DIRTLOGIC SHOCKS FT82083 Dirt Logic Shocks Instruction Manual

DIRTLOGIC SHOCKS FT82083 Dirt Logic Shocks

Specifications

• Product Name: Dirt Logic Shocks
• Model Numbers: FTS22361, FT82083D, FT82083P, FT70239, FT82083i, FT86127
• Compatibility: FORD BRONCO 2.25 DLSS RESI (FRONT), 2.5 DLSS C/O W/RESI (DRIVER), 2.5 DLSS C/O W/RESI (PASSENGER)

Product Information

Thank you for purchasing Dirt Logic shocks, the finest off-road shock in the industry. Each unit is built to exacting standards and is properly tuned specifically for your vehicle. Dirt Logic shocks are designed and built to both beautify and upgrade your suspension system.

How To Care For Your Dirt Logic Shocks:
Dirt Logic shocks have been designed as a take-apart, serviceable, race- style unit. It will need to be maintained and periodically rebuilt for optimal performance. Here are some care instructions:

• Externally, keep the shock clean and free of dirt or corrosive elements. Wash with a pH balanced cleaner.
• Avoid abrasive cleaners or degreasers as they can harm the finish.
• Internally, high-performance seals may need replacement periodically for proper functioning.
• Do not remove tamper cap or reservoir hose to avoid voiding warranty.
• Do not remove the factory preload coil to maintain warranty.
• Return the shock in its original packaging for any warranty claims.

Product Usage Instructions

Installation of Driver Side Coilover (FT82074D):
Using the supplied 3/8 hardware, install the driver side coilover and torque to 45 ft-lbs. Refer to FIGURES 1-2 for guidance.

Mounting the Resi Mount:
Attach the resi mount to the frame by pre-drilling 9/32 holes and then secure using the supplied self-tapping bolts. Refer to FIGURES 4-5 for steps.

Attaching Lower Coilover:
Connect the lower coilover to the bar pin on the lower control arm using the supplied 7/16 hardware and torque to 70 ft-lbs. See FIGURE 3 for details.

FAQ

• Q: What is the warranty period for Dirt Logic Shocks?
  A: Dirt Logic Shocks come with a one-year warranty from the original date of purchase for defects in material or workmanship.

• Q: Can I adjust the Dirt Logic Shocks?
  A: Yes, a spanner wrench can be purchased for future adjustment. Follow proper procedures when making adjustments to avoid issues.

• Q: What should I do if I have questions about my Dirt Logic Shocks?
  A: Feel free to contact us for any inquiries regarding your Dirt Logic Shocks.

FT86127 – HARDWARE KIT

4| 5/16-18 X 1” SELF TAPPING BOLT|
6| 3/8-16 X 1” HEX BOLT|
6| 3/8” SAE WASHER|
6| 3/8” SPLIT LOCK WASHER|
4| 7/16-14 X 2-3/4” HEX BOLT|
8| 7/16” SAE WASHER|
4| 7/16-14 C-LOCK NUT|
4| HOSE CLAMP|

Thank you for purchasing Dirt Logic shocks, the finest off-road shock in the industry. Each unit is built to exacting standards and is properly tuned specifically for your vehicle. Dirt Logic shocks are designed and built to both beautify and upgrade your suspension system.

How To Care For Your Dirt Logic Shocks
Dirt Logic shocks have been designed as a take apart, serviceable, race style unit. That means, just like a race shock, it will need to be maintained and periodically rebuilt. The tight tolerances of this provide the exceptional ride and performance you are paying for but do require maintenance which is normal in a take apart shock like a Dirt Logic.
Externally, the shock should be kept clean at all times and kept free of dirt, road salt or other corrosive elements. The unit should be routinely washed with a pH balanced cleaner to keep the finish looking new. Do not use any abrasive or aggressive cleaners or degreasers as it will harm the finish for life including the aluminum anodizing.
Internally, the shock has high performance seals that allow the shock to cycle at very high rates and provide exceptional damping in aggressive off-road conditions. These seals are a wearable item and may need to be replaced periodically to keep the shock functioning correctly. Our in house Shock Lab is equipped to handle these needs when necessary.

Caution – Read Before Installing
Stop – Call FABTECH customer service if any component of this product is missing. Do not return it to the place of purchase! For technical assistance call: 909-597-7800
This Dirt Logic Shock is shipped pressurized with Nitrogen. Do not remove tamper cap or warranty will be void.
If this shock is equipped with a reservoir hose, do not loosen or remove the hose or warranty will be void.
If this shock is equipped with a coil, be aware that the coil has some amount of preload from the factory and should not be removed. Removal of the coil will void the warranty.
If this shock product needs to be returned for any reason, it must be returned in its original packaging or warranty will be void.
Dirt Logic Shocks come with a one year warranty from the original date of purchase for defects in material or workmanship.
A spanner wrench can be purchased for future adjustment. (FTS89905 for 4.0, FTS98008 for 2.5, FTS98006 for 2.0)
If adjustment is needed. Jack up the vehicle to relieve tension on the Dirt Logic coil over before making adjustments or the top cap may come loose.
Should you have any questions regarding your Dirt Logic Shocks, please feel free to contact us.

INSTRUCTIONS

1. Install the new FT82074D (Driver side coilover) using the supplied 3/8” hardware for the upper mount. Torque to 45 ft-lbs. SEE FIGURES 1-2
2. Attach the lower coilover to bar pin to the lower control arm using the supplied 7/16” hardware. Torque to 70 ft-lbs. SEE FIGURE 3
3. Mount the resi mount to the frame by pre drilling 9/32” holes then attach the mount using the supplied self tapping bolts. SEE FIGURE 4-5
4. Mount the resi to the mount using the supplied clamps. SEE FIGURE 6
5. Repeat steps on the passenger side using the FT82074P (Passenger side coilover)
6. Continue with the rest of the installation instructions for the other component parts.
   For technical assistance call: 909-597-7800

Product Warranty and Warnings –

• Fabtech provides a Limited Lifetime Warranty to the original retail purchaser who owns the vehicle, on which the product was originally installed, for defects in workmanship and materials.

• The Limited Lifetime Warranty excludes the following Fabtech items; bushings, bump stops, ball joints, tie rod ends, limiting straps, cross shafts, heim joints and driveshafts. These parts are subject to wear and are not considered defective when worn. They are warranted for 60 days from the date of purchase for defects in workmanship.

• Dirt Logic and Performance Coilover take apart shocks are considered a serviceable shock with a one year warranty on leakage only. Service seal kits are available separately for future maintenance. All other shocks are covered under our Limited Lifetime Warranty.

• Fabtech does not warrant any product for finish, alterations, modifications and/or installation contrary to Fabtech’s instructions. Alterations to the finish of the parts including but not limited to painting, powder coating, plating and/or welding will void all warranties. Some finish damage may occur to parts during shipping, which is considered normal and is not covered under warranty.

• Fabtech products are not designed nor intended to be installed on vehicles used in race applications or for racing purposes or for similar activities. (A “RACE” is defined as any contest between two or more vehicles, or any contest of one or more vehicle against the clock, whether or not such contest is for a prize). This warranty does not include coverage for police or taxi vehicles, race vehicles, or vehicles used for government or commercial purposes. Also excluded from this warranty are sales outside of the United States of America.

• Installation of most suspension products will raise the center of gravity of the vehicle and will cause the vehicle to handle differently than stock. It may increase the vehicle’s susceptibility to a rollover, on road and off road, at all speeds. Extreme care should be taken to operate the vehicle safely at all times to prevent rollover or loss of control resulting in serious injury or death. Fabtech front end Desert Guards may impair the deployment or operation of vehicles equipped with supplemental restraining systems/air bag systems and should not be installed if the vehicle is equipped as so.

• Fabtech makes every effort to ensure suspension product compatibility with all vehicles listed on the website, but due to unknown auto manufacturer’s production changes and/or inconstancies by the auto manufacturer, Fabtech cannot be responsible for 100% compatibility, including the fitment of tire and wheel sizes listed. The Tire and Wheel sizes listed in

• Fabtech’s website are only a guideline for street driving with noted fender trimming. Fabtech is not responsible for damages
  to the vehicle’s body or tires. Fabtech is not responsible for premature wear of factory components due to the installation of oversized tires and wheels.

• Fabtech’s obligation under this warranty is limited to the repair or replacement, at Fabtech option, of the defective product only. All costs of removal, installation or re-installation, freight charges, incidental or consequential damages are expressly excluded from this warranty. Fabtech is not responsible for damages and/or warranty of other vehicle parts related or non related to the installed Fabtech product. This warranty is expressly in lieu of all other warranties expressed or implied. This warranty shall not apply to any product that has been subject to accident, negligence, alteration, abuse or misuse as determined by Fabtech.

• Fabtech suspension components must be installed as a complete system including shocks as shown on our website. All warranties will become void if Fabtech parts are combined and/or substituted with other aftermarket suspension products. Combination and/or substitution of other aftermarket suspension parts may cause premature wear and/or product failure resulting in an accident causing injury or death. Fabtech does not warrant products not manufactured by Fabtech.

• Depending on the condition of the factory suspension components retained after the installation of a Fabtech suspension not all vehicles may have the same ride stance front to rear as described in the website. The blue color of suspension components shown in all Fabtech photographs are for display purposes only. Majority of all Fabtech components will be black specifically where noted with part numbers ending in BK.

• Installation of Fabtech product may void the vehicles factory warranty; it is the consumer’s responsibility to check with their local vehicle’s dealer for warranty disposition before the installation of the product. Some state laws may prohibit modification of suspension to a vehicle in whole or in part. It is the responsibility of the installer and consumer to consult local laws prior to the installation of any Fabtech suspension product to comply with such written laws.

• It is the responsibility of the distributor and/or the retailer to review all warranties and warnings of Fabtech products with the consumer prior to purchase.

• Fabtech reserves the right to super cede, discontinue, change the design, finish, part number and/or application of parts when deemed necessary without written notice. Fabtech is not responsible for misprints or typographical errors within the website or price sheet. For the most recent Product Warranty and Warnings visit our website www.fabtechmotorsports.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>