HYUNDAI HY-H08 True Wireless Earphones User Manual
- September 5, 2024
- HYUNDAI
Table of Contents
HYUNDAI HY-H08 True Wireless Earphones
Usage Instruction
- Don’t attempt to disassemble the unit and change any part, except if there is an operation method mentioned in the manual.
- Don’t expose the unit to liquid, moisture, or humidity, since it is not a waterproof product.
- Disconnect the unit with your BT device and move it to the safe area if the liquid gets inside the unit.
- Don’t assemble or disassemble the unit to avoid electric shock, if there is water on your hands.
- Don’t expose the unit to extremely high temperatures or dispose of the unit in the fire as it will result in an explosion.
- Don’t place the unit in an electromagnetic interference environment to avoid malfunction.
Packing list
Product schematic description
Product specification
- Bluetooth version: V5.4
- Transmission distance: 10M
- Battery capacity: 200mAh
- Duration of use: approximately 4 hours (headphones)
- Charging time: approximately 1.5 hours (headphones)
- Rated input: 5V —250mA
(All technical information is subject to actual performance)
Connect the charging case to the 5V power adapter using a Type-C charging
cable.
( Reminder : Close the charging case. If the blue light on the charging
case flashes, please charge the charging case promptly.)
LED indicator light status
- Earphone indicator light
- Power on: Blue light stays on for 1 second, red and blue lights flash alternately
- Shutdown : The red light will turn on for 1 second and then turn off
- The pairing of left and right earphones : alternating flashing of red and blue lights
- Pairing successful: Blue light 65 lights up once
- Low battery: Red light flashing slowly
- Charging : The red light stays on for a long time
- Fully charged: The blue light is constantly on
Product operating instructions
-
Power on headphones.
Method 1: Press and hold the power button for 2 seconds to turn on the -
Power off headphones.
Method 1: Press and hold the power button for 3 seconds to turn off the -
Pairing to the BT device
-
Step 1: Press and hold the power button for 2 seconds, and the earphones will automatically pair when turned on.
-
Step 2: Open the Bluetooth list of the smart device, search for “HY-H08” and connect.
Operation of touch buttons
Music playback
headset operation
Phone Hands-Free
Headphone operation (in incoming call state)
Restore factory settings
Long press and hold the plus or minus function keys for 2 seconds to clear
pairing information when not paired with the phone after booting up.
Name and content of hazardous substances in products
Warranty Service
Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!
Authorized by Modern Integrated Commercial Holdings Co., Ltd
- Authorized party: Shenzhen Modern Digital Electronics Co., Ltd
- Address : 601A, Chentian R&D Building, No. 50 Baotian Road, Xixiang Street, Bao’an District, Shenzhen
- Manufacturer : Modern Innovation (Shenzhen) Technology Development Co., Ltd
- Address : 1909, Block A, Rongchuang Zhihui Building, Intersection of Longsheng Road and Jinglong Jianshe Road, Shangfen Community, Minzhi Street, Longhua District, Shenzhen
GENUINE PRODUCT OF HYUNDAI CORPORATION HYUNDAI
- Certificate of Approval
- Product No:-
- Production Time: PASS
- QC: –
FCC Statement
According to Part 15 of the FCC Rules, this device has been tested to meet the
restrictions for Class B digital devices. These restraining decrees Provide
reasonable protection against harmful disturbances in residential facilities.
The device generates and uses radiofrequency energy,lf this instruction is not
installed and used by the regulations, it may cause harmful interference to
radio communications. However, there are There is no guarantee that
interference will not occur in a particular installation. If this device is
built for radio or television reception Into harmful interference, the device
can be determined by turning it off and on when the user is encouraged to try
to pass through one or Several more measures below
- Redirect or reposition the receiving antenna.
- Increase the distance between device and the receiver.
- Sockets connected to devices on circuits different from the receiver are connected.
- Please consult a dealer or experienced radio/TV technician for assistance.
This device complies with Part 15 of the FCC Rules. The operation is restricted by the following two conditions
- The device shall not cause harmful interference.
- The device must accept any received interference, including interference that may cause unexpected operation.
Changes or modifications that are not explicitly approved by the compliance responsible party may invalidate the user’s permission to operate the device. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.