VINGLI G52000716 3 Piece Dining Room Table Set Instruction Manual
- June 11, 2024
- VINGLI
Table of Contents
G52000716 3 Piece Dining Room Table Set
Instruction Manual
G52000716 3 Piece Dining Room Table Set
THANKS FOR YOUR PURCHASE! WE DO OUR BEST TO INSURE THAT YOUR FURNITURE ARRIVES
IN EXCELLENT CONDITION. IN THE EVENT THAT A PART IS DAMAGED OR MISSING, WE
WILL BE HAPPY TO PROVIDE YOU WITH REPLACEMENT PARTS, AT NO CHARGE, WITHIN 30
DAYS OF PURCHASE.IF YOU NEED ASSISTANCE WITH ASSEMBLY OR REPLACEMENT
PARTS,PLEASE CONTACT US AT support@vingli.com
PLEASE ATTACH YOUR USER NAME OR ORDER ID SO THAT WE CAN ASSIST YOU BETTER.
IMPORTANT:PLEASE READ ALL THE INSTRUCTIONS BEFORE STARTING ASSEMBLY.
Assembly Instruction
When unpacking, please be careful not to discard any parts with the packaging. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present. If hardware is missing or you have difficulty in assembling this product, please contact us at your earliest convenience.
Overview
Before assembling, please make sure you have the above parts. This Dining Table and Chair has several parts and may require 2 people to assemble. To give you an overview of all parts, the following picture is to help you put the various parts into perspective. Please read through the instructions below to familiarize yourself with the parts and steps before assembly.
Installation Steps
| Step 1:Attach Supporting Bars‘4: and Wine Rack:3: to Table
Legs’2! with Screw B and Alley Key. Do not fully tighten each screw after you
put in, after you attach all the screws, tighten them back and forth to make
sure the legs are even.
---|---
| Step 2:Place the tabletop on a clean and smooth surface to avoid the table
from being scratched. Attach frame(from step 1) to Table Top‘! with Screw B
and Allen Key. Inspect and make sure all parts are connected, then the dining
table is ready to use.
| Step 3:Place Chair Leg’8! on Chair Leg ‘9:,attach Chair Back
Part’7! to legs with Screw A and Allen Key.
| Step 4:Attach Chair Seat to the frame(from step 3) with Screw B and Allen
Key.
| Step 5:Attach Chair Back Part’6: to frame(from step 4) with Screw A and
Allen Key.
Caution: If the table or chair wobbles, loosen the parts and try to
assemble again. Our table and chairs can only be used on a flat, level
surface. For better use, we may advise you tighten all the screws every few
months.
If you are satisfied with our product, share your shopping experience with
your friends and families. For any questions or feedbacks, please email us
with your Order ID at support@vingli.com,we are
always striving to improve.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>