Qbic FHD-200 Box PC User Guide
- August 30, 2024
- Qbic
Table of Contents
Qbic FHD-200 Box PC
Product Specifications
- Model: FHD-200
- Color: Subject to changes
- Input Voltage: 100-240VAC
- Input Current: 0.25-0.5A
- Output Voltage: 5V
- Output Current: 2A
- Max Power Output: 10.0W
Product Usage Instructions
Care and Warning
WARNING: Changes or modifications not approved may void user’s authority
to operate the equipment.
NOTE: 4k60p outputs only in YUV420 color space.
This equipment complies with Class B digital device standards and FCC Rules.
Take precautions to avoid harmful interference.
Correct Disposal
This product should not be disposed of with household waste. Recycle
responsibly to protect the environment.
RTC Battery Caution
Risk of explosion if battery is replaced incorrectly. Dispose of used batteries according to instructions.
Power Adaptor Information
- Model No.: PSM10R-050
- INPUT: 100~240VAC, 0.25~0.5 A
- OUTPUT: 5V 2A MAX 10.0W
Frequently Asked Questions (FAQ):
Q: Can I use a different power adaptor with the FHD-200 model?
A: It is recommended to use the specified power adaptor (Model No.:
PSM10R-050) to ensure compliance and safe operation.
Quick Start Guide
This quick guide will help you go through installation quickly
Color and appearance may be subject to changes upon product enhancements or
updates without prior notice.
To download QSG in different language, please go to the website:
https://qrgo.page.link/NtCC8
If you have any problem to access the website, please send your request with
the device serial number to support@qbictechnology.com
Content
Indicators
- DC-5V
- USB 3.0
- USB 2.0
- HDMI
- LAN
- Status Light
- Micro SD
- ADB (Service)
- Reset Button
Installation
-
Cable Connections
-
VESA Mount
Screw 2 screws to secure the VESA mount bracket onto the system
Screw 4 screws onto the back of a VESA 75/75-compatible display -
Velcro Mount
- Velcro mount should only be used when device height is less than 2 meters from the ground.
- Please ensure the mounting surface is smooth and clean before using the velcro strip.
CARE AND WARNING
WARNING: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: 4k60p outputs only in YUV420 color space.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/box PC technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Correct Disposal of this product. This marking indicates that this product
should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
Operation Temperature: 0~60°C (32~140°F)
RTC Battery Caution
Risk of explosion if battery is replaced by an incorrect type. Disposed of
used batteries according to the instructions.
- Adaptor must be used with this equipment to ensure compliance with the Class B FCC limits.
- Power Adaptor information:
- Model No.: PSM10R-050
- INPUT: 100~240VAC, 0.25~0.5 A
- OUTPUT: 5V 2A MAX 10.0W
www.qbictechnology.com
Tel: +886-2-2697-2000
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>