions:
iPhone charging: Plug the mobile phone upright to the position of the iPhone head to charge, and see that the “charging sign” lights up on the screen of the mobile phone, indicating that it is charging normally (Note: The toggle arc of the iPhone head is limited, and the force is moderate when toggled to prevent damage to the mobile phone or mobile phone charging head)
2.2 Bluetooth headset charging: Plug the Bluetooth headset into the iPhone head of the headset to charge (Note: the charging iPhone head of the headset is fixed and cannot be pulled hard to prevent damage to the headset or the charging iPhone head)
2.3 iWatch charging: Put the iWatch
on the wireless charging area of the watch, align the magnetic attraction, and
the watch will light up the “charging sign”, indicating that it is charging
normally.
2.4 This product needs to be powered by an adapter with a power1OW and is
connected to the Type-C port for power supply. When the power indicator blue
light is on, it means the power supply is normal.
2.5 Power indicator: The blue indicator is always on when the product is
powered on.
Specifications:
Name | 3 in 1 charging station | Model | CW370 |
---|---|---|---|
Product Size | 106×72 x 128 (mm) | Porter supply | Type-C |
Input | 5V 2A | Maximum output power | 10W |
Matters needing attention:
4.1 When charging, it is best to use the original 5V/2A adapter to prevent the
charging speed from being affected.
4.2 Do not put metal or foreign objects in the charging area of the iWatch to
prevent the device from not charging.
4.3 When charging, please insert the device and the iPhone plug incorrect
place to prevent the device from not charging.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm between the
radiator and your body: Use only the supplied antenna.