e-pill CADEX Vibra Plus 8 Alarm Vibrating Watch User Guide

e-pill CADEX Vibra Plus 8 Alarm Vibrating Watch

To switch between the 24-Hour format and AM/PM format: Tap ST/STP when the current time is shown.

CLOCK – Set time & date (required)

1. The display should show the time & the day of the week. If not, tap MODE repeatedly until both are shown.
2. Press and hold LIGHT for 5 seconds until seconds digits in the box begin to flash. Then let go.
3. Tap MODE and the minutes will flash. Tap ST/STP to change the minute. Tap MODE to save.
4. The hours will now flash. Tap ST/STP to change the hour, note the AM/PM indicator. Tap MODE to save.
5. The date will now flash. Tap ST/STP to change the date. Tap MODE to save.
6. The month will now flash. Tap ST/STP to change the month. Tap MODE to save.
7. The year will now flash. Tap ST/STP to change the year. Tap MODE to save.
8. Tap LIGHT to confirm time & date.

Note: To temporarily display the date while in Time Mode, tap RESET.

ALARMS – Set alarms in chronological order starting with the earliest

(required)

1. Tap MODE repeatedly until Alarm Mode is reached. “A1” is shown in the box.
2. Set Alarm 1, press and hold LIGHT until hour flashes. Tap ST/STP to change the hour. Tap MODE to save.
3. The minutes will now flash. Tap ST/STP to change the minute. Tap MODE to save.
4. Tap LIGHT to confirm Alarm 1 (A1).
5. Tap RESET to select a different alarm (A1-A8) and repeat steps 2 through 4 to set it.
6. Set alarm notification type. Tap ST/STP once for sound, twice for vibrate or three times for both.
7. Tap MODE repeatedly to go back to Time & Date.

Note

• To silence the alarm at alarm time, tap any button. We recommend tapping LIGHT.
• All alarms repeat automatically at the set time(s) the next day.

LOCK – Disable the buttons to prevent accidental reprogramming (optional)

1. The display should show the time & the day of the week. If not, tap MODE repeatedly until both are shown.
2. Press and hold MODE and RESET together at the same time.
3. “LOCK” will appear in the top left-hand corner of the display.
4. The LIGHT button will still function but ST/STP, MODE and RESET buttons have now been locked and disabled.

Unlock: To unlock and enable all buttons hold MODE and RESET together at the same time. “LOCK” will now disappear.

Answers to Frequently Asked Questions

1. Change the battery if the buttons stop working, the alarm is faint, or if the watch alarms/vibrates erratically.
2. Illumination: Tapping the LIGHT button only illuminates the digits (not the entire display). The function will only be noticeable when in a very dark room. At all other times, even at low light, the display will be readable.

Battery Change Instructions for Jewelers

Please go to your local jeweler with these instructions

Battery type: CR2032

1. Unscrew all 4 screws from the backplate.
2. Remove the backplate. The sound maker adheres to its inner face. Do Not Remove.
3. Using a toothpick or small screwdriver, lift the battery up from the indicated opening.
4. Remove the sticker (with metal conductor) from the battery. Be careful not to fold the sticker.
5. Place the sticker and conductor on a fresh battery. Make sure the sticker is centered.
6. Place the new battery with the attached sticker back into the battery slot.
7. Make sure the battery is flush with the white frame, and the metal spring is uncovered.
8. Replace the backplate, be sure “CADEX” has the same orientation as the front face of the watch.

8 Alarm Vibrating Watch

Item: 932349 / 932444

Thank you for purchasing the e-pill CADEX VibraPlus. Your watch has the following functions:

1. Up to 8 daily auto-repeating alarms
2. Smart countdown timer
3. Notification types: Sound, vibrate, or both
4. Alarm duration: 15 seconds
5. Button lock
6. Light (illuminates digits only)

Warranty

The inner components of this watch are warranted to be free from defects in materials and manufacturer’s workmanship for one (1) year from the original date of purchase. This warranty does not cover the band, buckle, battery, case, buttons, or the quartz crystal. Do not wear this watch in the shower or swimming pool, it is NOT WATERPROOF. This warranty expressly excludes incidental and consequential damage caused by use, misuse, neglect, accident, unauthorized modification, or any defects resulting from service by anyone other than the manufacturer. During the warranty period, and upon proof of purchase, this watch will be repaired or replaced (with the same or a similar model) at the manufacturer’s option. The e-pill CADEX VibraPlus watch is only a supplement to any memory system that you currently use to remind yourself to take your medications or perform medical tasks. The user maintains full responsibility to administer medications or perform medical tasks at the appropriate times. e-pill, LLC assumes no responsibility for any incidental or consequential damages, including but without limitation, damages or injuries resulting from malfunction of the product, mathematical inaccuracy, or loss of stored data.

4 Display Modes

Cycle through the 4 different display modes by tapping the MODE button.

AM/PM Format or 24-Hour Format

• To switch between 24-Hour format and AM/PM format: Tap ST/STP when the time is displayed (Time Mode).

Time and Date

1. The display should show the time & the day of week. If not, tap MODE until both are shown.
2. Press and hold LIGHT for 5 seconds until the seconds digits in the box begin to flash. Then let go.
3. Tap MODE and the minutes will flash.
4. Tap ST/STP to change the minute. Tap MODE to save.
5. The hours will now flash. Tap ST/STP to change the hour, note the AM/PM indicator. Tap MODE to save.
6. The date will now flash. Tap ST/STP to change the date. Tap MODE to save.
7. The month will now flash. Tap ST/STP to change the month. Tap MODE to save.
8. The year will now flash. Tap ST/STP to change the year. Tap MODE to save.
9. Tap LIGHT to confirm time & date.

Add Alarms

Set alarms in order starting with the earliest.

1. Tap MODE repeatedly until Alarm Mode is reached. “A1” will be shown in the box.
2. Set Alarm 1, press and hold LIGHT until the hour begins to flash. Then let go.
3. Tap ST/STP to change the hour. Tap MODE to save.
4. The minutes will now flash. Tap ST/STP to change the minute. Tap MODE to save.
5. Tap LIGHT to confirm Alarm 1 (A1).
6. Tap RESET to select a different alarm (A1-A8) and repeat steps 2 through 4 to set it.
7. Set alarm notification type. Tap ST/STP once for sound, twice for vibrate or 3 times for both. Sound: Vibrate:
8. Tap MODE repeatedly to go back to Time & Date. Silence the alarm: To silence the alarm at alarm time, tap any button. We recommend tapping LIGHT. All alarms repeat automatically at the set time(s) the next day.

Delete an Alarm

1. Tap MODE repeatedly until Alarm Mode is reached. “A1” will be shown in the box.
2. Tap RESET repeatedly until the alarm you would like to delete is shown in the box.
3. Press and hold RESET until the corresponding alarm bell disappears from the middle of the display. Repeat step 2 and 3 for each alarm you would like to delete.
4. When done, press MODE until you return to Time Mode. Display should show time & day of week. Your alarm(s) have been erased.

Smart Countdown Timer

The countdown timer only counts down within the time window that you set. Within these hours the watch will alarm every time the countdown reaches zero and automatically restart after alarming. To pause the countdown until the next day press ST/STP while in TR mode. To start a paused countdown press ST/STP while in TR mode.

Before you begin: When starting the countdown interval for the first time, the current time will need to be within the set time window.

1. Set the notification type. Tap MODE repeatedly until Alarm Mode is reached. “A1” will be shown in the box.
2. Tap ST/STP once for sound, twice for vibrate or 3 times for both. Sound: Vibrate:
3. Tap MODE until “TR” is shown above the line (TR Mode).
4. Press and hold LIGHT until the starting hour begins to flash, this is when the interval will start counting down every day.
5. Tap ST/STP to change the starting hour. Tap MODE to save.
6. The ending hour will now flash, this is when the interval will stop counting down every day.
7. Tap ST/STP to change the ending hour. Tap MODE to save.
8. The countdown duration hours will now flash, this is how many hours the countdown will last.
9. Tap ST/STP to change the duration hours. Tap MODE to save.
10. The duration minutes will now flash, this is how many extra minutes the countdown will last.
11. Tap ST/STP to change the duration minutes. Tap MODE to save.
12. Tap LIGHT to confirm countdown interval settings.
13. Tap ST/STP to start the countdown (TR will begin to flash).

When the countdown reaches zero: To silence the alarm and automatically restart the countdown timer, tap any button. We recommend tapping LIGHT.

Permanently turn off: To permanently turn off the countdown timer set both the starting and ending hour to 12am. Steps 3-7 above. Then tap MODE to return to time mode.

Lock

Disable the buttons to prevent accidental reprogramming. The LIGHT button will still function but ST/STP, MODE and RESET buttons will be locked and disabled.

1. The display should show the time & the day of week. If not, tap MODE until both are shown.
2. Press and hold MODE and RESET together at the same time.
3. “LOCK” will appear in the top left-hand corner of the display.

Unlock: To unlock and enable all buttons hold MODE and RESET together at the same time. “LOCK” will now disappear.

Stopwatch

1. Tap MODE until “ST” is shown above the line (ST Mode).
2. Tap ST/STP to start the stopwatch.
3. Tap ST/STP to stop the stopwatch.
4. Tap RESET to return to 0.

Battery

Change the battery if the buttons stop working, the alarm is faint or if the watch alarms/vibrates erratically. When replacing the battery we strongly recommend that you take your e-pill watch to a jeweler with the battery change instructions that are found on page 2. Your e-pill CADEX VibraPlus uses a CR2032 button cell battery. The CR2032 battery size is the most common watch battery in the world and can be found at any jeweler, grocery store or pharmacy.

Care

DO NOT IMMERSE IN WATER. Avoid exposing the watch to temperature extremes. Avoid dropping the watch. Avoid exposing the watch to gasoline, cleaning solvents, adhesive\ agents, paint, or aerosol sprays.

Caution

Dead battery, replacement of battery, malfunction or repairs will cause all data stored in the watch to be deleted. In no event will e-pill, LLC be liable for loss of data or damages arising from such loss. This watch will withstand splashes and rain but is not waterproof. DO NOT USE IN THE SHOWER, BATHTUB, OR SWIMMING POOL.

e-pill, LLC

• ADDRESS: 49 Walnut Street, Building 4 Wellesley, MA 02481, USA
• www.epill.com
• TEL: 1-888-726-8805 (International: +1 781 239 2941)
• Written by e-pill Medication Reminders in Boston, MA
• Printed in China

www.epill.com

References

• e-pill Medication Reminders: Pill Dispenser, Pill Box Timer, Pill Organizer & Vibrating Alarm Watch
• e-pill Medication Reminders: Pill Dispenser, Pill Box Timer, Pill Organizer & Vibrating Alarm Watch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>