Clover Countertop Payment Terminal User Guide

: September 9, 2024
: clover

Table of Contents

Countertop Payment Terminal
Specifications
Product Usage Instructions
Printer Roll Installation
PIN Shield Installation (Optional)
Power On
FCC Compliance
- FAQ
Q: Is the Clover Compact suitable for outdoor use?
Q: How should I dispose of the product?

Countertop Payment Terminal

“`html

Specifications

Model Number: C801
Dimensions: 40 mm (1.5 in)
Mounting Option:
- Metric thread: M6 x 1
- Depth: 8mm (5/16 in)

Product Usage Instructions

Printer Roll Installation

Open the printer roll compartment.
Insert the printer roll ensuring it is properly aligned.
Close the compartment securely.

PIN Shield Installation (Optional)

Align the PIN shield with the designated slots.
Secure the PIN shield in place by sliding it into
position.

Power On

Ensure all connections are secure.
Plug the device into a grounded AC power outlet.
Press the power button to turn on the device.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Please refer
to the user manual for detailed FCC compliance information.

FAQ

Q: Is the Clover Compact suitable for outdoor use?

A: No, operations in the 5.15-5.25GHz band are restricted to
indoor usage only as per FCC regulations.

Q: How should I dispose of the product?

A: The product falls under the WEEE Directive and should be
collected and managed separately from household waste. Contact your
local environmental authority or the store of purchase for
recycling options.

“`

Compact
Quick Start Guide clover.com/help

Included
40 mm (1.5 in)

Install printer roll
1 2
3

Optional: Install PIN shield
2 1
Power on
1
Plug in last, to a grounded AC power outlet.
2

LTE

Mounting Option
Metric thread: M6 x 1 Depth: 8mm (5/16 in)

Drilling Template
8 mm (5/16 in)

38 mm (1.5 in)

FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Part 15 Class B-specific
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate the equipment. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
FCC exposure limit compliance statement
This equipment complies with radio frequency (RF) exposure limits adopted by the Federal Communications Commission for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.

Clover Compact
Model Number: C801
Patent
clover.com/patents Clover Network, LLC 415 N Mathilda Ave Sunnyvale, CA 94085, USA
Waste Electrical and Electronic Equipment-WEEE
NOTE: This product is covered electronic equipment under the European Union’s Waste from Electrical and Electronic Equipment (“WEEE”) Directive (2012/19/EU). The WEEE Directive requires that covered equipment be collected and managed separately from typical household waste in all EU member states. Please follow the guidance of your local environmental authority or ask the shop where you purchased the product for collection or recycling options.
v11