baby trend BT09XXXA Stroller Wagon Infant Car Seat Adapter Instruction Manual

baby trend BT09XXXA Stroller Wagon Infant Car Seat Adapter

Product Specifications

• Product Name : Stroller Wagon Infant Car Seat Adapter
• Manufacturer : Baby Trend, Inc.
• Address: 13048 Valley Blvd. Fontana CA 92335
• Contact: 1-800-328-7363 (8:00 am ~ 4:30 pm PST)
• Website : www.babytrend.com
• Model Number : BT09XXXA

Product Usage Instructions

Assembly

1. Inspect the product for damaged hardware, loose joints, missing parts, or sharp edges before each assembly.
2. Follow the assembly instructions provided in the manual carefully.
3. If any parts are missing or broken, do not use the product.

Attachment of Additional Accessories
If additional accessories are received unattached, follow these steps to attach:

1. Open Clips as shown in Fig. 1a to Fig. 1c.
2. Open flaps as shown in Fig. 1d and close clips by pressing hard as shown in Fig. 1e and Fig. 1f.
3. Follow the specific attachment instructions provided for different accessories.

Infant Car Seat Safety

• Always ensure the infant car seat is properly positioned and secured with the safety strap.
• The seat back should not be positioned too upright to prevent the child’s head from falling forward.

WARNING

• IMPORTANT!
  • To ensure safe operation of your product, please follow these instructions carefully. Please keep these instructions for future reference.
  • Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.
  • Adult assembly is required. Keep child away during unpacking and assembly

PARTS

ADDITIONAL ACCESSORIES

fabric cover
This adapter type is only compatible with Stroller Wagons (WG01, WG03).

For wagon, car seat instruction manual and compatibility chart (visit babytrend.com).

• Only compatible with models sold in the U.S.
• Compatibility is subject to revision over time.

ASSEMBLY

If received unattached, follow the below instructions to attach: Fig. 1b Fig. 1c Fig. 1a

1. Unfold the adapter and place it on a flat surface (Fig 1a). Connect both ends of the adapter bars together as shown on (Fig 1b).
   NOTE : Ensure both pins click into the holes. Flip the adapter (Fig 1c).

   • Always remove the child tray and canopy from the wagon to install the adapter. Refer to WG01 and WG03 manuals for removal instructions of the child tray and canopy
   • Open the clips on both sides of the adapter, open the flaps on the wagon cover to expose the bar connection (Fig. 1d). Face the front of the adapter to the front of the wagon. Align the clips to the bar as you press them into place (Fig. 1e). Close the clips firmly from the inside with your thumbs and check that it is secured into the frame (Fig. 1f).

2. REMOVAL : To remove the adapter wrap your thumbs over the wagon frame and use all your other fingers to apply pressure on the clip to release it from the bar (Fig. 2). NOTE : Refer to pages 7 and 8 for car seat installation.
   INFANT CAR SEAT Sold separately

3. Place the car seat onto the Car Seat Adapter. The front of the car seat should be facing the same direction as the stroller wagon handle. Ensure the car seat stoppers are resting on the Adapter Bars (Fig. 3a).

   • Strap the Safety Belts through the Belt Path on the Car Seat and connect the buckles together (Fig.3b). Tighten the strap so it fits snugly and the car seat is secured to the frame (Fig. 3c).
   • NOTE : The Safety Belt MUST ALWAYS be installed through the Belt Path before using this product.
   • REMOVAL : Release the safety strap (Fig. 3d), reverse step 3 and then follow step 2.

WARNING : Always ensure the infant car seat is properly positioned, secured with the safety strap with the seat back NOT positioned too upright. The child’s head should sit back against the seat. If the seat back is positioned too upright, a newborn to six months old child’s head could fall forward.

Copyright © 2024, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE, AND REPAIR.

The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product that has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user. Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/ limited-warranty for complete warranty details.

FAQ

Q: Can this product be used with all Baby Trend stroller wagons?
A: The product is only compatible with models sold in the United States. Please check the compatibility of your specific model on babytrend.com.

Q: What should I do if I find damaged parts during assembly?
A: Do not use the product if any parts are damaged. Contact Baby Trend customer service for assistance.

References

• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!
• Limited Warranty Coverage – Baby Trend
• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>