INFINITY CUTTING TOOLS DPT-100 Essential Drill Press Table Package Instruction Manual
- May 15, 2024
- INFINITY CUTTING TOOLS
Table of Contents
INFINITY CUTTING TOOLS DPT-100 Essential Drill Press Table Package
Product Specifications
- Model: DPT-100
- Type: Drill Press Table
- Table Top: T-tracks included
- Fence: DPF-100 included
- Holddown Clamps: 2x aluminum (Model: 100-662)
- Manufacturer: Infinity Cutting Tools, LLC
- Address: 310 Mears Blvd. Oldsmar, FL 34677
- Contact: 813-881-9090
Product Usage Instructions
Assembly
- Identify all parts from the parts list.
- Place the drill press table top on a flat surface.
- Attach the DPF-100 Fence to the table using the provided hardware.
- Install the Holddown Clamps (100-662) onto the table for securing workpieces.
Usage
- Secure the workpiece using the Holddown Clamps.
- Adjust the Fence to the desired position for accurate drilling.
- Operate the drill press following the manufacturer’s instructions.
- Ensure the work area is clear before starting the drill press.
Frequently Asked Questions (FAQ)
Q: Can I use this drill press table with any drill press?
A: The DPT-100 Drill Press Table is designed to be compatible with most
standard drill presses. However, it is recommended to check compatibility with
your specific model before purchase. Q: How do I clean and maintain the
drill press table?
A: To clean, use a mild detergent and a soft cloth. Avoid abrasive cleaners
that may damage the surface. Regularly check for any loose parts and tighten
them as needed for maintenance. Q: Can I modify the table to add additional
features?
A: While modification is possible, it is recommended to consult with a
professional or the manufacturer before making any alterations to ensure
safety and proper functionality of the drill press table.
DPT-100 Drill Press Table Assembly Instructions
Parts List:
Table
- 1x: drill press table top with t-tracks
DPF-100, Fence
- 1x: fence rail
- 2x: fence end caps.
- 4x: fence cap press in retainers
- 2x: fence L brackets
- 2x: ¼-20 3/8” Pan head bolts
- 2x: ¼-20 D-nuts
- 2x: 2” x ¾” spacer
- 2x: ¼-20 X 3” hex head bolt
- 2x : ¼-20 star Knob
Hold down Clamps
- 100-662, 2x: aluminum
- hold down clamps
- 2x: ¼-20 x 3” bolt
- 2x: ¼-20 star knob
Mounting hardware
- 100-526, 2x: toggle clamps
- 12x: #10 x ¾” pan head wood screws
Infinity Cutting Tools, LLC
310 Mears Blvd.
Oldsmar, FL 34677
813-881-9090