OzSpy HHUHDSTKV8 FHD USB Stick Camera with Screen User Manual

OzSpy HHUHDSTKV8 FHD USB Stick Camera with Screen

• Please read this user guide carefully before use

• If you want to read the data, please use the original data cable
  (Other data lines may not be connected properly)

• This machine must be charged with 5V voltage. If use 9V fast, the machine may be burned

PRODUCT OVERVIEW

Shutdown Function

1.  press the bright screen button Lightly to display the time, and it will go off after 15 seconds (the bright screen button cannot turn off the screen).
2. Press the button lightly, please do not press the button vigorously!
3. The machine will reserve a little battery for use as a watch. When the battery is low, it can only display the time. At this time, it needs to be charged before it can be used normally
   (Don’t think the lock key is unresponsive)!

Shutdown interface

Recording Function

• Recording: put the switch to the recording position,
• The screen as shown in the recording interface, start recording;
• Save: put the switch to the off position ,
• The screen returns to the shutdown interface ,save recording.

Recording interface

Video Function

• Video: put the switch to the video position, The screen as shown in the video interface, start video;
• Save: put the switch to the off position , The screen returns to the shutdown  interface ,save video.
• Tip: In a well-lit environment, please aim the lens at the subject, keep a distance of more than 50cm from the subject and avoid jitter. This will result in natural colors, clear scenes, and stable images. This product has high-definition video and large video files. When the storage is full, the files will be overwritten in cycles, please save them in time.

Video interface

Format (clear data)

You can use formatting when the machine is faulty or you need to clear the data. Pay attention to backing up important files!
Steps：

1. Connect the computer through data cable；
2. Double-click on my computer, find the machine letter
3. Back up the important files first
4. Right click on the drive letter, find the formatting option, left click
5. The file system selects FAT32 ， the allocation cell size is 32KB
6. Click Start, wait for the format to succeed, and exit the normal use of the machine.
   (Note: If there is no FAT32/32KB option on the computer, you can also download the software DISKGENIUS for formatting)

Time Setting

Set the machine time and record the Video time.

• Method 1：

1. Connect the machine with the computer, find the <SET TIME.exe> in the machine;
2. Copy the file to the desktop for backup, then double click the left button to open the synchronization tool. Then click Exit to exit;
3. In the case of constant power, the modified time will be maintained, and the machine needs to be reset after a long period of time.

• Method 2：

1. Connected the machine to the computerFind the TIME text file (.txt) in the machine (if the time modification is unsuccessful, you can delete the TIME file directly and reconnect to the computer, and the time must be two digits);
2. Open the file, change the content of the file and write it at the beginning without leaving spaces.  

For example: Original time: 2020-05-01，13:59:59
Time to be changed: 2020-08-15,04:52:09
The content of the modified file is as shown in the figure, and it will be closed after saving;

3. Disconnect the computer and start the machine immediately.  

After power off once, the system will read the changed time automatically, and it will keep the modified time running when the power is uninterrupted. You need to reset the time after the machine has been out of power for a long time. (After the machine system reads the time, the content of the document will be restored to the original time: 2020-05-01, 13:59:59)

Charging (Notes)

You can use a 5V charger or a computer to charge. When the machine is charging, the battery gauge is jumping; when the battery is full, the battery gauge shows full charge. The charging time is about 2 hours.
Tip: If the machine has not been charged for a long time and the battery is too low, please use the charger to charge, otherwise you can use the computer to charge.

Data connection

The machine needs to be connected to the computer in a shutdown state. To ensure a stable connection, please use the original data cable to connect to the computer.1/ It can be connected to a computer and used as a computer camera.2/ You can view the recorded files inside the machine. If the video cannot be played normally or freezes, you can copy the file first and download the Tencent player to play the file.

Function parameter

Product type| Voice recorder| Battery| Environmentally friendly

polymer lithium battery

---|---|---|---
Machine time| Self-synchronization| Voltage| 3.7V
Charging time| Around 2 hours| Battery

capacity

| 300mAh
Photo format| JPG| Camera

resolution

| 1920*1080
Video format| AVI| Video

resolution

| 1920*1080 30 frames/sec
Lens parameters| F/NUMBER 2.25| FOV| 65°

Q&A

When there is a problem, you can use the card pin to insert the reset hole first, and press the reset button lightly (you can feel the button is pressed and popped) to solve most of the problems.

1. Connect to a computer or mobile phone, can not find the disk, the connection is unstable, not charging?
   Please be sure to use the original data cable, otherwise the disk cannot be found and the connection is unstable. In addition, to connect the phone, make sure that the phone has OTG function and is turned on.

2. No response when power on?
   Because only the time function is retained when the battery is low, you should wait patiently for 2 hours after charging and try again.

3. Poor audio and video effects, blurred?
   The recording effect is better within 5 meters. The recording distance is about 2.3 meters. You can wipe the lens position before recording. Fingerprints can cause unclearness, and strong jitter can also cause blurring of the video.

4. No files after video and recording?
   It may be caused by a memory file system error. Please wait for the machine to run out of power, connect to the computer, and operate according to the instructions [Format (clear data)] (back up important data before formatting). Correct the file system of the machine to FAT32/32KB. If there is no FAT32/32KB option on the computer, you need to download the software DISKGENIUS to format it.

5. Time synchronization is not successful?
   Follow the instructions [Time Setting] to operate, pls try the first method with a computer ; If it doesn’t work, you can use method two. Make sure that the file format is correct (if the file is wrong or cannot be changed, you can delete it directly, and the TIME.txt file will be regenerated after rebooting). After the file change is saved (make sure to change The file is still a txt file), eject the machine on the computer or mobile phone first, and then unplug the machine to prevent unsuccessful file synchronization due to unplugging the machine directly.

6. Do you need to reset the time when the machine is out of power?
   The machine will reserve a little battery for time use. It can be used for about 1 week. Please charge it in time. If it is completely out of power, you need to resynchronize the time.

7. Can’t charge by the computer?
   If the machine has not been charged for a long time, resulting in a very low battery, please use the charger to charge, otherwise you can use the computer to charge.

8. The video playback effect is not good.
   Please copy the video file to your computer or mobile phone and play it. In addition, you can download the Tencent player for better playback effect.

9. The file recorded before is missing?
   This product has high-definition camera and large video files. 8GB can save about 50 minutes of video (other capacity can be calculated). When it is full, it will overwrite the file. Please save it in time.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>