SOFLOW SO ONE PRO Electric Scooter User Manual
- June 15, 2024
- SOFLOW
Table of Contents
SOFLOW SO ONE PRO Electric Scooter User Manual
1. Getting started
1.1. What’s in the box
This package contains:
➢ 1x SO ONE Pro Scooter
➢ 1x Battery charging device
➢ 1x Extension valve
➢ 1x User manual
➢ Set of tools
➢ 1x Gift card
If one of the items is missing, please contact your authorised supplier immediately. We recommend keeping your packaging for the length of warranty.
♻ We have designed the packaging to be completely recyclable. After this date, please recycle it responsibly. Keep a hold of your box for the duration of your e-scooters warranty.
1.2. Setting up your new Scooter
Your new So Flow scooter has been thoroughly checked and part-assembled by our technicians. It’s almost ready to ride just follow these simple set-up instructions and you’ll be ready to go!https://qrco.de/bdHk9e
-
Raise the stem
Remove the protective packaging but do not lift the scooter out of the cardboard frame just yet. Lift the stem until it clips upright into the frame. -
Secure the latch Pull down the latch mechanism until it clips securely.
Warning! Do not ride the scooter if the latch is loose. -
Charge the battery
You can charge your e-scooter by plugging the charging cable into the charging port. Once fully charged the charger light will change from red to green.
Warning!
Do not ride the scooter if the latch is loose.
How to fold your scooter
2. How to use your E-scooter safely
2.1. Riding instructions
- First, turn on your e-scooter by pressing and holding the power button for 2 seconds. The display will switch on.
- To start riding, lift up the kickstand, place one foot on the footpad and push against the floor with your other foot to propel you forwards.
- After you’ve pushed yourself forwards, press the throttle with your thumb steadily to start accelerating. You will need to achieve a speed of 3km/h before the throttle will engage.
- Steer by turning the handlebars left and right. The steering mechanism is sprung loaded to help it return to centre, and to make it easier to steer during prolonged use.
- You can slow down the e-scooter by pulling the brake lever. Braking activates both the electrical rear brake and the front drum brake.
- To come to a stop, slow to almost a standstill. Then, place one foot on the ground, leaning slightly onto that foot as you come to a complete stop.
2.2. Handle bar controls Brake
To change the Drive mode, double press the power button. To change the speed unit between miles/hr and km/h triple press the power button. You can use NFC to lock and unlock the scooter. The location of NFC is shown in the figure above. Use your phone to touch the NFC area. For Android, open the SoFlow App, connect your scooter, and then touch NFC to lock or unlock it. For iOS, except operating as Android you also need click the notification to lock or unlock your scooter.
2.3. Display
For more information about Navigation, switching between Dark and Light mode
and many other APP features, please scan the following QR code:
https://qrco.de/bdHk9e
2.4. Quick tips to get going
- The controls Use your right hand to operate the throttle and your left hand for the brake and indicators.
- Select mode Switch on and double press the power button twice to select your riding mode on the display.
- Push to start Simply push off the ground, then press the throttle to activate the motor.
copyright by www.soflow.com
2.5. SOFLOW APP
You can connect to your Bluetooth-enabled SOFLOW ONE Pro using the app for iOS and Android devices. This enables you to use your smartphone as a dashboard that displays speed, battery level and predicted range, among other metrics.
2.6. Usage of “Find My” APP for SO ONE Pro
Users of an Iphone are able to connect the scooter with the “Find my” function
to track the location of the scooter.
Important, for all steps below the scooter screen must be on.
Setup your scooter / Add scooter
- Open the “Find My” APP.
- Keep the SO ONE Pro near your Iphone, then tap on + and “add other item”.
- Press the power button on the scooter for 2 sec. to power on the scooter.
- Press the left turning button for 7seconds until you hear a signal tone.
- “SO ONE Pro” will pop up on the Iphone screen, then tap “connect”.
- Enter a name and choose an Emoji, then tap continue.
- Tap “Register item to your Apple ID”, then continue again.
- Tap “Done” to complete the setup.
Learn More – Serial number lookup Press and hold the right turning button and brake lever for 7 seconds until you hear a signal tone, afterwards release both.
How to Disable Press and hold the right turning button 7 seconds until you hear a signal tone, afterwards release the right turning button.
Factory Reset Press and hold the left turning button and brake lever for 7 seconds until you hear a signal tone, afterwards release both.
How to exit «Disable» state Press and hold the left turning button 7 seconds until you hear a signal tone, afterwards release the left turning button.
How to switch between «Nearby», «Separated» and «Disconnect» Nearby Connection Status Disconnected. Separated Nearby status timeout: Reboot (The battery of this device cannot be removed. Reboot is not supported). Disconnect Turn off the Bluetooth on your iPhone.
2.7. Essential care tips & advice
3. Technical data
SoFlow AG
Bionstrasse 4
9015 St. Gallen
Switzerland
EU Vertretung:
SoFlow B.V.
Joop Geesinkweg 901
1114 AB Amsterdam-Duivendrecht
NETHERLANDS
Info@soflow.com /www.soflow.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>