ShenZhen Hidin Technology TI01 Smart Remote Controller User Guide
- June 5, 2024
- Shen Zhen Hidin Technology
Table of Contents
ShenZhen Hidin Technology TI01 Smart Remote Controller
Product Description
The intelligent universal remote control is integrated in a large number of infrared code libraries, which can be used to add various infrared remote controls through this device. To realize intelligent application scenarios
Preparation for use
Make sure both the mobile phone and the smart remote controller keep the same
Wi-Finetwork to ensure the efective connection between the mobile phone
and the smart remote controller
Install the “Smart Life”APP
Step A: Find out “Smart Life”app in Apple app store, Google Play, or scan
the QR code bellow and install it. 
The free app” Smart Life” is compatible with mobile devices the support IOS8.0 above, Android 4.4 above
Step B: Enter the register interface, input the email address/phone number for getting the verification code to register an account. Please just login if you already have a Smart Life account.
Access settings
Connect the smart remote contro ller to the power supply, and connect to the
family 2.4GHz band router through the network cable;
Confirm that the network indicator (green light) is always on (if the
indicator is in other states, long press the “reset button” until the green
light is on)
Make sure that the mobile phone is connected to the home 2.4GHz band router.
At this time, the mobile phone and the remote controller are in the same LAN
Open the “My Home” page of the “smart life “app and click the add button “+”
in the upper right corner of the page; Click “Gateway and other” on the left
side of the page, and select the “universal remote controller” according to
the icon;
Follow the prompts to operate the device to connect to the network, after adding it, you can find the device in the “My Home” list
Product specification
| Product name | Smart Remote Controller |
|---|---|
| Model | TI01 |
| Input | 5V 1A |
| Operation temperature | -10 C~55 C |
| Working humidity | 10%-90%RH(No condensation) |
| Product Size | ¢ 90X20mm |
| Wireless connection | Wi-Fi |
Packing list
- Smart Remote Controller X 1
- Data cable X 1
- User Manual X 1
- Screw X 3
- Screw plug X 3
- Fixed bracket X 1
FCC NOTE：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation .
The manufacturer is not responsible for any radio or tv interference caused by
unauthorized modifications or change to this equipment.
Such modifications or change could void the user’s authority to operate the
equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
To maintain compliance with FCC’s RF exposure guidelines, this equipment
should be installed and operated with a minimum distance of 20cm between the
radiator and your body