OzSpy NIHV6000 Full Color Night Vision Binocular User Manual

NIHV6000 Full Color Night Vision Binocular

“`html

Specifications:

• Full Color Night Vision
• 3.0 Inch LCD Screen
• 32GB micro SD card included
• Built-in 5000mAh lithium battery
• Supports micro SD card up to 128GB

Product Usage Instructions:

Power Supply:

The night vision device is powered by a built-in 5000mAh lithium
battery, providing up to 5 hours of usage in night mode. Use the
included USB charging cable to charge the device.

Inserting / Removing the SD Card:

1. Insert the micro SD card into the card slot until it locks in
   place.

2. To remove the SD card, push it inward and it will pop out for
   removal.

Turn On/Off:

To turn on/off the night vision, press and hold the power button
for 3-5 seconds. Remember to turn off the device before
charging.

Adjustment Mode:

The night vision has 3 modes: Photo Mode, Video Mode, and
Playback Mode. Switch between modes by pressing the corresponding
buttons. In Video Mode, you can activate the Picture-in-Picture
(PIP) function by pressing the designated button.

Photo Mode:

1. To switch to Photo Mode, press the mode button until the icon
   appears on the screen.

2. Press the OK/Shot button to take a picture.

3. You can adjust the pixel size in the menu settings if
   needed.

FAQ:

Q: How do I view the photos and videos captured by the night

vision device?

A: You can download the media to your computer using a card
reader or USB cable connected to the device.

Q: What is the recommended distance between my eyes and the

eyepiece/display during use?

A: To view images more clearly, maintain a certain distance
between your eyes and the eyepiece/display and avoid getting too
close.

Q: How long does the battery last in night mode?

A: The built-in 5000mAh lithium battery provides up to 5 hours
of usage in night mode.

“`

Full Color Night Vision
User Manual

Introduction
Thank you for purchasing the full color night vision.
This manual will help you optimize your viewing experience by explaining how to utilize the binoculars controls and features, and how to care for them.
Read the instructions carefully before using your night vision.
The night vision can be used day and night. The IR light is not turned on during the day, and the pictures or videos are displayed in color, but this full color night vision can be used at night in color, and need in the low light conditions. In low light conditions or even complete darkness, turn on the IR lights to see your surroundings. You can also take photos and videos, which will be stored on the included 32GB micro SD card.
Download them to your computer using a card reader or USB cable.
Note: To see the image display more clearly, please keep a certain distance between your eyes and the eyepiece/display during use, do not come close.
We are always happy to help!

Product Overview:

1. Power Button 2. IR UP/Zoom In/UP Button 3. IR Down/Zoom Out/ Down Button 4. Mode Button 5. Menu/Return Button 6. OK/Shot Button

7. 3.0 Inch LCD Screen 8. IR light 9. Lens 10. USB Port 11. SD Card Slot 12. Manual Focus Wheel

MENU Function

Brightness Resolution Image Size Loop Recording Date/Time Record Audio Language Auto Power Off Frequency Key Tone Format Default Version

1/2/3/4/5 4K/2K/1080P/720P 60M/48M/42M/36M/32M/30M/24M/20M/12M/10M/8M/5M/3M Off / 1 Minute/3 Minutes/5 Minutes 2023/01/31 01:00 Off / On English/Deutsch/ Français/Italiano/ Español/// Off /1 Minute/2 Minutes/ 3 Minutes/ 5 Minutes 50Hz / 60Hz Off / On Cancel / Ok (All data will be deleted) Cancel / Ok (Return menu setting to default) 20230418

LCD Display Information
Video Mode

Photo Mode

Playback Mode

Brightness Setting

Resolution Setting

Image Size Setting

Loop Recording Setting

Date/Time Setting

Record Audio Setting

Language Setting

Auto Power Off Setting

Frequency Setting

Key Tone Setting

Format Setting

Default Setting

Version Information

Power Supply
Night Vision has a built-in 5000mAh lithium battery, which can be used for up to 5 hours in night mode. Equipped with a display USB charging cable, you can directly observe whether the fuselage indicator is fully charged. (When the product is turned on, the indicator light is always blue; the indicator light is red when charging; the indicator light is off when fully charged.)

Red light is charging

Inserting / Removing the SD card
1. Insert the micro SD card into the card port and push until it locks in place. 2. To remove the installed micro SD card, please push the card inward and it will come up.
Tip: It is recommended to use a micro SD card (Max support 128GB).

Turn On/OFF

1. Hold the

button for 3-5 seconds to turn on/off the night vision.

Note: Please turn off the device before charging.

Adjustment Mode

The night vision has 3 modes and you can switch between them by pressing the

Photo Mode

Take photo

button

Video Mode

Video recording

Playback Mode

Play back picture/video

Note: In Video Mode, short press the down when press it again.

button, it can turn on the PIP function, it will be shut

Photo Mode

1. The default is video mode after power on, please press the mode, the icon will appear in the top left corner of the screen.

2. Press the

button to take a picture.

button to switch to photo

3. The default is 8MP, if you need to choose a higher pixel photo, please press the to enter the menu and select.

button

Video Mode

1. The default is video mode after power on, if not video mode, please press the and select the video mode, the icon will appear in the top left corner of the screen.

button

2. Press the recording.

button to start recording the video and press the

button again to stop

3. In Video Mode, short press the when press it again.

button, it can open the PIP function, it will be shut down

Playback Mode

1. Watching stored videos and photos: press the

button and select playback mode. You

may toggle through your saved photos or videos with

and

buttons.

2. Deleting stored videos and photos: in playback mode, please press the

button, you can

use the

or

button to select to delete/protect the image you are viewing from the

micro SD card, then press

button to delete/protect the image.

Full Color Image
1. In low light conditions, you can use the full color function of night vision, the color is colored , not black and white, and don’t need to turn on the IR light.

2. In darkness, can not use the full color function, please short press the the IR light, but it is black and white on the photo or video mode.

button to turn on

Quick Start
1 Insert Micro SD cardMax support 128GBLong press key to 3-5sthe indicator light shows blue, the device will power onAfter power onadjust the object clearly through the focus wheeland press key manual take photo or video recordand long press key to shutdown
2 Press key setting work modephoto videoplaybackon playback mode
press key to playback and press key againexit playback
3 Press keyenter to menu setting parameterspress or up or down key to select
and press key to confirmafter settingspress key again to back and exit menu
4 Short press key to open IR LED press it again to add one level until 7 Levels (Max)
short press key to reduce one level until 0 level (Mini) and close IR LED
5 Long press keyZoom inMax 5X long press keyZoom outMini 0X for the objects of long range or nearly range Zoom in or out first ,and adjust the clearly object through the focus wheelpress key to take photo or video record and save SD card Note Turn on IR LED statuscan not zoom in or outneed to close IR LED first
6 Long press key 3-5s to shutdowntake out SD card after shutdownread the data files with card reader or connect USB cable on PC
7 Chargingthe indicator light shows red, and connect it to DC 5V adapter or Power Bank with USB cable; the indicator light goes out when full charging.
Note: The adapter is not included, the user uses the adapter, we recommend using DC 5V 1A to avoid damaging the battery as much as possible.

Product Parameters

Aperture Lens Angle Display Screen Digital Zoom Storage Media Viewing Distance in darkness Viewing Distance in daytime IR LED USB Port Power Source Full Color Picture in Picture (PIP) Operating Temperature Storage Temperature

F0.8 f=35mm FOV 20º, diameter: 35mm Inner 3.0 inch LCD 5X Micro SD Card, Max support 128GB 150-300M 3M~Infinity 5W, 850NM, 7 levels Type C, USB 2.0 Built- in 5000mAh battery Support Support -20 to +60 -30 to +70

Download Files to the PC
There are two ways to download images from night vision memory cards to on computer.
1. Use SD card reader Pop up the SD card from the machine and insert the card reader to connect to the computer. Open my computer, double-click the removable disk Copy the files from the memory card to the computer Tip: The card reader is not included.
2. Connect the night vision to PC by USB cable Turn on the night vision, and connect it to PC by USB cable Tip: only support windows system. “Mass Storage” will appear on the screen Open my computer, double-click the removable disk Copy the files from the memory card to the computer

Questions & Answers
1. Q: What should I do if I can’t boot up? A: Please charge the night vision first, connect the USB to DC 5V or power bank by USB cable, and try to turn it on.
2. Q: What should I do if the screen display is abnormal? A: You can shut down first, then restart.
3. Q: What should I do if I cannot connect to the computer via USB cable? A: Please check whether the USB cable is good, whether the interface is inserted in place, whether the computer USB interface is good, etc.
4. Q: What should I do if the device cannot read the memory card? A: Please check whether the memory card is inserted into the device correctly, and the quality of the memory card is good, the maximum is 128GB (it is recommended to format the memory card before using it), or please replace other type memory card.
5. Q: How to adjust the date and time? A: Press the MENU button, enter the menu to select the date/time via Up and Down button, and setting the date and time to the current.
6. Q: How to close the sound of the device? A: Press the MENU button, and enter the menu to select the Key Tone via Up and Down button, and select Off.
7. Q: How to turn off or on the IR light?

A: Adjust the IR level by short pressing

or

up shift, IR- is down shift and turn off the IR light. 8. Q: How to zoom in or out?

button, IR+ is turn on the IR light and

A: Long press

to zoom in, long press

to zoom out.

9. Q: What if the screen suddenly freezes after startup or during use? A: Press MENU+MODE button at the same time to reset.
10. Q: How to open PIP (picture in picture) function?

A: In video mode and power on, short press

button to turn off or on PIP.

11. Q: When to use the full color mode? A: In low light conditions, turn on the machine, aim the device at the target object, adjust the lens until the target object is clear, and the object is in color.

Tips & Warnings
1. The device can not be activated. Please charge the device first, connect the USB to DC 5V 1A adapter or a power bank, and try it to turn on.
2. Focusing the image Target the object you would like to view and turn the object focusing wheel until the image on the screen comes sharp and clear.
3. Cleaning the night vision Before cleaning the machine, disconnect the power and clean the outside of the machine with a dry dustless cloth. To avoid damage to the machine, do not use ant cleaning fluid, clean eyepiece or lens, just use a cleaning cloth gently wipe the test, protect the lens from scratch. Protect the machine from dust and moisture, and store it in a bag or box.
4. About the adapter The adapter is not included, the user uses the adapter, we recommend using DC 5V 1A .
5. Can work through windows? Whether or not the IR light it turned on, the device cannot observe objects through windows glass.
6. Can work in water? Do not use the night vision in water as it will damage the device and the damage will not be covered by the warranty.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>