Body-Solid PFI150 Flat Incline Bench User Manual

: August 31, 2024
: Body-Solid

Table of Contents

Body-Solid PFI150 Flat Incline Bench User Manual
PREPARATION
Installation Requirements
Assembly Tips
PART LIST
HARDWARE ILLUSTRATION
EXPLODED VIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Body-Solid PFI150 Flat Incline Bench User Manual

TO RENS LESSA, YOU EUST TOO THE NO SE THIS TYPE OF EQUIPMENT.

Inspect equipment before each workout. Check that all nuts, bolts, screws, and pop pins are in place and fully tightened. Also, before use, check cables for signs of wear.
Replace all worn parts immediately. Never use the machine if any parts are damaged or missing. FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY.
Keep clear of the cables and all moving parts when the machine is in use.
Always make sure all Snap Links are closed when doing any cable/pulley/strap exercises.
Exercise with care. Perform your exercises at a smooth moderate pace; never perform jerky or uncoordinated movements that may cause injury.
It is recommended that you should work out with a training partner.
Do not allow children or minors to play on or around this equipment.
If unsure of the proper use of equipment, call your local Body-Solid distributor or the Body-Solid customer service department at 1-800-556-3113.
WARNING: Consult your physician before starting your exercise program. For your own safety, do not begin any exercise program without proper instruction. RAL8-6-03 WC-54

SAFETY INSTRUCTIONS
When using exercise equipment, you should always take basic precautions including the following:

Read all instructions before using the PFI150. These instructions are written to ensure your safety and to protect the unit.
Do not remove any safety labels from the machine.
Do not allow children on or near the equipment.
Use the equipment only for its intended purpose as described in this guide. Do not use accessory attachments that are not recommended by the manufacturer. Such attachments might cause serious injuries.
Wear proper exercise clothing and shoes for your workout, no loose clothing.
Keep hands, limbs, loose clothing, and long hair well out of the way of all moving parts
Use care when getting on or off the unit.
Do not overexert yourself or work to exhaustion.
If you feel any pain or abnormal symptoms, stop your workout immediately and consult your physician.
Never operate the unit when it has been dropped or damaged. Return the equipment to a service center for examination and repair.
Never drop or insert objects into any opening in the equipment.
Always check the unit and its cables before each use. Make sure that all fasteners and cables are secure and in good working condition.
Do not use the equipment outdoors or near water.

Personal Safety During Assembly

Before beginning assembly, please take the time to read the instructions thoroughly.
Read each step in the assembly instructions and follow the steps in sequence. Do not skip ahead. If you skip ahead, you may learn later that you have to disassemble components and that you may have damaged the equipment
Assemble and operate the PFI150 on a solid, level surface. Locate the unit a few feet from the walls or furniture to provide easy access.
The PFI150 is designed for your enjoyment. By following these precautions and using common sense, you will have many safe and pleasurable hours of healthful exercise with your Powerline Flat Incline Bench.
After assembly, you should check all functions to ensure correct operation. If you experience problems, first recheck the assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call the dealer from whom you purchased the machine or call 1-800-556-3113 for the dealer nearest you.

Obtaining Service
Please use this Owner’s Manual to make sure that all parts have been included in your shipment. When ordering parts, you must use the part number and description from this Owner’s Manual. Use only Powerline by Body-Solid replacement parts when servicing this machine. Failure to do so will void your warranty and could result in personal injury. For information about product operation or service, check out the official Powerline website at www.bodysolid.com or contact an authorized Powerline dealer or a Powerline factory-authorized service company or contact Body-Solid customer service at one of the following:

Toll Free: 1-800-556-3113
Phone: 1-708-427-3555
Fax: 1-708-427-3556
Email: service@bodysolid.com
Or write to Body-Solid, Inc.

Service Department
1900 S. Des Plaines Ave.
Forest Park, IL 60130 USA

Retain this Owner’s Manual for furture reference. Part numbers are required when ordering parts.

PREPARATION

Required tools
The basic tools that you must obtain before assembling the PFI150 include but are not limited to:

Standard Wrench Set
Metric Wrench Set
Adjustable Wrench
Standard / Metric Allen Key Set

Installation Requirements

Follow these installation requirements when assembling the PFI150: Set up the PFI150 on a solid, flat surface. A smooth, flat surface under the machine helps keep it level. Provide ample space around the machine. Open space around the machine allows for easier access. For aesthetic purposes, insert all bolts in the same direction unless specified (in text or illustrations) to do otherwise. Leave room for adjustments. Tighten fasteners such as bolts, nuts, and screws so the unit is stable, but leave room for adjustments. Do not fully tighten fasteners until instructed in the assembly steps to do so. Fill out and mail the warranty card.

Ordering Replacement Parts
If you need to order replacement parts please be prepared to provide the following information when contacting us so that we can assist you better.

Model Number
Place of Purchase
Serial Number (S/N)
Part # and Description

Assembly Tips

Read all “Notes” on each page before beginning each step. While you may be able to assemble the PFI150 using the illustrations only, important safety notes and other tips may be included in the text. Some pieces may have extra holes that you will not use. Use
only those holes indicated in the instructions and illustrations.
NOTE: With so many assembled parts, proper alignment, and adjustment are critical. While tightening the nuts and bolts, be sure to leave room for adjustments.
NOTE: The bottles that are marked “Poison” are your touch-up paint. Keep away from children.
CAUTION: Obtain assistance! If you feel like you can’t assemble the PFI150 by yourself then do not attempt to do so as this could result in injury. Review the Installation Requirements before proceeding with the following steps.

PART LIST

HARDWARE ILLUSTRATION

STEP 1
BE CAREFUL TO ASSEMBLE ALL COMPONENTS IN THE SEQUENCE THAT THEY ARE PRESENTED.

NOTE
finger tighten all hardware FIRST. wrench tighten all hardware at the END of step 1A. some components may be pre-assembled. nylon lock nuts will not fully screw onto bolts, must wrench tighten.

1A. attach Rear Stabilizer (B) to Main Frame (A) using:

2 – (#4) m10x95mm hex head bolt
4 – (#10) m10 washer
2 – (#14) m10 nylon lock nut

1B. attach Transport Wheels (#16) to Rear Stabilizer (B) using:

2 – (#6) m8x45mm hex head bolt
4 – (#11) m8 washer
2 – (#15) m8 nylon lock nut

STEP 2
BE CAREFUL TO ASSEMBLE ALL COMPONENTS IN THE SEQUENCE THAT THEY ARE PRESENTED.

NOTE
finger tighten all hardware FIRST. wrench tighten all hardware at the END of step 2B. some components may be pre-assembled. nylon lock nuts will not fully screw onto bolts, must wrench tighten.

2A. attach Seat Support Frame (E) to Seat Frame (C) using:

1 – (#1) m12x130mm hex head bolt
2 – (#8) m12 washer
1 – (#13) m12 nylon lock nut
2B. attach Back Support Frame (F) to Back Frame (D) using:
1 – (#2) m12x120mm hex head bolt
2 – (#8) m12 washer
1 – (#13) m12 nylon lock nut

STEP 3
BE CAREFUL TO ASSEMBLE ALL COMPONENTS IN THE SEQUENCE THAT THEY ARE PRESENTED.

NOTE
finger tighten all hardware FIRST. wrench tighten all hardware at the END of step 3B. some components may be pre-assembled. nylon lock nuts will not fully screw onto bolts, must wrench tighten.

3A. attach Seat Pad (#18) to Seat Frame (C) using: