e-pill P42 LED Display Smart Water Bottle User Guide

: September 5, 2024
: e-pill

Table of Contents

P42 LED Display Smart Water Bottle
Product Specifications:
Product Usage Instructions:
Charging Instructions:
Setting the Time:
Setting the Alarms (A1, A2, A3):
Silence Alarm:
Delete Alarm Setting:
Power ON/OFF:
Sleep Mode:
Reset All Settings:

P42 LED Display Smart Water Bottle

“`html

Product Specifications:

LED Display
12hr AM/PM format
Battery Status indicator
Three alarms (A1, A2, A3)
Type-C charging wire included
Expected battery life with full charge and 3 alarms set: around
5 days

Product Usage Instructions:

Charging Instructions:

You must charge your bottle prior to setting the time and alarm
times. Use your own charging adapter with the Type-C charging wire
provided.

Setting the Time:

Press and hold “-” button for three seconds to enter time
setting mode; the clock display will flash.
Adjust the hour and minutes using the “-” or “+” buttons.
To save the time setting, press and hold the button for 3
seconds.

Setting the Alarms (A1, A2, A3):

Press and hold the “+” button for three seconds to enter alarm
setting mode.
Cycle between alarms A1-A3 using the “-” or “+” buttons.
Adjust the hour and minutes for each alarm and save the
settings by holding the button for 3 seconds.

Silence Alarm:

To silence the alarm, press the button when it goes off.

Delete Alarm Setting:

To delete an alarm setting, press and hold the “+” and “-”
buttons simultaneously for 5 seconds in alarm setting mode.

Power ON/OFF:

To turn the device ON/OFF, press and hold the button for three
seconds.

Sleep Mode:

If the display is inactive for 20 seconds, it will enter sleep
mode. Tap once to wake up the display.

Reset All Settings:

To clear and reset all settings, press and hold the “+” and “-”
buttons simultaneously for 5 seconds on the current time
display.

FAQ:

Q: How can I clean the device?

A: Do not immerse the bottom in water. Handwash only. The
medicine compartment is removable for separate cleaning.

Q: How do I know when to charge the battery?

A: With a full charge and 3 alarms set, the battery is expected
to last around 5 days. Monitor battery status on the LED
display.

“`

Carefully review and save this setup guide

Display Overview
1. LED Display 2. 12hr AM/PM 3. Battery Status 4. Alarm 1 (A1), Alarm 2 (A2), & Alarm 3
(A3)
5. Decrease Button and Increase Button +
6. Power Button

Charging Instructions
YOU MUST CHARGE YOUR BOTTLE PRIOR TO SETTING THE TIME & ALARM TIMES
With a full charge and 3 alarms set, the battery is expected to last around 5 days.
The bottle includes a Type-C charging wire; please use your own charging adapter.
Alarm Duration Each alarm will sound for 30 minutes unless promptly silenced.

Setting the Time
1. Press and hold – button for three (3)
seconds to enter time setting mode; the clock display will be being to flash. 2. Press the button; the hour will start to flash.
3. Press – or + button to adjust the hour.
4. Press button once; the minutes will begin to flash.
5. Press – or + button to adjust the
minutes. 6. Press the button; the current set
time will begin to flash.

7. Then press and hold for 3 seconds to save the time setting (set time will stop flashing).
NOTE: Press and hold + or – button will
cause the hour or minute digits to move faster.

Setting the Alarms (A1, A2, A3)
1. Press and hold the + button for three
(3) seconds to enter alarm setting mode; cycle between A1- A3 by using
the – or + buttons. Choose the correct
alarm and it will illuminate in green with the time display will start to flash. 2. Press the button; the hour will start to flash.
3. Press – or + button to adjust the hour.
4. Press button once; the minutes will begin to flash.
5. Press – or + button to adjust the
minutes.

6. Press the button; the current set alarm time will begin to flash.
7. Then press + and repeat steps 2-6 for
A2 and A3. 8. Then press and hold for 3
seconds to save the alarm time setting (set alarm time will stop flashing).

Silence Alarm To acknowledge and silence the alarm when it goes off, Press the button.

Delete Alarm Setting

To erase the current alarm settings, go to

the alarm you want to delete. Press and
hold the + and – buttons simultaneously

for five (5) seconds while in the alarm

setting mode until

is displayed

on the screen.

Power ON/OFF the Device Press and hold button for three (3) seconds to turn the reminder ON/OFF.
Sleep Mode If the display remains inactive for 20 seconds, the clock will enter sleep mode to conserve battery life. To wakeup display from sleep mode tap
once.

Reset All Settings On the current time display, press and hold
the + and – buttons simultaneously for
five (5) seconds to clear and reset all settings.
NOTE: After resetting all settings, the device will shut down
Power Method Includes a Type-C charging wire; please use your own charging adapter.

How to Open and Remove Medicine Compartment
Do not immerse the bottom in water for cleaning

Safety Tips and Precautions:
1. Exercise caution to prevent burns while drinking hot beverages.
2. Keep the device out of reach of children.
3. Store medication in a location inaccessible to children.
4. The medicine compartment is removable and can be cleaned separately.
5. DO NOT submerge the bottom of the bottle in water.
6. DO NOT use the dishwasher to clean the device. Handwash only.

Medication Reminders
e-pill, LLC 49 Walnut Street, Bldg. 4 Wellesley, MA 02481, USA United States: 1-800-549-0095 International: +1-781-239-2941
www.epill.com

Disclaimer Responsibility for selection, safety, and suitability of any e-pill product rests with the user. The user maintains full responsibility to administer medication or perform associated tasks at appropriate times. e-pill products are only a supplement to any memory system currently used. e-pill, LLC assumes no responsibility for any incidental or consequential damages, including but not limited to, damages or injuries resulting from the malfunction of the product, mathematical or chronological inaccuracy or loss of stored data.

In no event shall e-pill, LLC be liable for incidental compensatory, punitive consequential, indirect, special, or other damages. Our aggregate liability with respect to all e-pill products is limited to its purchase price.
Version 231227 Printed in China