Cloudy Bay LJD005SMG2WH RGB Smart Recessed Lighting with Gradient Accent Light and Night Light Installation Guide

Cloudy Bay LJD005SMG2WH RGB Smart Recessed Lighting with Gradient Accent

Light and Night Light

Product Information

Specifications:

• Model: LJD005SMG2WH-6PK
• Size: 3 Inch
• Features: With Backlight
• Dimensions: 6 x 6 x 18 inches
• Weight: 79mm (3-1/16 in)
• Additional Info: Wire Clamp Excluded

Product Usage Instructions:

1. Ensure the wire clamp is excluded.
2. Raise the clips to the vertical position.
3. Insert the light into the hole until it is fixed properly above the ceiling.

FAQs

Q: How do I activate the backlight feature?

A: The backlight feature can be activated using the voice control guide provided in the user manual.

Q: Can the light be dimmed?

A: Yes, the light can be dimmed using compatible dimmer switches. Refer to the user manual for compatibility details.

Q: What is the warranty period for this product?

A: The warranty period for this product is [insert warranty period here]. Please refer to the warranty section in the user manual for more details.

PRODUCT CARE

After Sales Service

1. Please discontinue to use of the product right away if the product shows any visible defect and contact customer service.
2. If there is any problem with our lights for non-human reasons, please contact customer service, we will send you a brand new replacement without the need to return goods or full refund.
3. If you are not completely satisfied with the product after installation but prefer not to disassemble it, contact us right away, we will provide comparable compensation.

PACKAGE CONTENTS

INSTALLATION INSTRUCTIONS

1. Turn off power at the source.
2. Make a hole in the celling with a template in the package
3. Carefully remove the knock-out with a screwdriver or punch.
4. open the connectors dex cover, reed story wire Into knockout nole using. connector and make all connections inside the junction box using the Ez connectors see picture below. Connect the 20y line wire to the black wire, and connect the neutral wire. to the white wire. Connect a bare copper wire to the inner terminal of the outlet box. Put only the junction box cover.
5. Raise clips to a Vertical Position and insert the light into the hole until the light is fixed properly above the ceiling.
6. See user manual to set up those lights

Note: This product is a smart light, using Direct Digital Controls rather than triac dimming. Here are two dimming ways for your reference:

• Download the Cloudy Bays APP, go to the product group or single product page, and adjust the brightness and CCT of white light or color light on the control panel; you can also go to the home page, click product group or single product’s common function, adjust brightness and color temperature

• Control with a smart voice device such as Google Assistant or Amazon Alexa if you have installed it successfully. If you only have a dimmer at hand, set it to the highest level only. If light performance is not good,
  we strongly advise you to change it to a regular switch.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

3-Year Limited Warranty

LIMITED WARRANTY:

This fixture is warranted to be free from defects in workmanship and material for up to 3 years. Based upon reasonable household usage, when used in accordance with package and included instructions. If this fixture does not last for the time period guaranteed, the manufacturer will send you a replacement fixture upon receipt of the returned fixture, register receipt, and proof of purchase. To contact us, please email us at smart@cloudybaylighting.com to find out how to return the fixture. We are committed to making high-quality products. Returning the fixture will help us monitor and further improve product quality. This replacement is the sole remedy available, and LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED.|

CONTACT INFORMATION

QUESTIONS? COMMENTS? SUGGESTIONS? COMPLAINTS?

• Please contact us through
• Toll-Free Phone Number: (1) 877-870-5171
• smart@cloudybaylighting.com or info@cloudybaylighting.com
• We will do our best to make it right for you. Thank you very much!

GENERAL: All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, contact and obtain the services of a qualified electrician. Use UL or IEC-approved wire only for input/output connections.Remove fixture and mounting components from the box, and make sure that no parts are missing, by referencing the illustration in the illustration instructions.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>