OzSpy HAIX1RT2MP Hidden Camera Router User Manual
- June 4, 2024
- OzSpy
Table of Contents
- OzSpy HAIX1RT2MP Hidden Camera Router
- Camera Lens with 30° Up View Angle Installation location
- Quick guide on Wi-Fi camera function
- Overview
- In the box
- Product structure
- Wi-Fi Camera Connection Setting
- Camera Normal Status
- APP Introduction
- Specification
- FAQ
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
OzSpy HAIX1RT2MP Hidden Camera Router
Camera Lens with 30° Up View Angle Installation location
- Place on desk great than or equal to 1-meter height;
- If on a side wall, place at 3-4 meters height;
- Can be placed on the desk, side wall, and ceiling.
Tips: Please take off the transparent protection film on the device and replace it with a black lens cover (Plastic) before using.
Quick guide on Wi-Fi camera function
-
Download & Install Free App
from App Store or Google Play;
Tips : Please allow “CamSC” to notify, Bluetooth and location while using the App. -
Enter App, select your region at the top right corner, and register;
Tips : If a code doesn’t arrive, please check the spam folder first. -
Take off back cover–>lnsert micro SD card –> Turn back ON/OFF switch, press reset key 4 seconds till a beep sound {Pairing mode is ready now).
-
Enter App, Click + » Smart Home » Pairing Mode » Click device name » Select Wi-Fi » Input password > NEXT.
-
The device is online in around 1 second & Wi-Fi live video is ready.
P .S: Contact the local dealer for the tutorial video setup.
Overview
The Ultra Long Standby WiFi Security Camera, it is built with the high tech of super low power consumption 450µNhour to save energy for around half a year standby after being fully charged. First, it can be used for watching live streaming video day and night (night vision around 5 meters), or taking photos and videos by APP on a smart-phone remotely after WiFi is connected; Second, its PIR sensor will make precise motion detection recordings for surveillance use (around 5 meters in distance and 2 meters in height). Also, it has a cycle recording and works when charging.
Usages: Nanny camera, Home/ Shop/ Office/ Warehouse surveillance camera.
Warning: ” illegal 11 use is not allowed! Or, there will be consequences to bear! to bear! to bear!
In the box
- 1 x Micro SD Card Reader
- 1x Camera Unit
- 1x User Manual 2 x Batteries Inside Device (Default) 3 x Screws
- 1x USB Cable
Product structure
- camera
- Invisible night vision LEDs
- Light sensor
- PIR PIR sensor
- Antenna
- TIPS: Push the bottom cover right to open.
- Mic
- Camera speaker
- USB port
- Bottom cover
- ON/OFF switch
- Charging indicator
- Reset key
- WiFi indicator
- Micro SD card slot
- 2xBatteries inside the device(Default)
TIPS: Please point the arrows in the direction of the monitoring area when installation!
Reset key tips
- One press to restart the device;
- 4 seconds press to pair with WiFi (First double beep);
- 6 seconds press to reset the device (Second double beep).
Wi-Fi indicator tips
- Blue LED blinking when pairing with WiFi;
- Turn off when WiFi paired;
- Blink once when motion is detected.
Charging indicator tips
Solid red when charging, and off when fully charged.
Wi-Fi Camera Connection Setting
Step1: CamSC APP
- Scan below QR code or search and download a free APP named
in the Apple APP store, Google play, or Electronic market, and install it; - Open APP CamSC, select the current region at the top right corner, and Register with email, or a third-party account like Facebook or IOS account. (Tips: If a code doesn’t arrive, please check the spam folder first)
Step 2: Take off back cover–> Insert micro SD card –> Turn back ON/OFF switch (WiFi indicator is solid blue.);
Step 3:Connect WiFi
- Press the Reset key 4 seconds till a beep sound(WiFi indicator blink slowly and ready for pairing WiFi);
- Open APP CamSC » Click + » Smart Home » Device in pairing mode >> CAM-xxxxxx.
Click > at the end of WiFi to select the local router WiFi, then input password. Click NEXT and wait around 10 seconds to finish the configuring; Device Binding Successful and online now.
Click setting in APP’S first interface, select Time Zone and choose Time Zone to ensure live streaming video with the set time zone.
Camera Normal Status
- The camera is always in standby mode;
- Once motion is detected, it will push a notification to the phone, do a snapshot and record a 15 seconds video clip into the memory card;
- Sleep and alert after 1 minute once motion is detected again.
Set name : Press the setting after the camera, select Device Name –> Input needed name like Office, Living room, etc
APP Introduction
Specification
Resolution | 2 Mega CMOS |
---|---|
Video pixel | 1920’1080 |
Compressed format | H.264 |
View angle | 145 Degree |
Type of memory card | TF card >=Class 4/10 |
and HC marked
Maximum capacity of memory card| 64GB
Mobile phone operation system| Android/iOS
Compatible router| 2.4G and Mobile hotspot
Two way talking| Yes
PIR alarm pictures in server| 15days
Battery capacity| 2 x 2600mAh(Default)
4 x 2600mAh(Optional)
Standby power consumption| SOOµA
Power consumption| 350mAh
Power consumption with night vision| 610mAh
Recording| 1 minute/ around 24MB
Standby time x 2 batteries| Around 1 year
---|---
Charging time x 2 batteries| Around 12 hours
Standby time x 4 batteries| Around two year
Charging time x 4 batteries| Around 24 hours
Power adapter (not included but needed)| 5V
I 2A
FAQ
- Is the device with offline and low power notification?
- Yes.
- What does the device do when WiFi is off?
- Keep searching for WiFi signal 3mins, 10mins, 1 hour, 2 hours, 5 hours, 24 hours later; If WiFi is on, it will be connected to WiFi automatically.
- If the steps on Page 11 can’t move forward (Bluetooth Pairing Mode)?
- Delete the App and Download again to test, and agree on all permissions (Allow notification, Bluetooth, and location).