PureAire 99196 8-Channel Programmable Controller for Gas Detectors and Monitors User Manual
- June 10, 2024
- PureAire
Table of Contents
99196 8-Channel Programmable Controller for
Gas Detectors and Monitors
User Manual
99196 8-Channel Programmable Controller for Gas Detectors and Monitors
Re-activate all channels, unused channels will show LO
Press and hold the ESC/MENU button until the above menu appears
The menu will look like this for all Channels: Input 1 Settings = channel 1,
Input 2=channel 2, and so on for the remaining Channels.
The display should look like this for all inputs 1-8 
cont. – the display should look like this for all inputs 1-8
Next: Select Outputs Settings
Output Settings for relay 1 output 1 =relay 1
Scroll down and select Source. This is where to go to de-active any unused channels.
Example of only channel 1 or terminal #35 is being used
If necessary, do same for output 2 or relay 2
Example of only channel 1 or terminal #35 being used
Lastly when the controller first comes on the strobe will sound during the
four minute warm and stop once the threshold is reached…..
1140 Enshell Road
Lake Zurich, Illinois 60047
www.pureairemonitoring.com
847-726-6000
888-788-8050
Documents / Resources
|
PureAire 99196 8-Channel Programmable Controller for Gas Detectors and
Monitors
[pdf] User Manual
99196 8-Channel Programmable Controller for Gas Detectors and Monitors, 99196,
8-Channel Programmable Controller for Gas Detectors and Monitors, 8-Channel
Programmable Controller, Programmable Controller, Controller
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>