INFINITY IT-9810 Massage Chair User Guide

: September 2, 2024
: Infinity

Table of Contents

INFINITY IT-9810 Massage Chair
Product Information
Product Usage Instructions
Frequently Asked Questions
In-Use Screen
Auto Programs
ZONE
Massage Time
Manual Controls
Product Overview
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)
infinitymassagechairs

INFINITY IT-9810 Massage Chair

INFINITY-IT-9810-Massage-Chair-product

Product Information

Specifications:

Model: IT-9810
Massage Chair
Timer Range: 5 to 30 minutes
Auto Programs: RELAX / HEALTH CARE / WELLBEING
Massage Zones: Shoulder, Back, Waist, Point, Partial, Full

Product Usage Instructions

In-Use Screen:

After selecting a Massage program, the In-use screen displays all settings for that program including Speed, Timer, Intensity, Width, and Massage Range.

Auto Programs:

The chair features 3 built-in Auto Programs – RELAX, HEALTH CARE, and WELLBEING. Press the corresponding button to turn on/off the desired Auto Program. The chair will scan your body and activate combinations of massage functions automatically.

Zone Selection:

Press ‘Zone up/down’ buttons to toggle between massage zones: Shoulder, Back, Waist, Point, Partial, Full. Adjust the massage location based on your preference.

Massage Time:

The preset massage time is 15 minutes. Add time using the Timer button in 5-minute increments. The LCD screen will display the countdown.

Manual Controls:

Adjust the massage intensity, speed, and width using the corresponding adjustment buttons. Customize your massage experience based on your needs.

Frequently Asked Questions

Q: How do I turn on/off the chair?
- A: Press the Power (Start/Stop) button to turn on/off the chair.
Q: How can I adjust the massage time?
- A: Press the Timer button to set the massage time from 5 to 30 minutes in 5-minute increments.
Q: How do I select different massage zones?
- A: Use the Zone up/down buttons to toggle between Shoulder, Back, Waist, Point, Partial, and Full massage zones.

In-Use Screen

After a Massage program is selected, the In-use screen displays all the settings to that program.

TIMER
SPEED
1. AIR MASSAGE (Seat, Calf)
INTENSITY
WIDTH
MASSAGE RANGE

Auto Programs

The chair features 3 built-in Auto Programs, while using the auto program the chair will switch automatically and activate combinations of massage functions.
Auto Program: RELAX / HEALTH CARE / WELLBEING
Press the corresponding button to turn on/off the desired Auto Program. Once selected, the chair will automatically begin scanning your body, mapping your back, shoulders, and neck. During this process it is important to remain seated back into the chair without lifting your head. All auto massage programs switch width and speed automatically.

ZONE

Press the ‘Zone up/down’ buttons to toggle between massage zones: Shoulder, Back, Waist, Point, Partial, Full. Pressing UP button, moves through the options counterclockwise. Pressing the DOWN button, moves through the options clockwise:

Shoulder massages the shoulders only.
Back massages the midback only.
Waist massages the lower back only.
Point stops the massage mechanism in its current position.
Partial travels a few inches above and below the current position.
Full travels the entire length of the massage track.

Partial and Point locations can be fine-tuned using the massage zone adjust up/down buttons.

Note: ‘point’ massage zone can’t be selected while in Shiatsu massage mode.

Massage Time

The preset massage time is 15 minutes. You can add time to your massage by using the Timer button. Each press adds 5 mins to the massage time. The LCD screen will show a countdown.

Manual Controls

Press the manual control button to toggle between ALL massage modes. Modes will occur in the following order: Reverse Kneading → Kneading → Shiatsu → Tapping → Duplex → Reverse Duplex. The selected massage function pattern will be displayed on the screen. In addition to different massage modes, you also have the ability to tailor your massage to your exact needs. Use the Intensity adjustment button to control the intensity of your massage. Adjust the speed of your massage by using the Speed adjustment button. Control the width of the back massage rollers by using the Width adjustment button. Add air massage to your massage experience by using the All air button or select individual air massage zones by using the Calf/Seat air massage button.

Share a photo and tag us