GABOR FPS-DC Floor Stand Tv Mount User Manual
- September 5, 2024
- GABOR
Table of Contents
- FPS-DC Floor Stand Tv Mount
- Product Specifications
- Product Usage Instructions
- Assembling the Stand
- Attaching the Display Mount
- Attaching the Display Brackets
- Hanging the Display on the Mount
- Adjusting the Monitor Tilt
- Cable Management
- Tool Storage
- Q: What should I do if the included screws do not fit my
- Q: Can I hang my TV on this mount by myself?
- Q: How do I adjust the tilt of my monitor once it’s
- Q: What is covered under the product warranty?
FPS-DC Floor Stand Tv Mount
“`html
Product Specifications
-
Compatible Flat-Panel Display Size: 32 to 85 in. (81.3 to 215.9
cm) -
Height: 63.4 in. (161 cm)
-
Max Weight Capacity: 110 lb. (49.9 kg)
-
Weight: 33.7 lb. (15.3 kg)
-
Material: Wood, steel, plastic
Product Usage Instructions
Assembling the Stand
Step 1: Attach components A, B, G, I, L as shown in the
diagram.
Step 2: Attach components F, D, K to assemble the stand
structure.
Attaching the Display Mount
1. Remove the rail protectors.
2. Attach the mount to the stand structure.
Attaching the Display Brackets
1. Loosen the security screws.
2. Attach the brackets to the back of your TV with the arrow
facing upwards.
Hanging the Display on the Mount
It is recommended to have two people for this step. Hang the TV
securely on the mount and tighten the security screws.
Adjusting the Monitor Tilt
Use component K to adjust the tilt of the display as
desired.
Cable Management
Organize and manage cables using the provided cable management
features.
Tool Storage
Store any extra tools or components in the designated storage
areas on the stand.
Frequently Asked Questions (FAQ)
Q: What should I do if the included screws do not fit my
display?
A: Use the variety of screws included for different VESA
standards and ensure you choose the appropriate size to avoid
damaging your display.
Q: Can I hang my TV on this mount by myself?
A: While it is possible, it is highly recommended to have a
second person assist you for safety reasons when hanging the TV on
the mount.
Q: How do I adjust the tilt of my monitor once it’s
mounted?
A: Use component K to adjust the tilt of your display to your
preferred angle.
Q: What is covered under the product warranty?
A: The warranty covers manufacturing defects but does not cover
damage caused by misuse, neglect, or improper installation. Contact
Customer Service for warranty claims.
“`
FPS-DC /
FLOOR STAND TV MOUNT
WITH WOOD ACCENT
for 32-85 in. Displays
User Manual
Thank you for choosing Gabor.
The Gabor FPS-DC floor-standing TV mount offers a stylish design for any home
or office. A wood accent and chromed metal finish elevate the stand and your
display. The stand accommodates flat and curved panels with screen sizes from
32 to 85 inches and weights up to 110 pounds, with the ability to tilt the
screen +5° or -10° for the optimal viewing angle. A large base provides an
excellent counterbalance, and the wood panel hides your cables to provide a
clean aesthetic in any room.
2
Safety Warnings
· When installing this product, be sure to refer to the mounting instructions
detailed in this manual; failure to follow the mounting instructions may void
the product warranty.
· It is strongly recommended that this product be installed by a qualified
professional or installation contractor; Gabor takes no responsibility for any
product damage or personal injury resulting from mishandling, incorrect
mounting, faulty assembly, or improper use of this product.
· Do not use this product for any flat-panel screen device other than what it
is intended for; the exact specifications, size parameters, and weight limits
are found both on the product box and in the instruction manual.
· This product may contain small parts which can pose a choking hazard; keep
out of reach of children and pets.
· Excessive exposure to liquids may damage the finish of this product; when
cleaning this product, use only a mild detergent solution and quickly wipe dry
with a soft cloth.
· If you have safety concerns about installing this product, contact a
qualified professional or installation contractor.
· If this product is missing hardware or there are defective parts, visit
www.madebygabor.com or call Customer Service at
212-594-2353.
· It is recommended that at least two people perform the installation process to prevent injury from mishandling or dropping the product or flat-panel display; proper safety gear and tools must be used at all times when installing this product.
· All images are for illustrative purposes only.
· Do not assemble or use the cart on structures that may be affected by vibrations or noticeable impacts; do not assemble or use near a heater, fireplace, or any other source of direct heat energy.
3
Product Specifications
Compatible Flat-Panel Display Size: 32 to 85 in. (81.3 to 215.9 cm)
Height: 63.4 in. (161 cm)
Max Weight Capacity 110 lb. (49.9 kg)
Weight: 33.7 lb. (15.3 kg)
Tilt: -10°/+5°
Material: Wood, steel, plastic
Base Dimensions: 34.1 × 20.3 × 2.2 in. (86.5 × 51.5 × 5.7 cm)
VESA Mounting Patterns 100 × 100 mm 150 × 100 mm 150 × 150 mm 200 × 100 mm 200 × 200 mm 300 × 200 mm 300 × 300 mm 400 × 200 mm 400 × 300 mm 400 × 400 mm 600 × 400 mm
4
57mm
680mm 100-620mm
180mm
+5° -10°
170mm 100-402mm
425mm
865mm
515mm
Overview
A B
C D
1X E 2X F 4X G 4X
m6×10
m8×25
1X H
4X I 12X J
4X
m8×65
D8
M8
1X K
1X L
1X M 1X
4 mm
2X
5 mm
13-14 mm
Required Tools
Phillips screwdriver
Mounting Hardware
M-A 4X M-B 4X
m6×14
M-C 4X
m8×16
M-D 4X
m6×30
m8×35
M-E 4X M-F 4X M-G 4X
D8
O15×O8×5
O15×O8×15
5
Assembling the Stand
A
1X
Step 1
A
B 6
G I
L
B
D
FG I
K
L
1X
2X
4X 4X 4X 1X
1X
Step 2
F D
K
Attaching the Display Mount C 1X
Remove the rail protectors.
C
M
Attach the mount.
J I
H
Position A
Position B
H
IJ
L
M
4X
8X 4X
1X
1X
Replace the rail protectors.
7
Attaching the Display Brackets
Loosen the security screws.
E
E
M-A M-B M-C
M-D M-E M-F M-G
2X
4X 4X
4X
4X
4X 4X
4X
Attach the brackets to the display.
Make sure the arrow on the bracket is facing up toward the top or your TV.
8
A variety of screws are included for different VESA standards on the backs of most displays.
Select the appropriate-size screws and washers.
M-C/M-D M-C/M-D M-A/M-B
Warning
If the screw is too short, it may not hold the display.
If it’s too long, it may damage the display.
Too Short
Hand-thread the screws to determine the correct diameter.
M-E
Too
M-F
Long
M-G
Hanging the Display on the Mount
It’s highly recommended to perform this step with two people.
Tighten the security screws.
9
Adjusting the Monitor Tilt
K
1X
10
Cable Management
Tool Storage
11
One-Year Limited Warranty
This Gabor product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails during
normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by
the warranty provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Gabor Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Gabor along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.madebygabor.com or call
Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Gabor is a registered trademark of the Gradus Group. © 2024 Gradus Group LLC. All Rights Reserved.
GG3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>