Qbic Technology TD-0360 Panel PC User Guide
- May 15, 2024
- Qbic Technology
Table of Contents
Qbic Technology TD-0360 Panel PC User Guide
[https://qbictechnology.zendesk.com/auth/v2/login/signin?return_to=https%3A%2F%2Fsupport.qbictechnology.com%2Fhc%2Fen-us&theme=hc&locale=en-us&brand_id=618817&auth_origin=618817%2Ctrue%2Ctrue](https://qbictechnology.zendesk.com/auth/v2/login/signin?return_to=https%3A%2F%2Fsupport.qbictechnology.com%2Fhc%2Fen-us&theme=hc&locale=en-us&brand_id=618817&auth_origin=618817%2Ctrue%2Ctrue)Contents
Indication
Installation
CARE AND WARNING
WARNING:
Changers or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/panel PC technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
″FCC & CE RF Radiation Exposure Statement Caution: To maintain compliance with the FCC & CE′s RF exposure guidelines, place the product at least 20cm from near by persons.″
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This product complies with ISED radiation exposure limits set forth for an
uncontrolled environment.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
This product should be installed and operated with minimum distance 20 cm
between the radiator and your body.
For products available in the USA/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
For LE-LAN devices
i. the device for operation in the band 5150–5250 MHz is only for indoor use
to reduce the potential for harmful interference to co-channel mobile
satellite systems;
ii. the maximum antenna gain permitted for devices in the bands 5250-5350 MHz
and 5470-5725 MHz shall be such that the equipment still complies with the
e.i.r.p. limit;
Declaration of Conformity
This device complies with the requirements set out in the Council Directive on
the Approximation of the Laws of the Member States relating to Electromagnetic
Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive
(2009/125/EC), RoHS directive (2011/65/EU) and Radio Equipment Directive
(2014/53/EU).
This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these harmonized standards published under Directives of Official Journal of the European Union.
Adaptor with ferrite must be used with this equipment to ensure compliance
with the Class B FCC limits.
Specifications of the DC power adapter
Model: SOY-0500200-090/PSAF10R-050Q
Input: 100-240V~50/60Hz 0.5A Max
Output: 5V 2A
NOTE : Operating Temperature: 0~40°C
Qbic Technology Co., Ltd.
26F.-12, No 99, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City 22175,
Taiwan (R.O.C)
Tel: 886-2-2697-2000 / FAX: 886-2-2697-2868