HT WP14 3-in-1 Wireless Charging Stand User Guide
- June 6, 2024
- HT
Table of Contents
**HT WP14 3-in-1 Wireless Charging Stand User Guide
**
What’s in the Box
-
Wireless charging stand
-
2m 3A charging cable
Features
Compatible with all qi enabled devices
- Aluminum Stand
- Fabric
- Verstyphone charging Stand
- Silicon Pad
- Aluminum Base
- Non Slip Silicon Pads
- Earbuds Phone Charging Pad
- Watch Charging Stand
Dimension
Specification
Model
|
WP14
---|---
Input
| 12V/3A
Output:Stan d|
9V/1.66A(15W)
Output:Pad
| 9V/1.66A~5V/1A(15~5W)
Output:Watch|
5V/0.5A(2.5W)
Dimension
| Base 110mm10mm
Stand 130mm65mm
Weight|
244g
LED indicator
charging status only for pad
Solid red
| Standby
---|---
Flashing red|
Charging
Solid blue
| Fully charged
Flashing red&blue|
FOD
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Instructions
FOD Versatile phone charging stand with dual coil
Smart earbuds charging pad equipped with smart chip for 5W~15W to wirelessly charge earbuds or phone.
This symbol indicates that this product shall not be treated as household
waste.
Instead it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment..
Customer Support
Indoor use
12-Month limited warranty
lifetime technical support
@htaccs
@htaccs
HT Technologies
HT Technologies Co,, Ltd
add: No. 1, Xiangxing West Second Street, Huangsiwei,
Shijie Town, Dongguan City, Guangdong China.
Website: www.htaccs.com
Email: info@htaccs.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>