Shen Zhen Simaru Tec TMYKQ004 Zigbee Scene Switch User Manual

Shen Zhen Simaru Tec TMYKQ004 Zigbee Scene Switch User Manual

PRODUCT DESCRIPTION

1. ZigBee wireless switches can only be paired with ZigBee Tuya gateways (the gateway needs to be purchased separately)
2. When configuring the network, please be close to the gateway to quickly connect to the network.
3. When the power is turned off or the gateway is removed, the product needs to consume power because it is always looking for the gateway signal. It is recommended to remove the battery to save energy.
4. This product uses CP2032 battery (battery not included, need to purchase additionally)

PLACEMENT

OPERATION GEASTURE

Note: In the long press gesture mode, the indicator light flashes once to let go, otherwise it is easy to clear the signal.

NETWORK PAIRING AND DEVICE PAIRING

1. Make sure your mobile WiFi is turned on.

2. Open your Tuya APP, Connect to the ZigBee gateway, and make sure that the connection is 2.4GHz.
   Click on the top right corner

Choose wired gateway or wireless gateway according to your own gateway.

3. Add the ZigBee wireless switch as a sub-device in the ZigBee gateway.
4. Long press any key.
5. The indicator Iightstarts to flash.

4. Add a ZigBee or WiFi device to the ZigBee wireless switch. and it can be controlled remotely after successful pairing. Each key can be set independently.There are 4 buttons.

1. Launch Tap to Pun  

Note One-key switch inversion, only supports on and off functions, and does not support other functions.

2. Device  

THE BOX CONTANTS

1.  1 ×ZigBee Wireless switch
2. 1 × Stand
3. 1×Manual
4. 2xScrew
5. 1× Box

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• RF warning for Portable device:The device has been evaluated to meet general  RFexposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>