OzSpy CIHTC4000WF 4K Wi-Fi Trail Camera User Manual

: June 1, 2024
: OzSpy

Table of Contents

Product Overview
Power Switch and SETUP
The instruction of operation keys（Push the switch to SETUP)
Recording mode setting
Photo mode setting
Menu setting
Quick operating instructions
Parameters
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**OzSpy CIHTC4000WF 4K Wi-Fi Trail Camera User Manual

**

Product Overview

Power Switch and SETUP

OFF: The camera power off:
SETUP: The screen will open, you can set the working mode and parameters etc.
ON: Press OK key, waiting 10s, the screen will close, the camera enters infrared detect mode.
Power Switch

Note: First push the switch to SETUP , setting MENU, and push the switch to ON!

The instruction of operation keys（Push the switch to SETUP)

MENU| The screen is open, press the MENU, the left and right keys to translation, theup and down keys to select，the OK key to confirm.
---|---
REPLAY| Press REPLAY to start replay mode，the up and down keys to select，press theOK key to play/pause, and then press Replay to exit.
SHOT| Press SHOT to take / record pictures manually, press SHOT to exit.
MODE| Press MODE to manually switch the photographing / recording mode.
∧| Up
∨| Down
<| Left

| Right
OK| Confirm

Recording mode setting

Video Resolution	4K/2.7K/1080P/720P
Video Length	5s-10Mins
Audio Recording	OFF/ON

Note: The audio recording function is synchronized with the recording, not recorded separately. If you select OFF, there is no sound in the video; Select ON, the video has sound.

Photo mode setting

Photo Quality	60MP/48MP/42MP/36MP/32MP/24MP/20MP/16MP/8MP/4MP/2MP
Photo Burst	1P/2P/3P/4P/5P

Mode	Motion Detection/Time lapse normal/ Time lapse video
Work Time	Off/On
Photo or Video	Photo/Video/Photo + Video
Detection Delay	5s-1Hour
PIR sensitive	Low/Middle/High
Motion Test	Testing PIR trigger function
Fill Light Distance	Near/Middle/Far
Date/time	Set date/time
Date Format	D/M/Y or M/D/Y or Y/M/D
Time Format	24H/12H
Loop Recording	On/Off
Beep Sound	On/Off
Memory card format	Format SD card and delete all data
Language	English/ Russian/Français

/Deutsch/Italiano/Spanish/Chinese/Poland/Japan
Password Protection| Off/On
Factory Reset| Reset to default settings
Version info| Firmware and Bluetooth version number

Quick operating instructions

Install 8pcs AA batteries (Pay a attention to the anode and cathode), and a 4GB~128GB memory card(Please format it before use);.
Push the switch to SETUP, the screen is on, setting menu, mode, parameters, etc;
Push the switch to ON, press ok key, waiting 10s, the screen is going out, the camera will enter infrared detect mode. If it can detect objects, it will take pictures/videos and save them in the memory card. If it does not detect objects, then the camera will enters standby mode.
Push the switch to SETUP, the screen is on, press Replay, it can replay the photo and video files, Press MENU, you can choose to delete photo / video files.
Push the switch to OFF, and camera connect the computer by USB cable, the screen is on, you can browse the photo / video files of the memory card on the computer.
Google Play or APP store to searching APP name Trail Cam Go, or scan these QR code to download the APP software and install it on phone.

(Android QR Code)

(IOS QR Code)

Installed the APP on phone, open the Bluetooth and APP, and add the camera to APP, and settingmenu, review files, download, delete files with APP etc.

Note:

If setting password protection, forget the password, please install the batteries to camera, press UP and OK key at the same time, and push the switch to SETUP, will delete the password.
The camera will auto power off when no any operation after 3mins.