AC INFINITY AC-IBS22 Grow Light System User Manual

: June 1, 2024
: AC Infinity

Table of Contents

AC INFINITY AC-IBS22 Grow Light System
Product Usage Instructions
PRODUCT WARNING
KEY FEATURES
PRODUCT CONTENTS
INSTALLATION
POWERING AND SETUP
STARTER GUIDE
UISTM PLATFORM
ADDING MORE LIGHTS
PROGRAMMING
AC INFINITY PRODUCTS
WARRANTY
Documents / Resources

AC INFINITY AC-IBS22 Grow Light System

AC-INFINITY-AC-IBS22-Grow-Light-System-product

Specifications

Product: ONBOARD SERIES GROW LIGHT SYSTEM
Models: ONBOARD S22, INBOARD S24, INBOARD S33, INBOARD S44
Model Codes: AC-IBS22, AC-IBS24, AC-IBS33, AC-IBS44
UPC-A: 819137022515, 819137022522, 819137022539, 819137022546
Features: Even Coverage, Samsung Diodes, Dimmable LED Driver, Thermally Optimized, IP65 Protection, UIS™ Compatible

Product Usage Instructions

Installation Instructions for IONBOARD S22/S24

Hang the steel hooks over your grow tent’s support beams.
While supporting your grow light, bend the steel hooks to insert the ends into the slotted holes of the end caps. Repeat on the other side.

Installation Instructions for IONBOARD S33/S44

Insert the steel hooks into the grow light’s slotted holes of the end caps.
Position your grow tent’s pole under the steel hooks. Install the pole onto your grow tent’s frame. (Recommend two people for this step)

Rope Clip Hanging Installation

Insert the steel hooks into the grow light’s slotted holes of the end caps.
Loop the rope clip hangers around your grow tent’s support beams. Hook the carabiners into the steel hooks.

Powering and Setup

Plug the power cord into an AC power outlet to power your grow light.
Connect an external controller for smart programming by plugging one end of the extension cord into the LED driver and the other end into your chosen controller.

Starter Guide

The charts below offer suggested mounting heights and light intensities for each stage in the growing process of your preferred method. These factors will vary based on the plant you are growing.
In dynamic placement, height refers to distance from the canopy (plant tip).

Frequently Asked Questions (FAQ)

Q: How do I adjust the light intensity on the IONBOARD Series Grow Light System?

A: You can adjust the light intensity using the convenient dimmer knob that allows you to set it at 20/40/60/80/100% depending on your plant’s growth stage.

Q: Is it necessary to use an external controller with the grow light system?

A: While not necessary, connecting an external controller will provide greater control and customization options for your grow light system.

WELCOME

Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us.
Visit www.acinfinity.com and click contact for our contact information.

MANUAL CODE IB2306X1

PRODUCT
- IONBOARD S22
- I ONBOARD S24
- I ONBOARD S33
- I ONBOARD S44
MODEL
- AC-IBS22
- AC-IBS24
- AC-IBS33
- AC-IBS44
UPC-A
- 819137022515
- 819137022522
- 819137022539
- 819137022546

PRODUCT WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

Ensure your power source conforms to the electrical requirements of this product.
Check your local code restrictions for additional safety measures that may be needed for a proper code-compliant installation.
Read all instructions before installing and using this product.
If you are unfamiliar with or have doubts about performing this product’s installation, seek the services of a qualified, trained, and licensed professional. Inappropriate installation will void this product’s warranty.
This product must not be used in potentially hazardous locations such as flammable, explosive, chemical-laden, or wet atmospheres.
Do not cover power cords with rugs or other fabric materials.
Safety precautions should be exercised during the installation, operation, and maintenance of this product.
Do not block or tamper with this product in any manner while it is in operation as it may cause electric shock, fire, or damage to this product.
Do not depend on the on/off programming as the sole means of shutting power from this product. Unplug the power cord before installing, servicing, or moving this product.
Do not operate this product while its cord is damaged, or if it malfunctions, has been dropped, or is damaged in any manner.

KEY FEATURES

AC-INFINITY-AC-IBS22-Grow-Light-System-FIG-1

PRODUCT CONTENTS

AC-INFINITY-AC-IBS22-Grow-Light-System-FIG-2

INSTALLATION

IONBOARD S22 / S24

STEP 1
- Hang the steel hooks over your grow tent’s support beams.
STEP 2
- While supporting your grow light, bend the steel hooks to insert the ends into the slotted holes of the end caps.
- Repeat this step on the other side of your grow light.

STEP 1
- Insert the steel hooks into your grow light’s slotted holes of the end caps.
STEP 2
- Position your grow tent’s pole under the steel hooks. Install the pole onto your grow tent’s frame.

ROPE CLIP HANGING

STEP 1
- Insert the steel hooks into your grow light’s slotted holes of the end caps.
STEP 2
- Loop the rope clip hangers around your grow tent’s support beams.
- Hook the carabiners into the steel hooks.

POWERING AND SETUP

STEP 1
- Plug the power cord into an AC power outlet to power your grow light.
STEP 2
- You may connect an external controller to set smart programming.
- Plug one end of the extension cord into the LED driver, and the other end into your chosen controller.

STARTER GUIDE

The charts below offer suggested mounting heights and light intensities for each stage in the growing process of your preferred method.
These factors will vary based on the plant you are growing.
In dynamic placement, “height” refers to distance from the canopy (plant tip).

UISTM PLATFORM

The UISTM platform enables you to connect a single central controller with several grow devices simultaneously. By creating this fully integrated system, you can power and program all your devices together or separately for optimized grow tent management.
Your grow system can be regulated using your controller hub or remotely on the AC Infinity app (paired with compatible controllers), where you will have access to automation programming and climate data.
You can also connect your favorite grow light and outlet device to integrate them into the UIS platform using our RJ11/12 adapter and control plug module.
Grow devices will be sold separately and may still be in development at the time of your purchase of this product.

ADDING MORE LIGHTS

AC Infinity smart controllers are equipped with multiple ports to add more grow lights and share the same programming.
Refer to the diagram below to learn how to connect additional units.
Smart grow light controllers can program light intensity levels and schedule activations of all grow lights plugged into its UIS ports.
An expansion dongle (sold separately) will allow you to connect additional grow lights past the number of units your controller can support.

Multi-Light Connection

EXTENDING THE CHAIN

Plug the male end of the splitter* into your UIS controller.
Connect a UIS device or power adapter to the first port of each tier to power your controller and the hub.
Ports 2-4 can connect to additional splitters or UIS devices. All devices plugged into this chain must be of the same type (ex. grow lights of any size) regardless of the length of the dongle chain.
This splitter is not compatible with UIS adapters such as the RJ11 Lighting Adapter.

Not included

PROGRAMMING

AC-INFINITY-AC-IBS22-Grow-Light-System-FIG-16

OFF / UIS MODE

Turning the knob to UIS switches the grow light off, or passes control over to your smart controller if one is connected.

INTENSITY LEVEL

Turning the knob from UIS will establish a set light intensity level in 20% increments, up to 100%.

AC INFINITY PRODUCTS

Advance Grow Tents

The CLOUDLAB series is a line of grow tents designed to create ideal growing conditions and facilitate indoor plant cultivation year-round.
Features 2000D thick Oxford canvas lined with inner diamond patterned mylar that maximizes grow light luminosity, and a reinforced frame with 150 lb. weight capacity. Includes a mounting plate to install your AC Infinity controller onto.

Inline Duct Fans

The CLOUDLINE series is a line of duct fans designed to quietly ventilate AV rooms and closets, as well as various DIY air circulation and exhaust projects.
Features a thermal controller with intelligent programming that will automatically adjust duct fan speeds in response to changing temperatures.

Carbon Filters

The duct carbon filter is designed to eliminate odors and chemicals for growing tents and hydroponic spaces.
It utilizes premium-grade Australian charcoal that features greater absorption power and a longer lifespan.
Enables maximum airflow to pass through as part of an intake or an exhaust system.

WARRANTY

This warranty program is our commitment to you, the product sold by AC Infinity will be free from defects in manufacturing for two years from the date of purchase.
If a product is found to have a defect in material or workmanship, we will take the appropriate actions defined in this warranty to resolve any issues.
The warranty program applies to any order, purchase, receipt, or use of any products sold by AC Infinity or our authorized dealerships.
The program covers products that have become defective, malfunctioned, or expressively if the product becomes unusable.
The warranty program goes into effect on the date of purchase. The program will expire two years from the date of purchase. If your product becomes defective during that period, AC Infinity will replace your product with a new one or issue you a full refund.
The warranty program does not cover abuse or misuse. This includes physical damage, submersion of the product in water, incorrect Installation such as wrong voltage input, and misuse for any reason other than intended purposes.
AC Infinity is not responsible for consequential loss or incidental damages of any nature caused by the product. We will not warrant damage from normal wear such as scratches and dings.
Contact our dealers department at dealers@acinfinity.com or 626-838-4656 for more information about our dealers and distributors program.
Contact our customer service department at support@acinfinity.com or 626-923-6399 for product and warranty assistance. Our business hours are Monday through Friday, 9:00 am to 5:00 pm PST.
If you have any issues with this product, contact us and we’ll happily resolve your problem or issue a full refund!

No part of the materials including graphics or logos available in this booklet may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without specific permission from AC Infinity Inc.
www.acinfinity.com
EMAILsupport@acinfinity.com
WEBwww.acinfinity.com
LOCATION Los Angeles, CA