Ashland Insect Irradiation Indicator Instruction Manual
- August 14, 2024
- Ashland
Table of Contents
sterin™ insect irradiation indicator
instructions for use
Sterin™ insect irradiation indicators are designed to provide independent quality assurance for the Sterile Insect Technique (SIT) by providing positive, visual verification of irradiation at the minimum specified dose.
Storage instructions
- store at or below 25°C (77°F)
- avoid prolonged exposure to light (sunlight, UV)
- keep away from radiation sources
Use instructions
- Do not expose to >50°C. Avoid prolonged exposure to elevated temperature. Check bottom left temperature indicator before using. Do not use if the temperature indicator is BLACK.
- Pull the clear strip to dispense one sterin™ indicator from the dispenser box. This will expose the adhesive on the front side of the indicator.
- Check sterin™ indicator to confirm that it displays the visual message “NOT IRRADIATED”. Do not use indicator if the word “NOT” is not visible.
- Holding the sterin™ indicator by the edges, adhere the indicator to the inside of a “see-through” container so that the printed side of the indicator faces out.
- Irradiate the container with the attached sterin™ indicator to the dose required for the product. The exposure dose should be equal to or larger than the minimum dose printed on the Sterin™ indicator (e.g. 70 Gy, 100 Gy, 125 Gy, 145 Gy).
- After exposure, inspect the radiation-sensitive film in the center of the indicator to confirm that it is fully opaque, covering the word “NOT” so that the indicator displays the visual message “IRRADIATED”.
Examples of sterin™ indicators before and after irradiation are illustrated below.
Manufactured for:
Ashland Specialty Ingredients G.P.
1005 Rt. 202/206
Bridgewater, NJ 08807 USA
Scan for translations or visit ashland.com/sterin
| Symbol | Symbol title |
|---|---|
| product code | |
| batch code | |
| use-by date | |
| manufacturer | |
| do not re-use | |
| do not use if package is damaged |
NOTE: Sterin™ insect irradiation indicators only indicate that irradiation has occurred in conjunction with Sterile Insect Technique (SIT). They must only be used with irradiators that are working properly and are properly calibrated. However, becasue of variations in the lighting conditions, product batches, and user eyesight, Sterin™ indicators may appear fully opaque even after exposure to less than the minimum does for the product. Therefore, Sterin™ indicators should never be used to calibrate an irradiator.
Domestic orders and inquiries
DFOrdersNA@Ashland.com
International orders and inquiries
DiagnosticFilmOrders@Ashland.com
ashland.com/contact
® Registered trademark, Ashland or its subsidiaries, registered in various
countries™ Trademark, Ashland or its subsidiaries, registered in various
countries
© 2024, Ashland / PHA23-113
The information contained in this document is intended for use only by persons having technical skill and at their own discretion and risk. All statements, information and data presented herein are believed to be accurate and reliable, but are not to be taken as a guarantee, an express warranty, or an implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which Ashland and its subsidiaries assume legal responsibility. Certain end uses of our products may be regulated pursuant to rules governing medical devices and any other non-medical device end use applications. A purchaser must make its own determination of our products’ suitability for purchaser’s use, whether alone or in conjunction with other products, the protection of the environment, and the health and safety of its employees and customers. It is also the purchaser’s responsibility to comply with all applicable legal and regulatory requirements (including those governing medical devices and/or any non-medical devices). We make no warranty against infringement of any patents by reason of purchaser’s use of any of our products.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>