OzSpy HFL1KWCH1 Digital Watch Recorder User Manual

OzSpy HFL1KWCH1 Digital Watch Recorder

(Recording, camera, mobile detection, infrared night vision Watch)

Profile

Indicating lamp status

1. the red light / green light indicates: the 2 points of the wateh clock;
2. blue light indication: 4 points of the clock of the watch.
3. the blue light long light: Video standby state;
4. the green light long light: indicates the recording standby state;
5. green and blue light two lights at the same time long bright: said camera standby state;
6. when charging the red and blue light long light: indicates the state of charge; the red light is out of full.
7. Memory deficiency (no memory card): blue light fash 58 after shutdown.

First operation procedure description

1. Card watch installed memory card (with built-in memory can omit this step): counterclockwise rotation to open the bottom of the watch cover, correctly remove the battery after opening the memory card slot cover, GM will TF card installed in the card slot cover, and then remove the battery properly installed well along the clockwise to tighten the watch bottom cover can be used.
2. Format the memory card (the first time to use the memory card or delete the memory card file use).

First, press and hold the format button to connect the data cable to the charger or computer USB interface, this time the red light long light indicates that it is formatted, and when the green light long light, the format is complete.

Functional operation instructions

Modified time/time watermarking/video resolution operation instructions:

First on the computer new Time.txt electronic documents, and inside are input there is a space between the time/watermark/resolution (pay attention to them), save copied to the U disk root directory, and reboot can modify the set time.

Set description:
2016.01.01 01:01:01 Y 1 2016.01.01 01:01:01 -Modified for current time

• Y—File time watermark display
• N—No time watermark display
• 1—1080P resolving power 1920*1080
• 2—720P resolving powers 1280*720
• 3—VGA resolving powers 640*480

Reset function instructions

For this machine for the combination of key reset, you must press the switch key and boot key, when the machine fails or crash, you can press the two buttons to reset the shutdown.

Charging/video connection PC operating instructions

charging along the red and blue light, full the red light goes out. Data lines will be connected to the machine and the computer PC machine can be connected to the U disk operation, the battery can also be charged at this time.

Problem Resolutions

Maintenance

• Battery: If the watch is not in use for a long time, please have it fully charged before use. For safety, do not put this watch too close to a fireplace or overheated spot
• Operating temperature: 0-40°C. For the extension of battery life, it is better to use it at room temperature.
• Operating humidity: 20% -80%. This product does not have a water resistance function (only waterproof when MIC2 is used). So it can not work in a very humid environment or under water.
• Lens: Do not expose the camera lens directly to strong light such as sunlight so as to avoid damage to optical devices.
• Cleaning: Always use a dry cloth to clean up the glass before the recording. The watch has a transparent cover on the glass for protection, please remove it before using the camera.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>