Shen Zhen Gtl Technology CW210 2-In-1 Charging Station Instruction Manual
- June 5, 2024
- Shen Zhen Gtl Technology
Table of Contents
CW210
2-In-1 Charging Station
Instruction Manual
Introduction:
- Charging of airpods/airpods pro
- Wireless charging area of iWatch
- TYPE-C Female
Operation instructions:
2 .1 Bluetooth headset charging When charging the Bluetooth headset, first turn the apple head of the Bluetooth headset to stand upright. then plug the Bluetooth headset into the position of the apple head of the headset to charge and see that the charging indicator of the Bluetooth headset lights up, indicating normal charging.
2.2 iWatch charging method: (1) The iWatch wireless charging pad is placed flat to charge the iWatch. (2) Put the iWatch wireless charging pad to the vertical position to charge the Match.
2.3 iWatch charging: Put the ‘Watch on the wireless charging area of the watch
align the magnetic attraction, and the watch will light up the “charging sign”
indicating that it is charging normally.
2.4 This product needs to be powered by an adapter with a power 5V/1A–2A, and is connected to the Type-C port for the power supply
Specifications:
Name | 2 in 1 Charging Station | Model | CW210 |
---|---|---|---|
Product Size | 93x93x12 I mm ) | Power supply Port | Type-C |
Input | 5V/1A- -2A | Maximum output power | 10W (MAX) |
Matters needing attention:
4.1 When charging. please insert the device and the iPhone plug-in correct
place to prevent the device from not charging
4.2 Do not put metal or foreign objects in the charging area of the Watch to
prevent the device from not charging.
4.3 This product only compatible with ‘Watch and Airpods
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm between the
radiator and your body: Use only the supplied antenna.