Waterdrop F701R Water Filters Replacement User Manual

Waterdrop F701R Water Filters Replacement

Product Information

Specifications

• System Model No.: EWF-8001S
• Certifications: Certified by WQA against NSF/ANSI Standard 42 and NSF/ANSI 372 (0.25% lead)

Operating Specifications

• Substance Reduction: Chlorine Taste and Odor
• Average Reduction: 92.70%
• Average Product Water Concentration: 0.05 mg/L
• Max Permissible Product Water Concentration: N/A
• Reduction Requirements: 50%

Features
The undersink water filter is a replacement for the previous model EWF- 8001S. It is certified by WQA against NSF/ANSI Standard 42 for the reduction of claims specified on the Performance Data Sheet. It is also certified to NSF/ANSI 372 for reducing lead content by 0.25%.

Storage and Maintenance
Proper storage and maintenance will ensure the longevity and optimal performance of your under-sink water filter:

1. Store the filter in a cool, dry place away from direct sunlight.
2. Replace the filter cartridge as recommended in the user manual.
3. Clean the filter housing regularly to prevent the buildup of sediment or contaminants.

A replacement for the following water filter
Filtrete® filter
3US-AF01
Filter life: 6 months or 6,000 gallons, whichever comes first will vary based on water condition.

Certified by WQA against NSF/ANSI Standard 42 in model EWF-8001S for the reduction of the claims specified on the Performance Data Sheet, and to NSF/ANSI 372 (0.25% lead).

Filter Features

• Economical alternative to expensive substitutes.
• Easy installation and operation.
• Provides cleaner, fresher water by reducing impurities.
• Designed to provide up to 6 months of life or 6,000 gallons.
• Does not remove minerals that may be beneficial to health.

Installation instructions

1. Place the pan under the filter to collect any residual water during cartridge change-out.
2. Grasp the cartridge and turn to the left (counterclockwise) until the cartridge comes to a complete stop (water automatically turns off ). Gently pull the cartridge downward to remove.
3. Ensure that o-rings are present on the cartridge and are seated into grooves; moisten o-rings with water. DO NOT use any petroleum products to lubricate the O-rings.
4. Align tabs of new filter cartridge with existing filter head and insert new filter cartridge into head. Turn the cartridge to the right (clockwise) until the cartridge stops.
5. Flush the new cartridge for 5 minutes.

Storage and maintenance

• Replace your filter every 6 months or 6,000 gallons to prevent bacteria and fungus growth in your filter, supply lines, and storage tank.
• Stored filters do not expire. Keep your unused filters in a cool, dark, and dry place until you need them.
• If you do not use your water dispenser for more than four days, run two gallons of water before using it to prevent bad-tasting water.

Frequently asked questions

• Q: Do I need to remove the filter before descaling equipment?
  A: Yes, remove the filter before descaling and inspect for integrity if needed replace it with a new filter.

• Q: Why are there black specks in the water or why does my water taste funny?
  A: Water filters are made from the purest carbon blocks. When the filter ships, it bounces around and knocks carbon granules loose from the block. These little carbon granules are called fines. All of the quality filters in the marketplace require preliminary flushing to remove the carbon fines. Some systems may need to be flushed more than once. This is especially true if you have scale or 　lime water. If you go on vacation and do not use your filtered water for several days, flush the systems again to remove any stagnant water.

• Q: If I do not change my filter every 6 months, can this damage the system?
  A: Yes, you must replace the filter every 6 months or sooner if water flow is reduced or if there is heavy sediment/rust present. Filters left in longer will fatigue, degrading filter performance.

Warning:
To reduce the risk of property damage due to water leakage, this filter MUST be installed by the manufacturer’s specifications and instructions. This filter unit must be replaced every 6,000 gallons or 6 months. Failure to follow instructions and operating specifications will void your warranty. Further, the manufacturer assumes no responsibility or liability for damages arising out of misuse of the product. Filtrete® is a registered trademark of 3M Company. Filtrete® is used for reference purposes only.

• The service life mentioned above is subject to chlorine reduction.
• Actual result varies according to the local water quality.
• The system and installation shall comply with applicable state and local regulations.

Performance data sheet

System Model No.: EWF-8001S

Operating specifications:

• Operating Temperature: 35 -100°F/2 – 38°C
• Working Pressure: 10 -100 psi/0.7 – 6.8 bar
• Rated Capacity: 6,000 gallons/22,712 litres
• Flow Rate: 0.75 gpm/2.84 Ipm

Substance reduction:
The system has been tested and certified by WQA according to NSF/ANSI Standard 42 and NSF/ANSI Standards 372. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for the water leaving the system, as specified by NSF/ANSI Standard 42. While testing was performed under standard laboratory conditions, actual performance may vary.

System to be used with municipal or well water sources treated and tested regularly to ensure biologically safe quality. Do not use water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Note: Testing was performed under standard laboratory conditions, actual performance may vary.

Manufacturer Technical Support

• service@water-filter.com
• 1-888-352-3558 (U.S.)

Made in China V040
Qingdao Ecopure Filter Co., Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>