Kanto PMX800 Full Motion Tv Mount User Manual

: September 3, 2024
: Kanto

Table of Contents

Kanto PMX800 Full Motion Tv Mount
Product Usage Instructions
FAQ
Product Information
Parts and Hardware
Documents / Resources

Kanto PMX800 Full Motion Tv Mount

Specifications:

Model: PMX800
Weight Capacity: 200 lb (91 kg)
VESA Compliant

Product Usage Instructions

Mounting Preparation:

Ensure you have all the necessary components listed in the manual.
Identify the appropriate screws and spacers for your TV.

Wall Mount Installation:

Use a detector to locate studs in the wall.
Drill pilot holes into the studs using the specified drill bit.
Attach the wall plate assembly to the wall using the provided lag bolts.
Adjust the level of the wall plate assembly as needed.

TV Mounting:

Place spacers if necessary to accommodate curved TVs or recessed mount holes.
Align the TV with the VESA pattern on the mount.
Secure the TV to the mount using the appropriate screws.

Finalizing Installation:

Ensure all connections are secure and cables are managed properly.
Double-check the alignment and level of the TV.

FAQ

Q: What should I do if my TV has recessed mount holes?
- A: You can use the provided spacers to ensure a proper fit and prevent damage to your TV.
Q: Can I use concrete anchors in drywall?
- A: No, concrete anchors should only be used in concrete walls that are at least 4 inches thick.
Q: How do I know if my wall can support the weight of the TV?
- A: Refer to the caution on page two of the manual for load limits and make sure to mount the TV on a structurally sound surface.

weight

Product Information

Thank you for choosing Kanto

Read these instructions fully before assembly and installation. If you do not understand these directions, or have any doubts about the safety of the installation, please consult a qualified installation contractor. Make sure there are no defective or missing parts. Do not use defective parts. Kanto cannot be liable for property damage or injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this product. If there is hardware missing, or if you are uncertain whether a part is defective, please contact Kanto directly using one of the methods below.

CAUTION

The maximum loading weight is 200 lb (91 kg). This mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury. The wall you plan to affix the Kanto mount to must be able to support more than 5 times the weight of the television and the mount combined. Do not use this product for any purpose other than to mount a VESA compliant TV on a vertical surface as outlined in this manual. Improper installation may cause damage to your TV or serious injury. This product should not be mounted on steel stud walls or cinder block walls. Consult a qualified installation contractor if you are unsure about the type of wall you may have.

Find product and installation resources online

Parts and Hardware

Supplied Parts and Hardware

Required Tools

Wood stud wall

Documents / Resources

| Kanto PMX800 Full Motion Tv Mount [pdf] User Manual
PMX800 Full Motion Tv Mount, PMX800, Full Motion Tv Mount, Motion Tv Mount, Tv Mount, Mount
---|---