VINGLI G57000308 8FT Heavy Duty Metal Windmill Instruction Manual
- June 13, 2024
- VINGLI
Table of Contents
VINGLI G57000308 8FT Heavy Duty Metal Windmill
VINGLI 8FT WINDMILL
Product Information
Thank you for choosing VINGLI! The VINGLI 8FT Windmill is a durable and
efficient wind-powered device designed to add a touch of elegance and
functionality to your outdoor space. This windmill is easy to assemble and
comes with all the necessary components for installation.The package includes:
- A – Corner Leg (28) x 4
- A1 – Corner Leg (29-1/4) x 4
- A2 – Corner Leg (29-1/4) x 4
- B – Wheel x 1
- B1 – Rudder x 1
- B2 – Lower Brace (19-1/2) x 4
- C – Tiller x 2
- D – Linker x 1
- E – Master Head x 1
- F – Platform x 1
- G – Ground Stake x 4
- Big Washer (C1,C2,C3)
- Small Washer (D1,D2,D3,D4)
- Bolt and Screw Cap x 41
Assembly Instructions
Wheel Installation:
- Connect B, C, and D.
- Attach the wheel to the linker.
- Fold the pin after inserting it to prevent the wheel from slipping off.
- Remember to place the big washers (C1, C2, C3) as shown below.
Body Installation:
- Connect E, A1, and A2.
- Install F, remember to screw F with a B1 together on A1, and repeat it on all 4 sides.
- Remember to place small washers (D1, D2, D3, D4) as shown below.
- Screw the center of B1 to A2 on all 4 sides, following the pattern below.
- Install the rest of the parts and remember to screw B2 with a B1 together on A3 for a finished look.
If you have any issues or concerns during the assembly process,please feel free to contact us via support@vingli.com or visit our website at www.vingli.com.
Thank you for choosing VINGLI
This assembly process takes 60mins approximately for 2 people
Any issue or concern, welcome to contact us via
support@vingli.com
Or visit us on www.vingli.com
Package includes
| A | Wheel x 1 | D | Rudder x 1 |
|---|---|---|---|
| B | Linker x 1 | E | Master Head x 1 |
| C | Tiller x 2 | F | Platform x 1 |
| A1 | Corner Leg (28”) x 4 | __ |
__
A2| Corner Leg (29-1/4”) x 4
A3| Corner Leg (29-1/4”) x 4
B1| Side Brace Set x 4|
B2| Lower Brace (19-1/2”) x 4| __
G| Ground Stake x 4| Big Washer (C1,C2,C3)
Small Washer (D1,D2,D3,D4) Bolt and Screw Cap x 41
Wheel Installation
1. Connect B, C, and D.
__
__
| 2. Attach wheel to the linker. Remember to place big washers (C1,C2,C3) as shown below.
__
| 3. Fold the pin after insert it to prevent the wheel from slipping off.
__
__
__
__
---|---|---
Body Installation
- Connect E, A1, and A2, remember to to place small washer (D1,D2,D3,D4) as shown below.
- Install F, remember to screw F with a B1 together on A1, and repeat it on 4 sides.
- Screw the center of B1 to A2 on 4 sides, following the pattern below, install the rest parts; remember to screw B2 with a B1 together on A3
- Finish look.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>