Russell Hobbs 21350-56 Cool Stand Mixer Instruction Manual

: June 15, 2024
: Russell Hobbs

Table of Contents

Russell Hobbs 21350-56 Cool Stand Mixer
Product Information
Product Usage Instructions
IMPORTANT SAFEGUARDS
PRODUCT DIAGRAMS
BEFORE USING FOR THE FIRST TIME
USING YOUR MIX & GO
USING THE COOLING TUBE
CARE AND MAINTENANCE
RECYCLING
Recipes
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Russell Hobbs 21350-56 Cool Stand Mixer

Russell-Hobbs-21350-56-Cool-Stand-Mixer-product

Product Information

Specifications:

Model: 21350-56
Capacity: 600ml

Important Safety Information:
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised/instructed and understand the hazards involved. Children must not use or play with the appliance. Keep the appliance and cable out of reach of children. Always disconnect the appliance from the mains supply socket if it is left unattended and before assembling, disassembling, or cleaning. Misuse of the appliance may cause injury. If the cable is damaged, it must be replaced by the manufacturer, its service agent, or someone similarly qualified, to avoid hazard. Care must be taken when handling sharp cutting blades during emptying and cleaning. Never process hot or boiling liquids. Allow them to cool before processing.

Do not use this appliance near bathtubs, showers, basins, or other vessels containing water. Don’t operate the appliance if it’s damaged or malfunctions. Don’t run the motor for more than 1 minute, or it may overheat. After 1 minute, switch off for at least 2 minutes, to let the motor cool.

Household Use Only

Diagrams:

Bottle
Seal
Blade unit
Motor unit
Lid
Cooling tube

Product Usage Instructions

Before Using for the First Time:
Clean the appliance before using it for the first time.

Using Your Mix & Go:

Sit the motor unit on a dry, firm, level surface.
Put the plug into the power socket.
Add the ingredients to the bottle then screw on the blade unit. Don’t fill past 600ml.
Turn the bottle upside down.
Align “d” on the bottle with “u” on the motor unit.
Lower the blade unit into the motor unit.
Press the bottle down to run the motor. Release it to stop the engine.
For hands-free operation, turn the bottle left to run the motor (FIG A), then back, to stop.
Once finished, lift the bottle off the motor unit, turn it upright, unscrew the blade unit then screw the lid onto of the bottle.
Flip the cap on the lid open to pour, and press it closed to store.

Using the Cooling Tube:
The cooling tube helps to keep your drink cooler and fresher for longer.

Open the cooling tube screw cap and fill the tube with water to the MAX mark on the tube.
Replace the screw cap.
Place the cooling tube in the freezer (or freezer compartment of your fridge) until the water inside has frozen.
Once frozen, screw the cooling tube into the underside of the lid (FIG B).
Follow the previous instructions to make your drink and once made, fit the lid and cooling tube to the bottle.
Remember, when using the cooling tube only fill the bottle up to the cooling tube MAX marking.

Care and Maintenance:
To avoid environmental and health problems due to hazardous substances, appliances and rechargeable and non-rechargeable batteries marked with one of these symbols must not be disposed of with unsorted municipal waste. Always dispose of electrical and electronic products and, where applicable, rechargeable and non-rechargeable batteries, at an appropriate official recycling/collection point.

FAQ

Q: Can I use this appliance near water?
A: No, do not use this appliance near bathtubs, showers, basins, or other vessels containing water.
Q: Can children use this appliance?
A: No, children must not use or play with the appliance. Keep the appliance and cable out of reach of children.
Q: Can I process hot liquids with this appliance?
A: No, never process hot or boiling liquids. Allow them to cool before processing.
Q: How do I clean the appliance?
A: Clean the appliance before using it for the first time. Refer to the user manual for detailed cleaning instructions.

Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:

This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised/instructed and understand the hazards involved.
Children must not use or play with the appliance. Keep the appliance and cable out of reach of children.
Always disconnect the appliance from the mains supply socket if it is left unattended and before assembling, disassembling or cleaning.
Misuse of the appliance may cause injury.
If the cable is damaged, it must be replaced by the manufacturer, its service agent, or someone similarly qualified, to avoid hazard.
Care must be taken when handling sharp cutting blades during emptying and cleaning.
Never process hot or boiling liquids. Allow them to cool before processing. Do not add hot liquid (over 40°C), as it may be ejected due to sudden steaming.
Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
Don’t use accessories or attachments other than those we supply.
Don’t use this appliance for any purpose other than making smoothies.
Don’t operate the appliance if it’s damaged or malfunctions.
Don’t run the motor for more than 1 minute, or it may overheat. After 1 minute, switch off for at least 2 minutes, to let the motor cool.

PRODUCT DIAGRAMS

Bottle
Seal
Blade unit
Motor unit
Lid
Cooling tube
Dishwasher – top rack

BEFORE USING FOR THE FIRST TIME

Clean the appliance before using it for the first time.

USING YOUR MIX & GO

Sit the motor unit on a dry, firm, level surface.
Put the plug into the power socket.
Add the ingredients to the bottle then screw on the blade unit. Don’t fill past 600ml.
Turn the bottle upside down.
Align the bottle with the motor unit.
Lower the blade unit into the motor unit.
Press the bottle down to run the motor. Release it to stop the motor.
For “hands-free” operation, turn the bottle left to run the motor (FIG A), then back, to stop.
Once finished, lift the bottle off the motor unit, turn it upright, unscrew the blade unit then screw the lid onto of the bottle.
Flip the cap on the lid open to pour, and press it closed to store.

USING THE COOLING TUBE

The cooling tube helps to keep your drink cooler and fresher for longer.

Open the cooling tube screw cap and fill the tube with water to the MAX mark on the tube.
Replace the screw cap.
Place the cooling tube in the freezer (or freezer compartment of your fridge) until the water inside has frozen.
Once frozen, screw the cooling tube into the underside of the lid (FIG B)
Follow the previous instructions to make your drink and once made, fit the lid and cooling tube to the bottle. Remember, when using the cooling tube only fill the bottle up to the cooling tube MAX MAX marking ( ).

CARE AND MAINTENANCE

Unplug the appliance.
Wipe the motor unit with a damp cloth.
Remove the seal with something blunt, like the handle of a fork.
Hand wash the removable parts.
Press the seal back into place with something blunt, like the handle of a fork.
- You may wash these parts in the top rack of a dishwasher.

If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface finishes. The damage should be cosmetic only, and should not affect the operation of the appliance.

RECYCLING

To avoid environmental and health problems due to hazardous substances, appliances and rechargeable and non-rechargeable batteries marked with one of these symbols must not be disposed of with unsorted municipal waste. Always dispose of electrical and electronic products and, where applicable, rechargeable and non-rechargeable batteries, at an appropriate official recycling/collection point.