Projection 313X Alarm Clock User Manual

Projection 313X Alarm Clock

Projection Alarm Clock

Thank you for choosing our product. Please read the following information carefully:

1. This product is designed to be used with the original adapter provided in the package.
2. The button battery inside the product is for time backup in case of a power outage.
3. Please follow the instructions to set up the product. We hope you have a nice experience using our product.

Precautions

1. Do not expose the unit to extreme temperatures, direct sunlight, dust, or humidity.
2. A cloth or other protective material should be placed between the clock and the furniture.
3. Cut off the power before cleaning the clock with a soft cloth moistened with mild soap and water.
4. You must use the original adapter.
5. Do not disassemble the clock or touch any components

Before use

Thanks a lot for choosing our product. Please read the following information carefully:

1. This product is designed to be used with the original adaptor provided in the package.
2. The built-in button battery inside the product is only for time backup in case of a power outage.
3. Please follow the instructions to set up the product.
   We hope you have a nice experience using our product.

Precautions

1. Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.
2. A cloth or other protective material should be placed between the clock and the furniture.
3. Cut off the power before cleaning the clock with a soft cloth moistened only with mild soap and water.
4. You must use the original adapter.
5. Do not disassemble the clock or touch any components.

Package Contents

Diagram

1. Time Setting & 12/24H switch
2. Alarm Setting & Turn On/Off Alarm
3. Digit –
4. Snooze & Brightness Adjustment
5. Digit +
6. Projection Button
7. Projection Column (rotatable, forth 90°, backward 90°
8. Projection Lens
9. Speaker
10. Battery Compartment
11. Micro USB Port (Power Supply)
12. USB Charging Port

Specifications

• Input: 5V =1.5A
• Projection angle: -90°-90°
• Screen brightness: 3 level
• USB output: 5V = 1A
• Projection distance: 0.5 – 3m
• Projection brightness: 3level

Power On

Connect the USB cable to the product and adapter, and plug the adapter into a power outlet.

Time Setting

1. Long press to enter to time setting, then short press  to set MINUTES. (Short press / to set the time, and long press / to quickly set the time.)
2. After setting, short press to confirm and back to Time Display.
3. In Time Display Mode, short press to switch to 12/24 hour time format. The “AM” appears on the
   display in the forenoon and the “PM” appears in the afternoon if you choose the 12-hour time format.

Alarm Setting

1. Long press to enter to Alarm Hour setting, and short press again to enter to Alarm Minute setting. (Short press to set alarm time, and long press to quickly set the time.)
2. After setting, short press to confirm and back to display mode.
3. In Time Display Mode, short press to turn off the alarm.

Note If the setting is completed, and no operation for 15 seconds, the setting will be automatically save equipment off and on, the user 1s encouraged to try to correct the interference, and the clock returns to the time display interface.

Snooze Function
When the alarm rings, short press to turn off the alarm briefly, and it will alarm again after 9 minutes.

Turning off the alarm

When the alarm rings, press any button other than to turn off the alarm.

Note: The alarm is only turned off for the day. It goes off again the next day.

Display Brightness Adjustment

In Time Display Mode, short press z to adjust display brightness. Low-Medium- High-OFF

Projection setting

Brightness adjustment

1. Short press to turn on the projection, then short press again to adjust the brightness of the projection. dim-mid-high.
2. When the projection is turned on, long press to flip the projection image 180°.

Note: The most recommended distance for projection is 0.5-3m.

Adjust the projection angle

• Rotate the cylinder to adjust the projection angle. Range: -90°-90°

USB Charging Function

Connect the USB port of this product with a USB cable to charge the mobile phone and other devices.
Note:

1. Please use the original USB cable of the mobile phone and other devices to charge.
2. Please power the product with the original adapter supplied.
3. It may take a longer time to charge your phone by using this USB port.

FCC statement

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

WARRANTY

• 6 Months Return
• 24 Months Warranty
• Lifetime Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>