GABOR LTS-50 Laptop Rising Flex Stand User Manual
- June 14, 2024
- GABOR
Table of Contents
LTS-50/
LAPTOP RISING FLEX STAND
User Manual
Thank you for choosing Gabor.
Height: 9.5 to 12.7 in. (24.1 to 32.3 cm)
Collapsed Height: 2.2 in. (5.6 cm)
Specifications
Load Capacity: 11 lb. (5 kg)
Compatibility: 10 to 17 in. laptops
Parts List
3/8 in. (10 mm)
Hex wrench
Using the Stand
The LTS-50 is compatible with 10- to 17-inch laptops and tablets.
Angle Adjustment
Full Range of Motion
Recommended Usage
Note:
The images show the stand’s maximum extended angles to safely use your device.
Height Adjustment
Tension Adjustment
Remove the rubber caps to access the tension screws.
Use the included wrench to adjust the tension.
Rotate clockwise to tighten, and counterclockwise to loosen.
One-Year Limited Warranty
This Gabor product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails during
normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by
the warranty provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Gabor Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Gabor along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit
www.madebygabor.com or call Customer Service at
212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Gabor is a registered trademark of the Gradus Group.
© 2023 Gradus Group LLC. All Rights Reserved.
All images are for illustrative purposes only.
GG1