OzSpy HFL1KBOOK Spy Book Hidden Camera User Manual
- June 5, 2024
- OzSpy
Table of Contents
**OzSpy HFL1KBOOK Spy Book Hidden Camera User Manual
**
Picture & Buttons
Technical Data
- Main function: Recording video
- Video format: AVI, 1920*1080 resolution
- Internal memory: NO Memory, supports Micro SD up to 32GB
- USB interface: 2.0 (Hs)
- Charging time: 20 hours
- Battery use time: built-in Lithium ion battery, about 20 hours recording time
- Operation systems: support Windows and Mac OS
Operation
Insert Micro SD Card
Place a Micro SD Card into the Micro SD Card slot until it clicks into place.
Turn on/Record video
Switch the first button to the REC mode, the blue light on, then flashes 3
times and automatically starts recording video.
To stop recording video
Switch the first button to the OFF mode, the blue light flashes once, which
means you have saved the file and the machine turns off.
Motion detection mode
Switch the first button to the MD mode, after the blue light flashes once, the
red light flashes 4 times, which means the machine starts recording video. If
there is no object moves after about 60 seconds in front of the machine, it
will save the file.
Audio on/off
Switch the second button to the ON, which means you can hear the voice of the
video files what you have recorded, switch the second button to the OFF, which
means you can’t hear the voice of the video files what you have recorded.
Reset
In the unusual event that there is an error during operation, and the machine
will not record or function or machine will not switch-off, please reset the
unit by pressing the reset button by inserting a pin into the reset hole to
reset the machine will now be in turn-off mode.
Charging
Connect the machine to a computer via the USB cable and charge it. The yellow
light will stays on while being
charged. When the yellow light turns off, which means the machine is fully
charged. (suggest to switch buttons to the OFF when charging)
Access to file
Connect the machine to computer via USB cable, the yellow light will turn on,
switch the first button to the REC mode, the red and blue light will flash at
the same time, then you can read, edit or delete the recorded files.
Setting time and date
There is a function which will show the video recorder time (year-month-day
hour: minute: second) that can be recorded in the video files and will be
shown when the video files are viewed showing the date and time when recorded.
To set the time correctly:
Connect the machine to computer via USB cable, the yellow light will turn on,
switch the first button to the REC mode, the red and blue light will flash at
the same time, then you can open the file named “YW-TIME”, Put the correct
date and time into the file.
Then save the file, remove the machine from computer.
Attention
When the machine is low on battery when taking video footage, the system will save the video data first and then shut down automatically.
Connecting to the computer: if the machine cannot be recognized by computer, please check the computer system, driver, USB port, USB cable and then reconnect.
We advise for the first 5 times of usage, to charge the battery fully after the battery is completely dead, so that the battery can work to its maximum performance over its life.