VINGLI MODULAR SOFA L-Shaped Sectional Couch Sofa Instruction Manual

VINGLI MODULAR SOFA L-Shaped Sectional Couch Sofa

Product Specifications

• Material: Metal backrest frame
• Design: Curved bottom
• Installation: Upper or lower screws to be installed first for all back frames

Product Usage Instructions

Assembly

1. Ensure all parts are included in the package.
2. Start by laying out the metal backrest frame pieces.
3. Adhere to installing either the upper or lower screws first for all backframes to prevent misalignment.
4. Tighten the screws evenly to ensure stability.

Cushion Installation

1. Once the frame is assembled, proceed with opening the vacuum cushions.

2. Place the cushions on the frame according to the provided instructions or design layout.

3. Ensure a snug fit for each cushion to maintain comfort and aesthetics.

Frequently Asked Questions

Q: Why is the bottom of the metal backrest frame curved?

A: The curved design is intentional and normal for this product.

Q: How can I prevent misalignment during installation?

A: Install either the upper or lower screws first for all backframes and ensure they are tightened evenly.

Q: Can I open the vacuum cushions right away?

A: If you have no concerns regarding size, stability, or color, you can proceed with opening the vacuum cushions.

MODULAR SOFA

• A CARTON A
  • Single Seat + Ottoman Module
• B CARTON B
  • Single Seat + Armrest Module
• C CARTON C
  • Single Seat Module
• Pis open vacuum-sealed packages lastly! Pis read the notice below carefully

Extremely Important Notice Before Assemly

1. Vacuum-sealed Cushions once opened will lead to ineligible return conditions as the return shall be processed in original boxes;
2. Pis have the frame not involving compressed parts set up first to see if it is stable/color/size meets your demand;
3. For any damages or structure issues, you’re highly recommended to reach out to us with pictures offered;
4. For reporting missed parts, please clarify us the part number complies with the manual to speed up the communication phase;
5. Don’t secure the screws to a 100% degree until you have aligned up all the holes successfully. Misalignment will lead to failure in the sofa’s stability.

PRE-ASSEMBLY INFORMATION

Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.

NOTICE

• Please keep this manual and hand it over when you transfer the product.
• Please read the following instructions carefully and use the product accordingly.
• This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed.
• Please do not exceed the weight limitations of this item.
• Do not stand on or use any part of this item as a step ladder.
• Pis check the completeness and eligible condition of all the numbered parts before your assembly.
• Please assemble the item in a spacious room and do not place the unwrapped product directly on the ground to avoid damage.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the product warranty.
• Periodically inspect screw tightness while the product is in use. If necessary, retighten to ensure structural integrity.
• To avoid the potential dangers of suffocation, please keep all parts and packaging (films, plastic bags foam, etc.) away from children and pets.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
• Do not expose the product to direct sunlight exposure or rain, and do not put it in a humid place. Failure to do so may accelerate the distortion or discoloration.
• TWO PERSON ASSEMBLY
• UP TO 45 MINUTES FOR ASSEMBLY
• WEIGHT LIMITATION: 380LBS/PER SEAT

IMPORTANT

1. Do not tighten bolts/ screws completely until all bolts/ screws are lined up and inserted into holes.
2. Do not over-tighten screws and bolts to avoid stripping.
3. Please use hand tools to assemble this product. If you’re using power tools, remember to set the tool to low torque to avoid damage.

COMPONENTS-CARTON A

ASSEMBLY STEPS-CARTON A

1. step 1: Screws in Legs (M and Gaskets (L) to the Seat and Ottoman. (seat is(A)and Ottoman is (C.).
2. step2: Insert the Backrest D into the seating frame A, Align the holes first, then attach the bolts(0)& Washers(N) to secure the connection between A and D.
   • Warm Reminder: The bottom of the metal backrest frame in a curved design is normal. To avoid misalignment between different backtraces, adhere to installing either the upper or lower screws first for all of them. Misalignment can occur if the upper screws are secured looser than the lower ones or vice versa on either one of them.
3. step3: Always open last for the vacuum-sealed Cushions.
4. If you confirm there are no issues with the structure’s stability/damages/ color discrepancy/cloth quality/size/parts completeness, then you could go ahead to have the cushions expanded and placed.
5. Pls, be reminded that opened vacuum-sealed Cushions will cause a failure on return.
6. Be careful when you are using scissors to cut down the compressed bags.

  * It might take up to 2-7 days to have cushions fully expended. Please kindly be patient.

4. step 4: Place the cushions on the sofa.

COMPONENTS-CARTON B

ASSEMBLY STEPS-CARTON B

1. step 1: Screws in Legs (M) and Gaskets (L) to the Armrests.
2. step2: ConnectE&F) and Seat frame(A) with Bolts(0) and Washers(N).
   • The bottom of the metal backrest frame in a curved design is normal.
3. step 3: Insert the Backrest D into the seating frame A, Align the holes first, then attach the bolts(O)& Washers(N) to secure the connection between A and D.
   • Warm Reminder: 1 The bottom of the metal backrest frame in a curved design is normal. 2 To avoid misalignment between different backframes, adhere to installing either the upper or lower screws first for all of them. Misalignment can occur if the upper screws are secured looser than the lower ones or vice versa on either one of them.
4. step 4: Always open last for the vacuum-sealed Cushions!!!
5. If you confirm there are no issues with the structure’s stability/damages/color discrepancy/cloth quality/size/parts completeness, then you could go ahead to have the cushions expanded and placed.
6. Pls, be reminded that opened vacuum-sealed Cushions will cause a failure on return.
7. Be careful when you are using Scissors to cut down the compressed bags. It might take up to 2-7 days to have cushions fully expended. Please kindly be patient.
8. step 5: Attach arm pillows(J&K) into designated position.
9. Step 6: Place the cushions on the sofa.

COMPONENTS-CARTON C

ASSEMBLY STEPS-CARTON C

1. step 1: Screws in Legs (M) and Gaskets (L) to the Seat.
2. step 2: Insert the Backrest D into the seating frame A, Align the holes first, then attach the bolts(O)& Washers(N) to secure the connection between A and D.
   • Warm Reminder: 1 The bottom of the metal backrest frame in a curved design is normal. 2 To avoid misalignment between different backframes, adhere to installing either the upper or lower screws first for all of them. Misalignment can occur if the upper screws are secured looser than the lower ones or vice versa on either one of them.
3. step 3: Always open last for the vacuum-sealed Cushions.!
4. If you confirm there are no issues with the structure’s stability/damages/color discrepancy/cloth quality/size/parts completeness, then you could go ahead to have the cushions expanded and placed.
5. Pls, be reminded that opened vacuum-sealed Cushions will cause a failure on return.
6. Be careful when you are using scissors to cut down the compressed bags. It might take up to 2-7 days to have cushions fully expended. Please kindly be patient.
7. step 4: Place the cushions on the sofa.

FREE COMBINATION

Step 4: Don’t open the vacuum-sealed packages, always set the frame first!

1. Connecting Armrests to seat frame A with Bolts O and washers N.
2. Secure the connection of two seat frames A with the longer Bolts P, Washer N, and Butterfly nuts Q; Align first, then secure tightly.
3. If you have no problems with the size/sofa frame stability/color discrepancy, then please go ahead with opening the vacuum cushions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>