Lowe s 67826892 Wooden Chandeliers Instruction Manual
- August 31, 2024
- Lowe s
Table of Contents
Lowe s 67826892 Wooden Chandeliers
Product Information
Specifications
- Voltage: 110-120V
- Bulb Socket: E12 Base
- Wattage: Max 40W x 6
- Bulb Type: LED/Halogen/Incandescent
- Certification: Bulb Socket(s) is ULListed
- Warranty: 2 Years
Package List
- Light Fixture with Bulb Holders – 1
- Wooden Legs with Screws – 6
- Hubs – 2
- Canopy & Chain – 1
- Wooden Caps – 2
- Instruction & Pack of Hardware – 1
Product Usage Instructions
- Pre-installation Check: Inspect each part before installation.
- Power Supply: Turn off the power supply in your home before hard-wiring the chandelier.
- Environment: Use the product in a dry environment only.
If you encounter any questions or issues during installation or use, please reach out to us directly for prompt support and resolution.
If you have any questions , please contact us directly for a faster and better solution .
A LETTER TO MY PRECIOUS CUSTOMER
Dear Customer,
Thanks for choosing this lamp! To save your time and effort, please try to
light up the lamp before installation to ensure the sockets are working
correctly. If you have any issue when you receive it, please contact us .
Thank you for your support!
- Customer Support Team
ATTENTION
- Please check each part before installation.
- Please turn off the power supply in your home before hard-wiring it.
- Please use this product in a dry environment.
QUESTION & ANSWER
Q: After powering on, my lamp doesn’t work. What should I do?
A: First, make sure your bulbs are working well. If your bulbs work, you
need to check if the wires are connected incorrectly.
If you can’t find the reason, please contact us and we will try our best to solve it for you.
INFORMATION AND PACKAGE
Specification
Voltage| 110- 120V
Bulb Socket| E12 Base
Wattage| Max 40W x 6
Bulb Type| LED/Halogen/Incandescent
Certification| Bulb Socket(s) is UL Listed
Warranty| 2 Years
Package List
Light Fixture with Bulb Holders| 1
Wooden Legs with Screws| 6
Hubs| 2
Canopy & Chain| 1
Wooden Caps| 2
Instruction & Pack of Hardware| 1
Installation Steps
Installation Steps Description
-
Twist the pole to the light fixture.
-
Unscrew the screws from the wooden legs and then use these screws to secure the legs and the upper and lower hub.
-
Place the wood lid on the canopy and secure it with a lifting ring.
-
Pass the ball-shaped tooth rod through the piece of wood, fasten it with a nut,and screw it into the Canopy.
-
Make the cord through the chain and the canopy. And then clip the chain to the light fixture and the ring cap.
-
Connect the “L” wire to your “live” wire through the orange terminal caps and the “N” wire to your “neutral” wire, the copper wire needs to be wrapped around the green screw or connect to your earth wire.
-
Attach the metal bracket to your junction box with Phillips head screws.
(Anchor screws are only useful for those customers who do not have a junction box). -
Use the ring cap to fix the light fixture with the metal bracket.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>