OzSpy AI-LS002 Ultra Long Standby Wi-Fi Security Camera User Manual
- June 4, 2024
- OzSpy
Table of Contents
OzSpy AI-LS002 Ultra Long Standby Wi-Fi Security Camera
Quick guide of Wi-Fi camera function:
-
Download & Install Free App
from App Store or Google Play;
Tips: Please allow “CamSC” to notification, Bluetooth and location while using the App. -
Enter App, select your region at the top right corner and register;
Tips: If a code doesn’t arrive, please check the spam folder first. -
Insert micro SD card –> Turn back ON/OFF switch, press reset key 4 seconds till a beep sound (Pairing mode is ready now).
-
Enter App, Click+» Smart Home» Pairing Mode» Click device name» Select Wi-Fi » Input password > NEXT.
-
Device online in around 10 seconds & Wi-Fi live video is ready.
P.S. : Contact local dealer for tutorial video setting up.
Overview
- The Ultra Long Standby WiFi Security Camera, it is built with high tech of super low power consumption 450µA/hour to save energy for around half an year standby after being fully charged.
- First, it can be used for watching live streaming video day and night (night vision around 5 meters), or taking photo and video by APP in smart-phone remotely after WiFi connected;
- Second, its PIR sensor will make precisely motion detect recording for surveillance use (around 5 meters distance and 2 meters height) Also, it has cycle recording and work when charging.
- Usages: Nanny camera, Home/ Shop/ Office/ Warehouse surveillance camera ….. .
Warning : ” illegal use is not allowed! Or, there will be consequences to bear!”
In the box
- 1 x Camera Unit
- 1 x Micro SD Card Reader
- 1 x USB Cable
- 1 x User Manual
- 1 x Bracket accessories
Product structure
- camera
- Invisible night vision LEDS
- PIR sensor
- Micro SD card slot
- Reset key
- Charging indicator
- camera speaker
- USB port
- Light sensor
- WiFi indicator
- ON/OFF switch
- Mic
- Bracket
Reset key tips:
- One press to restart device;
- 4 seconds press to pair with WiFi (First double beep);
- 6 seconds press to reset device (Second double beep).
Wi-Fi indicator tips:
- Blue LED blinking when pairing with WiFi;
- Turn off when WiFi paired;
- Blink once when motion detected.
Charging indicator tips:
- Solid red when charging, and off when fully charged.
Wi-Fi Camera Connection Setting
- Step1: CamSC APP
1. Scan below QR code or search and download free APP named <CamSC> in Apple APP store, Google play or Electronic market, and install it;
2. Open APP CamSC, select current region at the top right corner. Register with email, or a third-party accounts like Facebook or IOS account. (Tips: If a code doesn’t arrive, please check the spam folder first.)- Step 2: Insert micro SD card -> Turn side ON/OFF switch (Wi-Fi indicator is solid blue.};
- Step 3: Connect WiFi
1. Press Reset key 4 seconds till a beep sound(WiFi indicator blink slowly and ready for pairing WiFi);
2. Open APP CamSC » Click + » Smart Home » Device in pairing mode >> CAM-xxxxxx.
3. Click > at the end of WiFi to select the local router WiFi, then input password. Click NEXT and wait around 10 seconds to finish the configuring; Device
Binding Successful and online now.
4. Click in APP’S first interface, select Time Zone and choose Time Zone to ensure live streaming video with the set time zone.Camera Normal Status
- Camera always in standby mode;
- Once motion detected, it will push a notification to phone, do a snap shoot and record a 15 seconds video clip into memory card;
- Sleep and alert after 1 minute once motion detected again.
Set name: Press the after the camera, select Device Name –> Input needed name like Office, Living room etc …
APP Introduction
Specification
| Resolution | 2 Mega CMOS |
|---|---|
| Video pixel | 1920’1080 |
Compressed format
View angle
| H.264
145 Degree
Type of memory card| TF card >=Class 4110 and HC marked
Maximum capacity of memory card
Mobile phone operation system
| 64GB
Android/iOS
Compatible router| 2.4G and Mobile hotspot
Two way talking
PIR alarm pictures in server
| Yes
15days
Battery capacity| 2600mAh
Standby power consumption
Power consumption
| 500A
350mAh
Power consumption with night vision| 610mAh
Recording| 1 minute/ around 24MB
Standbv time
Charging time
| Around half a vear
Around 6-7 hours
Power adapter (not include but needed)| 5V/2A
FAQ
-
Is device with offline and low power notification?
Yes. -
What does the device do when WiFi off?
Keep searching WiFi signal 3mins, 10mins, 1 hour, 2 hours, 5hours,24hours later; If WiFi on, it will be connected to WiFi automatically. -
If the steps in Page 9 can’t move forward (Bluetooth Pairing Mode)?
Delete the App and Download again to test.and agree all permissions (Allow notification, Bluetooth and location).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>