Shen Zhen Shi Jin Jiu Yuan Ke Ji You Xian Gong Si AS12 Wireless Lavalier Microphone User Manual
- June 3, 2024
- Shen Zhen Shi Jin Jiu Yuan Ke Ji You Xian Gong Si
Table of Contents
Shen Zhen Shi Jin Jiu Yuan Ke Ji You Xian Gong Si AS12 Wireless Lavalier
Microphone User Manual
Instruction
Nicama AS12 lavalier microphone is a wireless microphone whose frequency is2.4GHz, which is used on smartphones. Nicama AS12 includes transmitters and receivers. It isdesigned for reliable and trouble-free performance, used in online live broadcast , videoVlog shooting and so on.
Package contents
- Transmitter
- Receiver
- Foam windscreen
- Windscreem Muff
- User guide
- Type-c cable
Features
Flat frequency response for perfect sound output, retains original voice quality, without making voice sound robotic and mechanical. Omni-directional condenser microphone. High-quality mic is ideal for video.
- Mic
- Transmitter Charging port
- Transmitter indicator Blue Light : normal model. When you turn on the transmitter, the indicator is blue. Red Light : noise reduction mode. When the indicator is blue, click the switch key, theindicator will change to be red. Blue and red light : reverb mode When the indicator is red, click the switch key, theindicator will change to be blue and red. When the indicator flashes off and on, it indicates the transmitter does not connect withthereceiver. The transmitter will be turned off by itself if the transmitter does not connect withthe receiver in 3 minutes When the indicator keeps lighting, it indicates the transmitter and the receiver areconnected with each other. If the transmitter has connected with the receiver, theindicatorflashes a red light, it indicates the power of the battery is below 10%, the transmitter needbe charged. The indicator keeps red while the transmitter is charging. When the transmitter isfull of power, the red light will be off. 4 switch key Press it more than 3 seconds to turn on or off the transmitter. There are 3 modes of the transmitter: a normal mode, a noise reduction modeandareverb mode . Click
- to switch the model.
- phone Charging port
- port to connect phone
- receiver indicator When you plug the receiver into smartphones, it takes 3 seconds to flash bluelight. When the indicator keeps lighting, it indicates the transmitter and the receiver areconnected with each other.
Specifications
Transducer: Electret Condenser
Polar Pattern: Omni-directional
Frequency Range: 65Hz – 18kHz
Signal/Noise: 74 dB SPL
Sensitivity: -30dB+/-3dB/0dB=1V/Pa,1kHz
Frequency response & Polar curve
Manufacturer: Nicama International Co.,LTD
ADD:Room 205, Building 6, Gong Ming Yan Chuang Gu Fu HuaYuan, Shang Cun
Community, Gongming Street,Guang Ming District, ShenZhen,Guangdong, China
Tel:86-0755-23196091
Email:Support@nicama.biz
Website: www.nicama.biz
This device complies with part 15 of the FCC Rules. Operation is subject to
the followingtwoconditions: (1) this device may not cause harmful
interference, and (2) this device must accept anyinterference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for
compliancecould void the user’s authorityto operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These
limits are designed toprovide reasonableprotection against harmful
interference in a residential installation. This equipment generates, usesand
can radiate radio frequency energy and, if not installed and used in
accordance withtheinstructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If thisequipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user isencouraged totrytocorrect the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The devicecanbeused in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>