SMARTLED BXLEDST5M21 Led Strip User Manual

SMART LED

LED STRIP

User manual
BXLEDST5M21

Technical information

Power: 18W
Luminous flux: 1000 lm
LED pieces per metre: 60
Colour: CCT (Warm White + Cool White)
Temperature: 3000K–6500K
Lifespan: 15,000h
CRI: RA > 80
Measures: 5m x 10mm
Fixation: 3M Adhesive
Voltage: 220-240V/50-60hz
IP44: Protection against dust and splashes
Connection: Bluetooth + WiFi
Voice Assistant: Amazon Echo and Google Home
Compatible with: Android 4.1 / iOS 8.0 and later
App: TuyaSmart and Smart Life

Box contents

1 x LED Strip
1 x Remote Control
1 x AC Adapter
1 x Infrared Receiver
5 x Connectors
1 x User manual

1. Installation

1. Atención: asegúrese de conectarlo como indican las flechas o la luz no funcionará.
2. Entrada DC12V
3. Sensor de infrarrojos

(1) AC adapter
(2) IR Sensor

Attention: Make sure to connect it as indicated by the arrows or the light will not work.

Note: Once the LED Strip has been cut, you can attach each of the parts with the help of the 5 connectors included in the box.

2. Download the app

• To download the app, scan the QR code.
• You can also search the app in the App Store or Google Play.

3. Register

1. If you don’t have an account in the App, sign up and then sign in with the verification code.
2. Enter your email and click on “Get verification code”. Enter the verification code you will receive in your email.
3. Set the password and press “Finished” to complete registration.

4. Add your device

1. First, turn on the Bluetooth and WiFi of your phone.
2. Open the app and tap “Add Device” or “+” in the top right corner.
3. Select your smart device from the list of devices or use the automatic scan to find it directly.
4. Turn on the device and wait until it flashes to confirm and select the type of flashing.

• If the device does not flash, turn it on and off 4 consecutive times. At the 5th time leave the device on and it will start flashing. In order for this process to work, it should be done in less than 10 seconds. Confirm and select the type of flashing. 5. Next, select the 2.4 GHz WiFi network, enter the router password and wait while the app finds the device. Add the device by tapping on the “+” symbol. Once it has been added, tap “Finished”.

Note

1. Make sure to connect the LED Strip parts in the correct position to make contact between the different parts.
2. To ensure a correct synchronization with your mobile, it is necessary to accept all the accesses requested by the app.
3. To connect for the first time, it is necessary to be connected to a Wifi network. Make sure that the light flashes quickly and that the WiFi password you entered is correct. (The connection process may take several minutes, please be patient).
4. After the first connection, you can use a new WiFi or mobile data network to control the device at any time and from any location.
5. Only compatible with 2.4 GHZ WLAN, Android 4.1 and above and IOS 8.1 and above. Do not use 5G WiFi.
6. The first connection should be made close to the router to ensure a faster connection.
7. When connecting multiple devices to the WiFi network, do not put them too close together as this may cause signal interference.

5. Control your device

• After successful configuration, the device will be displayed on the “Devices” page. Tap on the device icon to control its operation.

Selection of whites

• Go to the first tab on the main screen and tap on “White”. From here, you can select the CCT white light you are looking for. Simply move your finger around the colour circle.
• You can also adjust the brightness from 1 to 100% using the bar at the bottom of the screen.
• You will also be able to configure the synchronisation with your circadian rhythm.
• Circadian rhythms are all the physical and mental changes that respond to the light and darkness present during the course of a day. Synchronising your lighting with your biorhythms can help improve your quality of life, reduce stress and increase productivity.
• In the following section you can learn how to set the temperature and brightness of the light to mimic the natural cycle it follows during different times of the day. Yellows, oranges and soft tones mimic the sun at dawn and dusk, while cool light is best suited to promote concentration and attention.

Planner

Sleep

• Go to the “Plan” screen and click on the “Add to” button. Click on “Sleep plan” to access the settings screen. From there, you can set the time to turn off the light and the days of the week on which this action will be repeated.
• Slide your finger across the bar to change the duration of the light switch-off. The intensity of the light will decrease until it switches off completely at the desired time.
• By activating the “Customize” option you can choose the type of light and customise the saturation and brightness.

Wake up

• From the same menu you can adjust the switch-on time by clicking on “Wake up plan”.
  By sliding your finger on the “Fade-in” bar, you can change the duration of the light switch-on time, which will help you to wake up in a natural way by gradually increasing the intensity of the light.

• From the “Last Time” bar, you can set the time when the light switches off.

• By activating the “Customize” option you can choose the type of light and customise the colour, saturation and brightness.

Scene modes

• To activate scene modes, you will need to tap on the “Scene” tab on the home screen, located at the top of the screen.
• From here, you can choose between the different scene modes provided by the App.

Program the hours of light

• Through the app you can also program the hours when the lights are switched on and off. Click on the clock icon and choose the time and weekly slots, as well as the notification system you need to control your lights.

6. Remote control

neutro; Cool: frío
White balance| Sequence of the different intensities of CCT whites
Modes| Selection of the different preset modes
Day moments| Selection of the right lighting for the different times of the day

7. Voice Assistants

• To set up your voice assistants through the app, you will need to tap on the top right corner and then tap on the “Edit” icon.
• From here you can permit access to third parties to control the lights, such as Alexa and Google Home.
• You can adjust the brightness, change the colour, or simply turn the light on and off with just a few words.

8. More about the App

You can adjust the different functions from the menu button at the top right corner of the App.

1. The device name can be changed as desired.
2. Device information.
3. Tap-to-Run and Automation allows you to check the Intelligent Automation to which your device is linked.
4. Supported third-party control provides information on how to connect your device with Amazon Alexa, Google Assistant.
5. Disconnection notice: allows you to alert yourself when your device is offline.
6. Create “Group” to control another smart device at the same time.
7. FAQ & Feedback allows users to report issues and obtain assistance.
8. Add to Home Screen allows you to add the smart device to your smartphone’s home screen.
9. Check the network of the device to check the status of the network connection.
10. Firmware information allows you to check the software or install updates on the device.
11. Restore factory settings: Allows you to reset the factory settings of the smart device.

Maintenance recommendations

• Regularly clean the product with a dry cloth. The product must be disconnected or switched off when cleaned.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
• Do not wet or submerge any parts connected to the current.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
• Avoid dropping or hitting the product. That might damage it.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.

Safety information

Please read the following instructions before using the device for the first time:

• When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
• Do not use the product if it is wet or damaged.
• Do not use the product with wet hands.
• Do not leave the product in contact with flammable materials.
• Do not expose the product to high temperatures (for example: inside a car during hot weather).
• Do not throw the product into fire.
• Keep the product away from children.
• Disconnect or switch off the product if you are not going to use it for a long period of time.
• Do not use the product if you perceive any visible defects.
• Do not attempt to open or puncture the product. You might damage it.
• Do not use the product with incompatible devices.
• Do not disassemble or modify the product. These actions will invalidate the Warranty.

Legal Note

Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product. Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.

Electronic and electrical devices disposal

This symbol indicates that electrical and electronic equipment is to be collected separately.

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
• If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
• Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
• The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
• For more information, contact the retailer or the local authorities in charge of waste management.

Warranty: The 3-year warranty does not apply to products with consumable parts or parts subject to wear, except for defects in materials or manufacturing.

CE Declaration of Conformity

We hereby declare that the product (s) listed below satisfies the provision for CE-marking according to the following European directive(s):

EN IEC 55015:2019+A11
EN 61547:2009
EN 61000-3-3:2013+A1+A2
EN IEC 61000-3-2:2019+A1

Article: BXLEDST5M21
EAN: 8427542125923

Manufacturer:
ATLANTIS INTERNACIONAL, S.L.
Address:
Carrer del Crom, 53, 08907 L’Hospitalet de Llobregat, Barcelona (Spain)
Place and date of the declaration:
L’Hospitalet de Llobregat, September, 1st 2022

Nico Broder
General Manager

Documents / Resources

| SMARTLED BXLEDST5M21 Led Strip [pdf] User Manual
BXLEDST5M21 Led Strip, BXLEDST5M21, Led Strip, Strip
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>